[Rwp] Automation: found out how touch works I think

[theoreomonster at reaperaccess.com]

The Reaper manual has description on what all the different automation modes mean along with examples. 


> On Jun 9, 2015, at 1:15 AM, Justin Macleod via RWP <rwp at bluegrasspals.com> wrote:
> 
> Hi, 
> 
> For all those, like me, getting annoyed because previously created
> automation envelopes were getting messed up by succeeding ones, if you set
> the automation mode to touch, instead of write, I believe it only pays
> attention to your last touched parameter and therefore won't have the volume
> and pan envelopes armed. 
> 
> This worked for me. I had applied a volume envelope to a track and tried to
> introduce an effect half way through via automation using the write mode,
> which failed. The effect was introduced but the track volume went screwy. 
> 
> When I used touch, it worked fine. 
> 
> Now I just need to work out what flash does, 
> 
> Justin 
> 
> -----Original Message-----
> From: RWP [mailto:rwp-bounces at bluegrasspals.com] On Behalf Of Chris Belle
> via RWP
> Sent: 08 June 2015 22:32
> To: Reapers Without Peepers
> Cc: Chris Belle
> Subject: Re: [Rwp] Automation
> 
> I don't know why they did it that way, just doesn't make sense to me.
> 
> 
> 
> On 6/8/2015 12:23 PM, Jim Snowbarger via RWP wrote:
>> And try not to want to muck with automation at an earlier point in the 
>> project than some previouslly constructed automation on that same track.
>> Otherwise, you will wipe out, or generally screw up, that later event.
>> 
>> 
>> -----Original Message-----
>> From: RWP [mailto:rwp-bounces at bluegrasspals.com] On Behalf Of James 
>> Teh via RWP
>> Sent: Monday, June 08, 2015 11:27 AM
>> To: Reapers Without Peepers
>> Cc: James Teh
>> Subject: Re: [Rwp] Automation
>> 
>> On 8/06/2015 2:33 AM, Chris Belle via RWP wrote:
>>> That reaper default behavior of not staying put when you write 
>>> automation but snapping back to the original drives me nuts.
>> Try the action Automation: Write current values from cursor to end of 
>> project.
>> 
>> Jamie
>> 
>> --
>> James Teh
>> Executive Director, NV Access Limited
>> Ph +61 7 3149 3306
>> www.nvaccess.org
>> Facebook: http://www.facebook.com/NVAccess
>> Twitter: @NVAccess
>> SIP: jamie at nvaccess.org
>> _______________________________________________
>> RWP mailing list
>> RWP at bluegrasspals.com
>> http://bluegrasspals.com/mailman/listinfo/rwp
>> 
>> 
>> 
>> _______________________________________________
>> RWP mailing list
>> RWP at bluegrasspals.com
>> http://bluegrasspals.com/mailman/listinfo/rwp
>> 
> 
> _______________________________________________
> RWP mailing list
> RWP at bluegrasspals.com
> http://bluegrasspals.com/mailman/listinfo/rwp
> _______________________________________________
> RWP mailing list
> RWP at bluegrasspals.com
> http://bluegrasspals.com/mailman/listinfo/rwp