[Rwp] Plug-in pin connector

[Justin Macleod]

Hi, 

 

You don't need to set it that way when using reacomp because you can enable
the audio detector in the parameter list, which will automatically change it
to 4 in 2 out,

 

Justin 

 

From: RWP [mailto:rwp-bounces at bluegrasspals.com] On Behalf Of Roger
Alexanderson via RWP
Sent: 04 September 2015 18:32
To: Reapers Without Peepers <rwp at bluegrasspals.com>
Cc: Roger Alexanderson <roger77swe at yahoo.com>
Subject: Re: [Rwp] Plug-in pin connector

 

you're not alone there mate, i have exactly the same thing just now when i
tried to set the reacomp.



Den 2015-09-04 kl. 19:15, skrev Justin Macleod via RWP:

Hi all, 

Since side-chaining has come up, I'm using MDA's vocoder. I have track 1 set
to send to channels 3 and 4 of track 2, i.e. I want track 1 to modulate
track 2. When I look at the effects dialogue however, it says 2 in 2 out.
When I press the button to chain it, it brings up the plug-in pin connector
dialogue, which appears completely inaccessible in that no amount of tabbing
or object naving yields any feedback. 

 

I tried using rea vocoder but, although that says 4 in 2 out, no audio comes
across track 2 whatsoever. 

 

What am I doing wrong? 

 

Thanks for any help, 

 

Justin 






_______________________________________________
RWP mailing list
RWP at bluegrasspals.com <mailto:RWP at bluegrasspals.com> 
http://bluegrasspals.com/mailman/listinfo/rwp

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://bluegrasspals.com/pipermail/rwp/attachments/20150904/a67a111a/attachment-0001.html>