[RWP] automation and surround sound question

[Ken Downey]

I was actually able to do it with ring mod right from within the plug-in, 
but the adjustments were pretty coarse tune. Again, the mouse could be 
really useful here.
----- Original Message ----- 
From: "Patrick Perdue" <patrick at pdaudio.net>
To: "Reapers Without Peepers" <rwp at reaaccess.com>
Sent: Monday, October 20, 2014 6:27 PM
Subject: Re: [RWP] automation and surround sound question


> Agreed. I've sometimes slowed down the master play rate and done 
> automation at stupid speeds, then play back at normal speed to compensate. 
> Just be careful that play rate change isn't automated as well, or bad 
> things happen... that is, unless you want that effect. That can be fun 
> under the right context.
>
> Of course, none of this addresses anything regarding automating effect 
> parameters over time within a project. I really don't know of a good way 
> to do that without a control surface.
>
>
> On 10/20/2014 6:34 PM, Jim Snowbarger wrote:
>> One thing I think we started poking into, but got sideTracked, was
>> writing ReaScript python modules to make larger jumps in pan and volume
>> in response to a single key stroke.
>> I'm still  not convinced that that can't be accomplished if any of us
>> had the time to focus on it.  A set of hot keys that would move in 1DB
>> increments would be a lok more usable for automation.  But, as of now,
>> it's not a reality.
>>
>>
>>
>> ----- Original Message ----- From: "Scott Chesworth"
>> <scottchesworth at gmail.com>
>> To: "Reapers Without Peepers" <rwp at reaaccess.com>
>> Sent: Monday, October 20, 2014 12:39 PM
>> Subject: Re: [RWP] automation and surround sound question
>>
>>
>>> Questions about automation come up around these parts quite often, and
>>> the unfortunate answer is that it's currently a bit of a mess with
>>> ReaAccess, and so far as I know nobody has figured out a consistent
>>> workflow for it yet. A better approach to automation was on the
>>> features list for ReaAccess 2.0, which was supposedly developed but
>>> has never seen the light of day. For now, what most people are doing
>>> is getting by with item-based effects. It's not as cool as full
>>> automation, but it works for some situations.
>>>
>>> Sorry to be the barer of bad news
>>>
>>> Scott
>>>
>>> On 10/20/14, Ken Downey <KenWDowney at blindlabyrinth.com> wrote:
>>>> I have, sort of, come to understand how the automation works. I know
>>>> how to
>>>> get the envelopes visible, though I'm not sure what arms them, and
>>>> setting
>>>> automation to write and so on is no problem. I know that I can also
>>>> use alt
>>>> upand down arrows to automate volume, alt right and left for pan. I'm
>>>> wondering if there is a better way to automate these, as the changes 
>>>> are
>>>> quite gradual. I'm also wondering how to automate effects. For
>>>> example, we
>>>> can take a piece and put it through a ring modulator, but the exciting
>>>> aspect of automation is that we can ride the ring mod frequency up
>>>> and down
>>>> through the entire piece, changing it as we go, and having that sound
>>>> always
>>>> be the same after that. Am I wrong, or is this doable?
>>>> Ken Downey
>>>> For a fresh perspective of Christianity, visit my blog at
>>>> longing4god.wordpress.com,
>>>> and my podcast network at
>>>> www.audioboom.fm/channel/honest2god .
>>>> For experimental electroacoustic music that is out of this world, visit
>>>> www.BlindLabyrinth.com .
>>>> Feel free to add me as a friend on Skype and Facebook. My user name is
>>>> always the same, KenWDowney.
>>>
>>> _______________________________________________
>>> RWP mailing list
>>> RWP at reaaccess.com
>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>
>>
>>
>>
>> _______________________________________________
>> RWP mailing list
>> RWP at reaaccess.com
>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>
>
> _______________________________________________
> RWP mailing list
> RWP at reaaccess.com
> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com