[Rwp] sidechaining revisited.

[Justin]

If you change the parent channels you will be changing the channels for 
the whole project being as the parent is the master track. You want to 
change the number of channels for the receive. This is be because you 
still need to add the compressor to the track you want to be changed, 
albeit to different channels from normal.

Justin

On 06/01/2016 12:31, Roger Alexanderson via RWP wrote:
> yeah it helped a bit, i'm in the config dialogue but which combo 
> should i change, the recieve or parent channels?
>
>
> Den 2016-01-06 kl. 04:45, skrev Justin:
>> Hi,
>>
>> make your bass track, I assume you want to use your kick to duck the 
>> bass track, a four-channel track.
>>
>> Send the kick to channels three and four of the bass track rather 
>> than 1 and two.
>>
>> Add reacomp or your compressor capable of side-chaining of choice to 
>> the bass track.
>>
>> Enable its detector output, which will mean that it is scanning your 
>> auxilliary channels, i.e. 3 and 4 for the envelope to follow rather 
>> than 1 and 2.
>>
>> configure compressor to taste. Job done.
>>
>> All these changes, designating number of channels per track and to 
>> which channels audio should be sent, can be configured from the track 
>> routing dialogue, accessed by pressing i.
>>
>> Hope this helps,
>>
>> Justin
>>
>> On 05/01/2016 21:06, Roger Alexanderson via RWP wrote:
>>> hi guys!
>>> i haven't been reaping for a while now due to computer issues and 
>>> downgrading back to win7.
>>> now, when i'm getting up and reaping again, i realized that i've 
>>> forgot about the sidechaining stuff i brought up some time ago, it 
>>> was something about adding a send from the kick and then use the 
>>> reacomp for sidechaining.
>>> can someone please refresh my memory.
>>> thanks
>>> happy reaping!
>>>
>>
>> _______________________________________________
>> RWP mailing list
>> RWP at bluegrasspals.com
>> http://bluegrasspals.com/mailman/listinfo/rwp
>