[Rwp] sidechaining revisited.

[Roger Alexanderson]

ok guys, i googled around a bit more and found others had same problem 
with the triggering stuff, it turns out the source midi has to be set to 
none in order for this to work.
thanks anyway guys.
happy reaping!


Den 2016-01-09 kl. 12:46, skrev Roger Alexanderson via RWP:
> here's an explanatory audio clip i made a few minutes ago guys, in 
> case you got my question wrong or twisted.
> https://drive.google.com/file/d/0B9TcgTeHA8VzMmhJSldJMWY0TFk/view?usp=sharing 
>
> happy reaping!
>
>
> Den 2016-01-09 kl. 02:08, skrev Chris Belle:
>> he's got himself all twisted about I think he's getting elements of 
>> his drum track griggering his bass track.
>> I don't know what synth he's using, but according to the imformation 
>> we have, he needs to separate his midi tracks and send to different 
>> instances of the synth,
>> so each element can have it's own audio track.
>> Then side chain as directed.
>>
>>
>> On 1/7/2016 5:10 PM, Justin wrote:
>>> Hi,
>>>
>>> I'm afraid I don't understand Roger's latest question as the 
>>> applications for which I use Reaper are not primarily musical.
>>>
>>> The reason you use channels three and four on a stereo track is that 
>>> they serve as the auxilliary channels. There's no audio that will be 
>>> coming out across the master and therefore to your final mix on 
>>> them, so they can be used for applications like this,
>>>
>>> Justin
>>>
>>> On 07/01/2016 10:40, Roger Alexanderson via RWP wrote:
>>>> hi i have done all that but now what happens is the bass-track also 
>>>> plays the key for the kick, sounds rather weird :)
>>>>
>>>>
>>>> Den 2016-01-07 kl. 00:08, skrev Justin:
>>>>> This is the bit that very much depends on what screen reader you 
>>>>> are using and what accessibility extension. If you are using rea 
>>>>> access, it's very simple, just select the sending track, press 
>>>>> shift i and tab through til you find the relevant box.
>>>>>
>>>>> If you're using Osara, it can all be achieved by pressing i, but 
>>>>> you have to use your Jaws cursor/NVDA review cursor to find the 
>>>>> right bit. Or you can, and this is much simpler, with the newest 
>>>>> version of Osara, find the delete button that pertains to the send 
>>>>> you want and hit applications key on it. n.b. shift f10 will not 
>>>>> work. Then the context menu that results will contain the option 
>>>>> you want.
>>>>>
>>>>> Hope this helps,
>>>>>
>>>>> Justin
>>>>>
>>>>>
>>>>>
>>>>> On 06/01/2016 22:15, Roger Alexanderson via RWP wrote:
>>>>>> yeah right,
>>>>>>
>>>>>> Den 2016-01-06 kl. 19:11, skrev Justin:
>>>>>>> If you change the parent channels you will be changing the 
>>>>>>> channels for the whole project being as the parent is the master 
>>>>>>> track. You want to change the number of channels for the 
>>>>>>> receive. This is be because you still need to add the compressor 
>>>>>>> to the track you want to be changed, albeit to different 
>>>>>>> channels from normal.
>>>>>>>
>>>>>>> Justin
>>>>>>>
>>>>>>> On 06/01/2016 12:31, Roger Alexanderson via RWP wrote:
>>>>>>>> yeah it helped a bit, i'm in the config dialogue but which 
>>>>>>>> combo should i change, the recieve or parent channels?
>>>>>>>>
>>>>>>>>
>>>>>>>> Den 2016-01-06 kl. 04:45, skrev Justin:
>>>>>>>>> Hi,
>>>>>>>>>
>>>>>>>>> make your bass track, I assume you want to use your kick to 
>>>>>>>>> duck the bass track, a four-channel track.
>>>>>>>>>
>>>>>>>>> Send the kick to channels three and four of the bass track 
>>>>>>>>> rather than 1 and two.
>>>>>>>>>
>>>>>>>>> Add reacomp or your compressor capable of side-chaining of 
>>>>>>>>> choice to the bass track.
>>>>>>>>>
>>>>>>>>> Enable its detector output, which will mean that it is 
>>>>>>>>> scanning your auxilliary channels, i.e. 3 and 4 for the 
>>>>>>>>> envelope to follow rather than 1 and 2.
>>>>>>>>>
>>>>>>>>> configure compressor to taste. Job done.
>>>>>>>>>
>>>>>>>>> All these changes, designating number of channels per track 
>>>>>>>>> and to which channels audio should be sent, can be configured 
>>>>>>>>> from the track routing dialogue, accessed by pressing i.
>>>>>>>>>
>>>>>>>>> Hope this helps,
>>>>>>>>>
>>>>>>>>> Justin
>>>>>>>>>
>>>>>>>>> On 05/01/2016 21:06, Roger Alexanderson via RWP wrote:
>>>>>>>>>> hi guys!
>>>>>>>>>> i haven't been reaping for a while now due to computer issues 
>>>>>>>>>> and downgrading back to win7.
>>>>>>>>>> now, when i'm getting up and reaping again, i realized that 
>>>>>>>>>> i've forgot about the sidechaining stuff i brought up some 
>>>>>>>>>> time ago, it was something about adding a send from the kick 
>>>>>>>>>> and then use the reacomp for sidechaining.
>>>>>>>>>> can someone please refresh my memory.
>>>>>>>>>> thanks
>>>>>>>>>> happy reaping!
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> RWP mailing list
>>>>>>>>> RWP at bluegrasspals.com
>>>>>>>>> http://bluegrasspals.com/mailman/listinfo/rwp
>>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> RWP mailing list
>>>>>>> RWP at bluegrasspals.com
>>>>>>> http://bluegrasspals.com/mailman/listinfo/rwp
>>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> RWP mailing list
>>>>> RWP at bluegrasspals.com
>>>>> http://bluegrasspals.com/mailman/listinfo/rwp
>>>>
>>>
>>> _______________________________________________
>>> RWP mailing list
>>> RWP at bluegrasspals.com
>>> http://bluegrasspals.com/mailman/listinfo/rwp
>>>
>>
>> _______________________________________________
>> RWP mailing list
>> RWP at bluegrasspals.com
>> http://bluegrasspals.com/mailman/listinfo/rwp
>
> _______________________________________________
> RWP mailing list
> RWP at bluegrasspals.com
> http://bluegrasspals.com/mailman/listinfo/rwp