[Rwp] Reaper and Tranzport problems.

[Scott Chesworth]

Damn, I don't have JAWS installed here to figure it out. So far as I
remember it was the scroll symbol just after the label for each port I
had to click to get to the choices. Once that's done, it's a standard
combobox for each port.

Hth

Scott

On 2/13/15, Jim Noseworthy via RWP <rwp at bluegrasspals.com> wrote:
> Hey Scott:
>
> I see the MIDI in & out options but I am unable to open those options using
> the JAWS cursor to left or right click.
>
> Cheers.
>
>
> -----Original Message-----
> From: RWP [mailto:rwp-bounces at bluegrasspals.com] On Behalf Of Scott
> Chesworth via RWP
> Sent: Friday, February 13, 2015 8:57 AM
> To: Reapers Without Peepers
> Subject: Re: [Rwp] Reaper and Tranzport problems.
>
> Aha, think I see the problem. Potentially two of them actually.
>
> Under Preferences / Control Surfaces, after you hit the add button and
> choose Tranzport from the combobox, there are options to set the MIDI in
> and
> out ports. It's not immediately obvious that those options are there
> waiting
> to be set, because they're not in the tab order of the window for some
> reason. You'll need to use the virtual cursor or object navigation of
> whatever screen reader you use to locate those two additional options and
> set the MIDI I/O before pressing ok.
>
> Once you've done that, if it still doesn't work, try disabling the
> Tranzport
> ports under Preferences/ MIDI Devices. I have no idea why, but on this
> system that's how the thing has been set for ages, and it works.
>
> Hth
>
> Scott
>
> On 2/13/15, Jim Noseworthy via RWP <rwp at bluegrasspals.com> wrote:
>> Hello:
>>
>> Here are the steps that i have taken:
>>
>> 1:  in the Reaper preferences/MIDI devices options, I configured the
>> input to "Tranzport enabled + Control. I configured the MIDI output
>> option to "Tranzport Enabled."
>>
>> 2: in the "Control Surfaces" option, I added the Tranzport. The
>> "Control Surface" list now reports the following:
>> Frontier Tranzport (Dev -1,-1.)
>>
>> Am I doing something wrong here?
>>
>> I've attempted the installation on two computers but with the same
>> result.
>>
>> Thanks all over the place.
>>
>> -----Original Message-----
>> From: RWP [mailto:rwp-bounces at bluegrasspals.com] On Behalf Of Scott
>> Chesworth via RWP
>> Sent: Friday, February 13, 2015 8:06 AM
>> To: Reapers Without Peepers
>> Subject: Re: [Rwp] Reaper and Tranzport problems.
>>
>> Hmmm, I've got one working here, but tbh it's been so long since I set
>> it up that the steps don't spring to mind. Perhaps run us through what
>> you've done so far and it might disturb the dust.
>>
>> On 2/13/15, Jim Noseworthy via RWP <rwp at bluegrasspals.com> wrote:
>>> Hi Gang:
>>>
>>> I am unable to get Reaper to respond to the Tranzport though, as far
>>> as I know, I have it configured in Reaper correctly.
>>>
>>> Any help would be appreciated all over the place.
>>>
>>>
>>> _______________________________________________
>>> RWP mailing list
>>> RWP at bluegrasspals.com
>>> http://bluegrasspals.com/mailman/listinfo/rwp
>>>
>> _______________________________________________
>> RWP mailing list
>> RWP at bluegrasspals.com
>> http://bluegrasspals.com/mailman/listinfo/rwp
>>
>> _______________________________________________
>> RWP mailing list
>> RWP at bluegrasspals.com
>> http://bluegrasspals.com/mailman/listinfo/rwp
>>
> _______________________________________________
> RWP mailing list
> RWP at bluegrasspals.com
> http://bluegrasspals.com/mailman/listinfo/rwp
>
> _______________________________________________
> RWP mailing list
> RWP at bluegrasspals.com
> http://bluegrasspals.com/mailman/listinfo/rwp
>