[Rwp] Can I read input meters?

[Scott Chesworth]

Hi Chris,

With ReaAccess, J reads the left channel of the meter and K reads the
right channel. Adding Shift to that will do the same for the master
track.

Hth

Scott

On 4/1/15, Christopher-Mark Gilland via RWP <rwp at bluegrasspals.com> wrote:
> I have a quick question.
>
> I am primarily a ProTools guy on the mac, however I am extraordinarily
> interested in learning more about Reaper in combination with Reaccess.  So
> far, the things I've learned have proven to be so ridiculously logical, and
> easy for me to understand that I must say, I'm quite shocked!
>
> Anyway, on to my question...  In ProTools, one of the things that makes my
> recording workflow work as well as it does is the fact that I can read my
> input meters.  As you probably know, you never want to record a track by
> coming in to start at a really hot signal level.  If you do, you stand an
> extremely likely chance of clipping.  I normally record vocals for example,
> around -12DB.  My question is, is there a way with JAWS 15, or 16, I have
> access to both, that with Reaccess installed, I can get at those meters and
> read them on a track per track basis?  I assume you can, but this would be a
> major! major! dealbreaker for me, most likely, if not.
>
> Chris.
> ---
> Check out my web site at:
> http://www.clgproductions.net