[Rwp] Compressor on kick (track 1), for attenuate track 2 at each hit ?

[Justin M]

Really glad it was helpful :)

Justin

On 20/04/2016 11:53, TheOreoMonster wrote:
> This is call side chaining and here is a helpful note that was posted 
> to the list some time ago on how to do this.
>
> make track 2 a four-channel track.
>
> Send the kick to channels three and four of track 2 rather than 1 and two.
>
> Add reacomp or your compressor capable of side-chaining of choice to 
> track 2.
>
> Enable its detector output, which will mean that it is scanning your 
> auxilliary channels, i.e. 3 and 4 for the envelope to follow rather 
> than 1 and 2.
>
> configure compressor to taste..
>
> All these changes, designating number of channels per track and to 
> which channels audio should be sent, can be configured from the track 
> routing dialogue, accessed by pressing i.
>
>> On Apr 20, 2016, at 5:28 AM, Alexis ROBIN <alexis.robin at free.fr 
>> <mailto:alexis.robin at free.fr>> wrote:
>>
>> Hello,
>>
>> I looking for a solution to attenuate the volume of track 2 when the 
>> kick hit on the track 1. Is ReaComp allow it if I configure it by DB 
>> limitation ? Especially, how to proceed in this case for analyzing 
>> the kick track 1 and attenuate track 2 ?
>>
>> Thank you for your help,
>>
>> Alexis ROBIN
>> _______________________________________________
>> RWP mailing list
>> RWP at bluegrasspals.com <mailto:RWP at bluegrasspals.com>
>> http://bluegrasspals.com/mailman/listinfo/rwp
>
>
>
> _______________________________________________
> RWP mailing list
> RWP at bluegrasspals.com
> http://bluegrasspals.com/mailman/listinfo/rwp

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://bluegrasspals.com/pipermail/rwp/attachments/20160420/ed2e7073/attachment-0001.html>