[Rwp] Compressor on kick (track 1), for attenuate track 2 at each hit ?

[TheOreoMonster]

This is call side chaining and here is a helpful note that was posted to the list some time ago on how to do this.

make track 2 a four-channel track.

Send the kick to channels three and four of track 2 rather than 1 and two.

Add reacomp or your compressor capable of side-chaining of choice to track 2.

Enable its detector output, which will mean that it is scanning your auxilliary channels, i.e. 3 and 4 for the envelope to follow rather than 1 and 2.

configure compressor to taste..

All these changes, designating number of channels per track and to which channels audio should be sent, can be configured from the track routing dialogue, accessed by pressing i.
 

> On Apr 20, 2016, at 5:28 AM, Alexis ROBIN <alexis.robin at free.fr> wrote:
> 
> Hello,
> 
> I looking for a solution to attenuate the volume of track 2 when the kick hit on the track 1. Is ReaComp allow it if I configure it by DB limitation ? Especially, how to proceed in this case for analyzing the kick track 1 and attenuate track 2 ?
> 
> Thank you for your help,
> 
> Alexis ROBIN
> _______________________________________________
> RWP mailing list
> RWP at bluegrasspals.com
> http://bluegrasspals.com/mailman/listinfo/rwp

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://bluegrasspals.com/pipermail/rwp/attachments/20160420/4456d83a/attachment.html>