[DECtalk] Access 32 On Windows 7
Brandon Misch
bmisch2002 at gmail.com
Mon May 9 08:53:26 EDT 2011
with the original release of jaws 10 you don't need to do that since it worked then. however, if it's a later version you probably need to
On May 9, 2011, at 7:55 AM, Michael Hansen wrote:
> I tried uninstalling Eloquence, with the JAWS 12 Access 32 driver back
> in, and I am still getting the shared components error. I'll perhaps
> try this with JAWS 10 and see what happens.
>
> On 5/9/11, Michael Hansen <amtk62 at gmail.com> wrote:
>> Thanks for that, Brandon...I didn't try going back to the JAWS 12
>> Access 32 driver. I'll try that and let you guys know.
>>
>> On 5/9/11, Brandon Misch <bmisch2002 at gmail.com> wrote:
>>> well, before you did that did you replace the access 32 jaws driver or
>>> was
>>> the one you got out of jaws 10 still there? think you have to go back to
>>> the
>>> driver that is in with jaws 12 to get this to work. me personally, i am
>>> glad
>>> i have a dectalk u s b otherwise, i would still be sending fs emails
>>> about
>>> broken access 32 support.
>>>
>>> On May 9, 2011, at 1:25 AM, Michael Hansen wrote:
>>>
>>>> Well, I got an error from JAWS 12 when I tried starting JAWS after
>>>> uninstalling Eloquence. What version did you try this with, and did
>>>> you have this problem? Thanks, Michael
>>>>
>>>> On 5/8/11, Michael Hansen <amtk62 at gmail.com> wrote:
>>>>> Thanks, Alex! I'll give that a shot! If I have trouble, I'll
>>>>> reinstall JAWS--I also have NVDA.
>>>>>
>>>>> On 5/8/11, Alex H. <linuxx64.bashsh at gmail.com> wrote:
>>>>>> Hi,
>>>>>>
>>>>>> try uninstalling Eloquence. It's a dirty rotten hack, but it works.
>>>>>> Also, it's perminent, so DT only gets used.
>>>>>>
>>>>>> When I did this when I still used JAWS, there was some wierd parameter
>>>>>> values and I had to play with the rate and pitch sliders for them to
>>>>>> snap back into action.
>>>>>>
>>>>>> HTH,
>>>>>> Alex
>>>>>>
>>>>>> On 5/7/11, Michael Hansen <amtk62 at gmail.com> wrote:
>>>>>>> Hi guys,
>>>>>>>
>>>>>>> I just recently obtained a copy of DECtalk Access 32 from school.
>>>>>>> This is the version of DECtalk distributed with Kurzweil 1000. Is
>>>>>>> there any way of making it work with JAWS on Windows 7? The program
>>>>>>> runs--it shows as running in task manager--but it is still not
>>>>>>> working
>>>>>>> with JAWS.
>>>>>>>
>>>>>>> Thanks,
>>>>>>> Michael
>>>>>>> _______________________________________________
>>>>>>> DECtalk mailing list
>>>>>>> DECtalk at bluegrasspals.com
>>>>>>> http://bluegrasspals.com/mailman/listinfo/dectalk
>>>>>>>
>>>>>> _______________________________________________
>>>>>> DECtalk mailing list
>>>>>> DECtalk at bluegrasspals.com
>>>>>> http://bluegrasspals.com/mailman/listinfo/dectalk
>>>>>>
>>>>>
>>>> _______________________________________________
>>>> DECtalk mailing list
>>>> DECtalk at bluegrasspals.com
>>>> http://bluegrasspals.com/mailman/listinfo/dectalk
>>>
>>>
>>> _______________________________________________
>>> DECtalk mailing list
>>> DECtalk at bluegrasspals.com
>>> http://bluegrasspals.com/mailman/listinfo/dectalk
>>>
>>
> _______________________________________________
> DECtalk mailing list
> DECtalk at bluegrasspals.com
> http://bluegrasspals.com/mailman/listinfo/dectalk
More information about the Dectalk
mailing list