[Rwp] sidechaining revisited.

[Justin]

Press I on your bass track and tab til it says track channels. this is a 
combo box and the default number of channels is two. Cursoring down once 
will change to four,

Justin

On 06/01/2016 13:00, Roger Alexanderson via RWP wrote:
> oh, i found that combo for the number of tracks, but where do i find 
> where to put it, to 3 and 4?
>
> Den 2016-01-06 kl. 04:45, skrev Justin:
>> Hi,
>>
>> make your bass track, I assume you want to use your kick to duck the 
>> bass track, a four-channel track.
>>
>> Send the kick to channels three and four of the bass track rather 
>> than 1 and two.
>>
>> Add reacomp or your compressor capable of side-chaining of choice to 
>> the bass track.
>>
>> Enable its detector output, which will mean that it is scanning your 
>> auxilliary channels, i.e. 3 and 4 for the envelope to follow rather 
>> than 1 and 2.
>>
>> configure compressor to taste. Job done.
>>
>> All these changes, designating number of channels per track and to 
>> which channels audio should be sent, can be configured from the track 
>> routing dialogue, accessed by pressing i.
>>
>> Hope this helps,
>>
>> Justin
>>
>> On 05/01/2016 21:06, Roger Alexanderson via RWP wrote:
>>> hi guys!
>>> i haven't been reaping for a while now due to computer issues and 
>>> downgrading back to win7.
>>> now, when i'm getting up and reaping again, i realized that i've 
>>> forgot about the sidechaining stuff i brought up some time ago, it 
>>> was something about adding a send from the kick and then use the 
>>> reacomp for sidechaining.
>>> can someone please refresh my memory.
>>> thanks
>>> happy reaping!
>>>
>>
>> _______________________________________________
>> RWP mailing list
>> RWP at bluegrasspals.com
>> http://bluegrasspals.com/mailman/listinfo/rwp
>