[RWP] Nudge all selected items

[adriandavids404 at gmail.com]

Thank you Scott,

This is very useful information, it will certainly make life much easier.

Adrian
Sent via my BlackBerry from Vodacom - let your email find you!

-----Original Message-----
From: Scott Chesworth <scottchesworth at gmail.com>
Sender: "RWP" <rwp-bounces at reaaccess.com>
Date: Sat, 3 Jan 2015 23:42:02 
To: Reapers Without Peepers<rwp at reaaccess.com>
Reply-To: Reapers Without Peepers <rwp at reaaccess.com>
Subject: Re: [RWP] Nudge all selected items

In the interest of cutting down the amount of button bashing, if you
wanted to select all items on a track you could do that without lots
of Ctrl+Shift+arrowing. Shift+A will select the item under the cursor.
If you follow that up with a Ctrl+A, it'll select all of the items on
the track and speak how many are selected. Note that the keystrokes
have to come directly after one another for this to work.

Hth someone at some point

Scott


On 1/3/15, Jim Snowbarger <snowman at snowmanradio.com> wrote:
> It sounds like the original problem might be that not all items are
> selected.
> How does one do that?
> Control+left and right arrow just select the item that the cursor lands on.
> And, if you press it again, selection leaves that item, and moves to the
> next item.
> To select a group of items, is it shift+control+arrow key?
> One of the bad things about our current interface is the inability to
> confirm exactly what items / tracks are selected.
>
>
> -----Original Message-----
> From: RWP [mailto:rwp-bounces at reaaccess.com] On Behalf Of David P Shortland
> Sent: Saturday, January 03, 2015 1:44 PM
> To: Reapers Without Peepers
> Subject: Re: [RWP] Nudge all selected items
>
> Hi & Happy New Year to all from The Great Southern Land,
>
> Try this...
>
> Select all your Items on the desired Trak Press Shift plus F2, this brings
> up the Item Properties Dialog Type in a new value into the Position
> parameter
>
> All your Items should be shifted by the amount of difference there was
> between your initial position and your new position value.
>
> Safe Prosperous & Happy New Year
>
> David P Shortland
> DragonScore Productions
>
>
> -----Original Message-----
> From: ROBIN Alexis
> Sent: Saturday, January 03, 2015 8:18 PM
> To: Reapers Without Peepers
> Subject: [RWP] Nudge all selected items
>
> Hello all,
>
> In order to place better my tempo on the metronome, I would like nudge all
> items on track, each item representing one measure. To do that i tried:
>
> 1. Selecting all items in desired track
> 2. Pressing N for nudge parameters and clicking on nudge right.
> Problem, only the first item is nudged.
> I also tried to put all items in a group, selecting the first item of this
> group and nudging this item, without more good result.
>
> Thank you for your propositions,
>
> Again, happy new year
>
> P.S.: if anyone have a solution to quantize tempo on audio track, I'm still
> looking for the process,
>
> Alexis ROBIN
>
>
>
> _______________________________________________
> RWP mailing list
> RWP at reaaccess.com
> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>
>
> _______________________________________________
> RWP mailing list
> RWP at reaaccess.com
> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>
>
>
>
> _______________________________________________
> RWP mailing list
> RWP at reaaccess.com
> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>

_______________________________________________
RWP mailing list
RWP at reaaccess.com
http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com