[Rwp] Basic question?

[Matt Turner]

yep, the mic is on the left channel, and the guitar is on the rite channel.

On 4/4/2016 6:41 PM, Justin M wrote:
> Let me get this right, you'd like to convert a stereo track to a mono 
> one? If you've already recorded the data, just select the item and do 
> a mono mix-down as desired. There are lots of different mono mix-down 
> modes for takes.
>
> Hope this helps as an alternative for selecting your inputs the ways 
> described above,
>
> Justin
>
> On 04/04/2016 22:23, David Regan wrote:
>> Well I don't know what to do then because I have never had that problem.
>> Hopefully someone on the list can help you.
>>
>> -----Original Message-----
>> From: RWP [mailto:rwp-bounces at bluegrasspals.com] On Behalf Of Matt 
>> Turner
>> Sent: Tuesday, 5 April 2016 3:39 AM
>> To: Reapers Without Peepers
>> Subject: Re: [Rwp] Basic question?
>>
>> ah, got ya.
>> That's one of the things i tried.
>> I created 2 tracks, then went into the input and chose the left channel
>> for track 1.
>> But if i try to set track 2 to the rite channel, it changes track 1 to
>> the rite channel as well
>> On 4/4/2016 3:22 PM, David Regan wrote:
>>> If you arrow to the track whose input you want to assign, and press the
>>> applications key you should end up in a menu which has several input
>>> submenus including input midi, input stereo and input mono. If you go
>> into
>>> the input mono submenu you should be able to choose your desired 
>>> input and
>>> press enter to assign it.
>>>
>>> -----Original Message-----
>>> From: RWP [mailto:rwp-bounces at bluegrasspals.com] On Behalf Of Matt 
>>> Turner
>>> Sent: Tuesday, 5 April 2016 3:12 AM
>>> To: Reapers Without Peepers
>>> Subject: Re: [Rwp] Basic question?
>>>
>>> How do you pick a input.
>>> I went into the IO and only saw audio outs.
>>>
>>> On 4/4/2016 2:40 PM, David Regan wrote:
>>>> Also, if you start by creating two tracks, and select mono input 
>>>> left for
>>>> one and mono input right for the other, you could record them both
>>>> simultaneously and you wouldn't have to split them.
>>>>
>>>> -----Original Message-----
>>>> From: RWP [mailto:rwp-bounces at bluegrasspals.com] On Behalf Of Matt 
>>>> Turner
>>>> Sent: Tuesday, 5 April 2016 1:53 AM
>>>> To: reaper
>>>> Subject: [Rwp] Basic question?
>>>>
>>>> I no I've ask this before, but its been so long sent I've done this.
>>>> My Roland TRI capture records the mic input, and guitar input on the
>>>> left and rite channel in a stereo track.
>>>> Now what I'd like to do is, to take the left, and rite channels of 
>>>> that
>>>> track, and split it in to mono.
>>>> Is there any way of doing this?
>>>> _______________________________________________
>>>> RWP mailing list
>>>> RWP at bluegrasspals.com
>>>> http://bluegrasspals.com/mailman/listinfo/rwp
>>>>
>>>> _______________________________________________
>>>> RWP mailing list
>>>> RWP at bluegrasspals.com
>>>> http://bluegrasspals.com/mailman/listinfo/rwp
>>> _______________________________________________
>>> RWP mailing list
>>> RWP at bluegrasspals.com
>>> http://bluegrasspals.com/mailman/listinfo/rwp
>>>
>>> _______________________________________________
>>> RWP mailing list
>>> RWP at bluegrasspals.com
>>> http://bluegrasspals.com/mailman/listinfo/rwp
>> _______________________________________________
>> RWP mailing list
>> RWP at bluegrasspals.com
>> http://bluegrasspals.com/mailman/listinfo/rwp
>>
>> _______________________________________________
>> RWP mailing list
>> RWP at bluegrasspals.com
>> http://bluegrasspals.com/mailman/listinfo/rwp
>
> _______________________________________________
> RWP mailing list
> RWP at bluegrasspals.com
> http://bluegrasspals.com/mailman/listinfo/rwp