[Rwp] EQ, frequencies, spectrum analizers?

[Juan Bello]

alright, and I suppose this is all done from the fx window, or the
osara parameter editing window? any accessible or .. usable spectrum
analizers?

and the js: tone generator plug in is fully accessible, I didn't
realize you could tab around in its main fx window and edit the value
of the base frequency for the generate tone, then press something like
tab or shift tab to apply the value. Of course it works in a
parametric way too with the osara editing windows but again you don't
have much control over the setting of the base frequency.

2016-01-30 3:16 GMT-05:00, Justin <justinmacleod at hotmail.com>:
> thing is, while that works in most situations, what if the problem
> frequency is beyond the range of your hearing, either because it's
> sub-sonic or just too high to hear, particularly if you're recording at
> high sample rates or if you're just getting on in years.
>
> Plus spectrum analysers can provide a quick fix if you're using less
> than ideal equipment or working in a less than ideal listening environment.
>
> For example, if you're in a bad acoustic environment, frequencies may
> sound problematic that actually aren't because of standing waves,
>
> Justin
>
> On 30/01/2016 05:13, Chris Belle wrote:
>> I just use what ever material I want to fix.
>> Something that is muddy or has a problem frequency.
>> If you make a narrow q,
>> For instance  something like
>> re-eq,
>> then you set the q down low to something like 0.5 and then exagerate
>> the frequency
>> by tturning up the gain to a high value.
>> Then   you sweep the frequency up and down.
>> Any place you hit which has an abundance of a frequency will really
>> sonically stick out.
>> So then you can find your center point and pull it down to taste.
>> Nothing like using your ears.
>>
>> On 1/29/2016 6:46 AM, Juan Bello wrote:
>>> hi list.
>>>
>>> I finally got everything going again with this computer, including
>>> nice recording equipment so am all set and probably overly excited!
>>> But today the question is about mixing, and EQ. There is a very
>>> interesting article on Sonic scoop that talks about subtractive EQ.
>>> that is, you take out some evidently probelmatic EQ bands to improve
>>> the sounds of individual instruments. They suggest using a spectrum
>>> analizar but also a plug in that is able to isolate that problematic
>>> band so you can compare and ocntrast differences. Apparently boosting
>>> certain bands helps exaggerate or better identify the problema, and
>>> they also suggest starting with an EQ sweep, a term I am probably no
>>> too familiar with. So, now that i got that all of the way, what are
>>> recommended ways to do this from an accesible standpoint?
>>>
>>> also, is there a frequency, square or shine wave generator i can use
>>> to do the classic hearing test with the monitors i have?
>>>
>>> Thankful for all the list has done. I didn't find anything related
>>> when searching the archives, so this is why I am asking all of this
>>> pretty basic stuff.
>>>
>>
>> _______________________________________________
>> RWP mailing list
>> RWP at bluegrasspals.com
>> http://bluegrasspals.com/mailman/listinfo/rwp
>
> _______________________________________________
> RWP mailing list
> RWP at bluegrasspals.com
> http://bluegrasspals.com/mailman/listinfo/rwp
>


-- 
Juan Pablo Bello
Cel. 313-879-2884