[Rwp] sidechaining.

[Roger Alexanderson]

thanks, i think i will get the hang of it eventually:)
but what bothers me is when i'm in the i/o it sometimes jumps back to 
the "insert from all tracks"


Den 2015-09-03 kl. 20:32, skrev Justin Macleod via RWP:
> That means that channels 1 and 2 of your send are sending to channels 3 and
> 4 of your receive, where your compressor/gate/vocoder/whatever will be
> listening for the audio to turn up.
>
> Hope this helps,
>
> Justin
>
> -----Original Message-----
> From: RWP [mailto:rwp-bounces at bluegrasspals.com] On Behalf Of Roger
> Alexanderson via RWP
> Sent: 03 September 2015 19:20
> To: Reapers Without Peepers <rwp at bluegrasspals.com>
> Cc: Roger Alexanderson <roger77swe at yahoo.com>
> Subject: Re: [Rwp] sidechaining.
>
> just a bit confused, 1+2=3+4?
>
> Den 2015-09-03 kl. 17:22, skrev Alex H. via RWP:
>> You have it correct.
>>
>> alex
>>
>> On 9/1/15, theoreomonster--- via RWP <rwp at bluegrasspals.com> wrote:
>>> just to clarify if i wanted the bass to duct overtime the kick hits,
>>> i would make the bass track a 4 channel track and put the compressor
>>> on that one and set the input to 3/4, then set the kick drum track to
>>> 1/2>=3/4? Or is it the other way around ?
>>>> On Sep 1, 2015, at 10:15 PM, Alex H. via RWP <rwp at bluegrasspals.com>
>>>> wrote:
>>>>
>>>> hi,
>>>>
>>>> Make your receiving track (the one with the effect u wanna use as a
>>>> side chaining thing) a 4 channel track.
>>>> On the effects on that track, Set the input on the plugin to
>>>> channels 3/4. It's sometimes called auxiliary.
>>>>
>>>> Go to the other track, the one with the audio you wish to manipulate
>>>> and bring up the track routing dialog. It's I with reaaccess; not
>>>> sure with OSARA.
>>>> Find the buttons that say audio 1/2 and >=1/2. Press on the >= one
>>>> and select 3/4. Done.
>>>>
>>>> Hope this helps, jotting down from memory as I don't have any access
>>>> to Reaper to double check. Someone else will chime in who knows
>>>> their stuff I'm sure :)
>>>>
>>>> alex
>>>>
>>>> On 8/31/15, Roger Alexanderson via RWP <rwp at bluegrasspals.com> wrote:
>>>>> hi.
>>>>> I'm trying to get sidechain compression to work but it's a bit of a
>>>>> hazard.
>>>>> i followed instruction on the cockos forums.
>>>>> http://forum.cockos.com/showthread.php?t=17729
>>>>> the first problem i found was it's a bit tricky to get the in and
>>>>> outs right in the i/o routing dialogue.
>>>>> secondly the plugin pin connector doesn't seem to be accessible at
>>>>> all, at least not in reacomp.
>>>>> any ideas.
>>>>> thanks
>>>>> _______________________________________________
>>>>> RWP mailing list
>>>>> RWP at bluegrasspals.com
>>>>> http://bluegrasspals.com/mailman/listinfo/rwp
>>>>>
>>>> _______________________________________________
>>>> RWP mailing list
>>>> RWP at bluegrasspals.com
>>>> http://bluegrasspals.com/mailman/listinfo/rwp
>>> _______________________________________________
>>> RWP mailing list
>>> RWP at bluegrasspals.com
>>> http://bluegrasspals.com/mailman/listinfo/rwp
>>>
>> _______________________________________________
>> RWP mailing list
>> RWP at bluegrasspals.com
>> http://bluegrasspals.com/mailman/listinfo/rwp
>>
> _______________________________________________
> RWP mailing list
> RWP at bluegrasspals.com
> http://bluegrasspals.com/mailman/listinfo/rwp
> _______________________________________________
> RWP mailing list
> RWP at bluegrasspals.com
> http://bluegrasspals.com/mailman/listinfo/rwp
>