[RWP] kareem paul
kareem paul
kareem.paul at hotmail.com
Tue Nov 4 08:02:21 EST 2014
hey thanks I was able to enable it
-----Original Message-----
From: Amir Ramezani
Sent: Sunday, November 02, 2014 11:14 PM
To: Reapers Without Peepers
Subject: Re: [RWP] kareem paul
no, it doesnt have, or i dont know
but in prefferences dialog, in midi devices, you can enable it by
using root jaws to PC and right click on your midi device and select
enable
۱۳۹۳-۰۸-۱۲ ۲:۱۱ GMT+۰۳:۳۰, kareem paul <kareem.paul at hotmail.com>:
>
> hey I tried doing that and I am still not getting to enable it does
> reaaccess have some special key stroke to enable a midi device?
>
> -----Original Message-----
> From: Amir Ramezani
> Sent: Sunday, November 02, 2014 12:40 PM
> To: Reapers Without Peepers
> Subject: Re: [RWP] kareem paul
>
> right click on your midi controler, and select enable in the prefferences
> dialog
>
> ۱۳۹۳-۰۸-۱۱ ۱۹:۰۴ GMT+۰۳:۳۰, kareem paul <kareem.paul at hotmail.com>:
>>
>> hey everyone I have now installed reaper and I would like to know
>> how to enable my midi controller I am just seeing that it is disabled but
>> I
>>
>> not seeing a option to enable it... thanks in advance
>>
>> -----Original Message-----
>> From: Alex H.
>> Sent: Saturday, November 01, 2014 3:38 PM
>> To: Reapers Without Peepers
>> Subject: Re: [RWP] How to clean up guitar amp sim noises?
>>
>> Not being gauche, but Google's a good place to start. Generally the
>> first result or so is a homepage for a plugin name you type in.
>>
>> Recabinet is at recabi.net and TSE audio is at tseaudio.com for a start,
>> though.
>>
>> Alex
>>
>> On 11/1/14, Keith Hinton <keithint1234 at gmail.com> wrote:
>>> I'm a bit late to this thread, but you guys have mentioned a lot of
>>> great Reaper FX here. I wonder where you get some of these from?
>>> Thanks.
>>>
>>> On 11/1/14, Hadi Rezaee <hadirezaei at gmx.com> wrote:
>>>> Hi Alex!
>>>> Thanks a lot for these!
>>>> I'll check them out and reply
>>>>
>>>> On 10/31/2014 8:35 PM, Alex H. wrote:
>>>>> Here are my recab presets
>>>>> https://dl.dropboxusercontent.com/u/4425568/recab.rpl?dl
>>>>>
>>>>> I'll write over the weekend and ask if anything's changed access wise
>>>>> in version 4 too.
>>>>>
>>>>> peace,
>>>>> Alex
>>>>>
>>>>> On 10/31/14, Hadi Rezaee <hadirezaei at gmx.com> wrote:
>>>>>> Thanks Alex!
>>>>>> Do you attach them via the mail?
>>>>>>
>>>>>>
>>>>>> On 10/31/2014 6:28 AM, Scott Chesworth wrote:
>>>>>>> Dude, contact him again and ask if anything got looked at and what's
>>>>>>> likely to change in version 4? It's about the least hassling-looking
>>>>>>> way of hassling someone isn't it :P
>>>>>>>
>>>>>>> On 10/31/14, Alex H. <linuxx64.bashsh at gmail.com> wrote:
>>>>>>>> Hi Hadi, Scott,
>>>>>>>>
>>>>>>>> First, Hadi, if you can see you can load wav files in recabinet. No
>>>>>>>> way to do it using hacky things called screen readers, I'm afraid.
>>>>>>>> :(
>>>>>>>> The initial idea was you could blend external IRs and the builtin
>>>>>>>> Recab ones, and make a huge tone. I don't wanna get into making
>>>>>>>> foldres for each guit track and blending IR outputs right now, but
>>>>>>>> it
>>>>>>>> could be done using multiple plugs.
>>>>>>>>
>>>>>>>> I've not tried Recabinet 4 yet, I'm kinda waiting for a demo
>>>>>>>> version
>>>>>>>> to come out to see if access has improved or worsened, but it's
>>>>>>>> frustratingly still not up for grabs on the site. I might just go
>>>>>>>> buy
>>>>>>>> it anyway but I'll be bummed if it's worse than 3.
>>>>>>>>
>>>>>>>> I'll post the reaper presets.ini file of my recab presets (not
>>>>>>>> gonna
>>>>>>>> export 30 fxps...).
>>>>>>>>
>>>>>>>> Scott, it's really the luck of the draw. You might try forcing
>>>>>>>> reaper
>>>>>>>> to load each plug in its own process so it's able to be alt-tabbed
>>>>>>>> to,
>>>>>>>> and then scan the window. More often than not I get the same thing
>>>>>>>> you
>>>>>>>> do, though. It takes anywhere from half an hour to an hour to make
>>>>>>>> 1
>>>>>>>> preset.Yay staying up all night on weekends! :D
>>>>>>>>
>>>>>>>> I did contact Shane at Kazrog to see what he could do, only thing I
>>>>>>>> got was "we'll look into it," which while boring and generic, was
>>>>>>>> at
>>>>>>>> least better than NI/IK Multimedia's non-response.
>>>>>>>>
>>>>>>>> Peace,
>>>>>>>> Alex
>>>>>>>>
>>>>>>>> On 10/30/14, Scott Chesworth <scottchesworth at gmail.com> wrote:
>>>>>>>>> Probably a mute question Alex, but have you been in touch with the
>>>>>>>>> developer of ReCabinet to explain how useful them sorting out the
>>>>>>>>> automation parameters would be?
>>>>>>>>>
>>>>>>>>> Also, how do you get anything useful out of OCR with NVDA? I mean,
>>>>>>>>> sometimes I get results from it (it seems to do a good job of iLok
>>>>>>>>> related errors), but I'm guessing it's not replicating the screen
>>>>>>>>> layout, because whenever I've moused over the text it's picked up
>>>>>>>>> from
>>>>>>>>> a button and clicked it's had no affect. What am I missing?
>>>>>>>>>
>>>>>>>>> Scott
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On 10/30/14, Alex H. <linuxx64.bashsh at gmail.com> wrote:
>>>>>>>>>> I use NVDA with Recabinet. The interface is a bear for two
>>>>>>>>>> reasons,
>>>>>>>>>> though:
>>>>>>>>>> 1. Shift-P dialog doesn't have any effect on any parameter,
>>>>>>>>>> except
>>>>>>>>>> dynamics and some EQ params, but you cannot change cabinets.
>>>>>>>>>> Useful...not.
>>>>>>>>>> I worked around this with the hotspotNkockoff thing Jim posted
>>>>>>>>>> way
>>>>>>>>>> back, and before that I used the OCR addon for NVDA and scanned
>>>>>>>>>> the
>>>>>>>>>> plug interface.
>>>>>>>>>> I made a bunch of presets of stuff I thought sounded cool; you
>>>>>>>>>> may
>>>>>>>>>> have those if you want them.
>>>>>>>>>>
>>>>>>>>>> In short, then, recabinet is an access nightmare without presets.
>>>>>>>>>> Who
>>>>>>>>>> wants to take 20 minutes to figure out how to change a cabinet?
>>>>>>>>>> LOL
>>>>>>>>>> :)
>>>>>>>>>> With presets and/or patience, though, it's quite a nice bit of
>>>>>>>>>> kit.
>>>>>>>>>>
>>>>>>>>>> Hope this helps.
>>>>>>>>>> Alex
>>>>>>>>>>
>>>>>>>>>> On 10/30/14, Hadi Rezaee <hadirezaei at gmx.com> wrote:
>>>>>>>>>>> Hello Alex
>>>>>>>>>>>
>>>>>>>>>>> Thanks for your great tips,
>>>>>>>>>>> I currently do not own any real amps or cabinets, I'm waiting to
>>>>>>>>>>> get
>>>>>>>>>>> more bucks so maybe i could go for a nice set of rig, but it's
>>>>>>>>>>> a
>>>>>>>>>>> long
>>>>>>>>>>> way to go. till then, I'm trying to get as much as quality as i
>>>>>>>>>>> can
>>>>>>>>>>> get
>>>>>>>>>>> from amp simulations, because both for playing live/recording
>>>>>>>>>>> I
>>>>>>>>>>> should
>>>>>>>>>>> use them.
>>>>>>>>>>> I might buy recabinet, but how's the accessibility on this
>>>>>>>>>>> software?
>>>>>>>>>>> Do you use jaws or NVDA to work with it? Does it require
>>>>>>>>>>> scripts?
>>>>>>>>>>> I have listened to some songs using recabinet in youtube, and
>>>>>>>>>>> they
>>>>>>>>>>> sound
>>>>>>>>>>> so awesome, even with lepou lecto!
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On 10/30/2014 6:12 PM, Alex H. wrote:
>>>>>>>>>>>> Hi Hadi,
>>>>>>>>>>>>
>>>>>>>>>>>> I'm a bit late on this, but for reaVerb, set wet level to 0,
>>>>>>>>>>>> dry
>>>>>>>>>>>> to
>>>>>>>>>>>> infinite as Scott said.
>>>>>>>>>>>>
>>>>>>>>>>>> The reaEq is really quite good, and once you get comfortable
>>>>>>>>>>>> with
>>>>>>>>>>>> tweaking and find a good sound, you could add reaComp or
>>>>>>>>>>>> reaXComp
>>>>>>>>>>>> at
>>>>>>>>>>>> the end of the chain (after reaVerb with a cab IR loaded). You
>>>>>>>>>>>> don't
>>>>>>>>>>>> need to worry about this really, but it could help make a phat
>>>>>>>>>>>> sound
>>>>>>>>>>>> even more beafy.
>>>>>>>>>>>>
>>>>>>>>>>>> If you're interested in using other cab sims, there's
>>>>>>>>>>>> affordable
>>>>>>>>>>>> Recabinet, Mercuriall Cab (which is free), and if you wanna
>>>>>>>>>>>> dish
>>>>>>>>>>>> out
>>>>>>>>>>>> some bucks, Waves has a nice set of guitar plugs, which to some
>>>>>>>>>>>> degree
>>>>>>>>>>>> or other are accessible enough using the shift-P dialog. One
>>>>>>>>>>>> reason
>>>>>>>>>>>> you'd want to get another cab sim is if you play live through
>>>>>>>>>>>> your
>>>>>>>>>>>> track when recording, or just jamming out. The reaVerb latency
>>>>>>>>>>>> irritates me. You can set the Max FFT size to 32 for now if
>>>>>>>>>>>> that's
>>>>>>>>>>>> an
>>>>>>>>>>>> issue as well.
>>>>>>>>>>>>
>>>>>>>>>>>> Best of luck,
>>>>>>>>>>>> Alex
>>>>>>>>>>>>
>>>>>>>>>>>> On 10/29/14, Hadi Rezaee <hadirezaei at gmx.com> wrote:
>>>>>>>>>>>>> Hi scott
>>>>>>>>>>>>> Thanks for your great advise.
>>>>>>>>>>>>> So, first step, drop that gain down on the audio interface.
>>>>>>>>>>>>> Now, I need to play with the plugins to boost that amp
>>>>>>>>>>>>> sound,
>>>>>>>>>>>>> but
>>>>>>>>>>>>> I
>>>>>>>>>>>>> have a problem.
>>>>>>>>>>>>> Is there a way to move the VST plugins up and down in a chain
>>>>>>>>>>>>> easily
>>>>>>>>>>>>> in
>>>>>>>>>>>>> the fx window? because i don't know how to do that, and i end
>>>>>>>>>>>>> up
>>>>>>>>>>>>> deleting everything in the chain, and re-adding the plugins.
>>>>>>>>>>>>> Secondly, Is ReaVerb the only option that we have for cabinet
>>>>>>>>>>>>> simulation?
>>>>>>>>>>>>> If so, do you have any ideas that how much wet should i set
>>>>>>>>>>>>> for
>>>>>>>>>>>>> reaVerb?
>>>>>>>>>>>>> is 0 a good number? 0.0 that is.
>>>>>>>>>>>>> third, Do you know of a good EQ plugin that you would use
>>>>>>>>>>>>> dayly?
>>>>>>>>>>>>> Thanks scott
>>>>>>>>>>>>>
>>>>>>>>>>>>> On 10/29/2014 1:54 AM, Scott Chesworth wrote:
>>>>>>>>>>>>>> Hi dude,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Yup, definitely back off the gain then! The next stage is
>>>>>>>>>>>>>> probably
>>>>>>>>>>>>>> for
>>>>>>>>>>>>>> you to spend time figuring out how your plugins respond, so
>>>>>>>>>>>>>> start
>>>>>>>>>>>>>> with
>>>>>>>>>>>>>> the amp set flat and tinker with each control to figure out
>>>>>>>>>>>>>> what
>>>>>>>>>>>>>> that
>>>>>>>>>>>>>> adds or subtracts sound-wise. When I'm getting to know a new
>>>>>>>>>>>>>> plugin,
>>>>>>>>>>>>>> I
>>>>>>>>>>>>>> try to split my time fairly evenly between playing whilst
>>>>>>>>>>>>>> tweaking
>>>>>>>>>>>>>> controls, as well as pre-recording a few riffs I know I'll
>>>>>>>>>>>>>> play
>>>>>>>>>>>>>> well
>>>>>>>>>>>>>> and just concentrating on the amp controls with those riffs
>>>>>>>>>>>>>> on
>>>>>>>>>>>>>> a
>>>>>>>>>>>>>> loop.
>>>>>>>>>>>>>> Reason being that this way, you're still spending some time
>>>>>>>>>>>>>> with
>>>>>>>>>>>>>> the
>>>>>>>>>>>>>> plugin as a guitar player, and your brain will get a chance
>>>>>>>>>>>>>> to
>>>>>>>>>>>>>> pick
>>>>>>>>>>>>>> up
>>>>>>>>>>>>>> on what feels different as a player when you make
>>>>>>>>>>>>>> adjustments,
>>>>>>>>>>>>>> as
>>>>>>>>>>>>>> well
>>>>>>>>>>>>>> as learning what your new plugin can do clinically. If you're
>>>>>>>>>>>>>> going
>>>>>>>>>>>>>> to
>>>>>>>>>>>>>> be recording yourself, both of those mindsets will come in
>>>>>>>>>>>>>> useful
>>>>>>>>>>>>>> at
>>>>>>>>>>>>>> different stages of the recording. If you can get at the
>>>>>>>>>>>>>> presets
>>>>>>>>>>>>>> of
>>>>>>>>>>>>>> whatever plugin you're using, find some that you like and go
>>>>>>>>>>>>>> check
>>>>>>>>>>>>>> out
>>>>>>>>>>>>>> the controls with that preset loaded to see how it's being
>>>>>>>>>>>>>> used.
>>>>>>>>>>>>>> Do
>>>>>>>>>>>>>> the same for presets that you really don't like too, because
>>>>>>>>>>>>>> it'll
>>>>>>>>>>>>>> probably save you some time further down the line. When
>>>>>>>>>>>>>> you're
>>>>>>>>>>>>>> happy
>>>>>>>>>>>>>> that you've found a plugin that you're able to dial up
>>>>>>>>>>>>>> something
>>>>>>>>>>>>>> consistent, throw in that Tubescreamer before the amp and run
>>>>>>>>>>>>>> the
>>>>>>>>>>>>>> same
>>>>>>>>>>>>>> experiment to find out what difference that makes. I know
>>>>>>>>>>>>>> there's
>>>>>>>>>>>>>> only
>>>>>>>>>>>>>> 2 or 3 controls on a Tubescreamer, but they're very
>>>>>>>>>>>>>> interactive
>>>>>>>>>>>>>> placed
>>>>>>>>>>>>>> in front of a heavily driven amp, and not all plugs respond
>>>>>>>>>>>>>> well
>>>>>>>>>>>>>> to
>>>>>>>>>>>>>> them. After that, read up on EQ, watch some tutorials etc,
>>>>>>>>>>>>>> and
>>>>>>>>>>>>>> see
>>>>>>>>>>>>>> whether you can learn to identify the frequencies that rock
>>>>>>>>>>>>>> your
>>>>>>>>>>>>>> world
>>>>>>>>>>>>>> as well as the ones that could be cut out of your guitar
>>>>>>>>>>>>>> sound
>>>>>>>>>>>>>> so
>>>>>>>>>>>>>> that
>>>>>>>>>>>>>> there's more chance the good stuff will get heard. Most of
>>>>>>>>>>>>>> the
>>>>>>>>>>>>>> fat
>>>>>>>>>>>>>> sound you're looking for will likely come from double or quad
>>>>>>>>>>>>>> tracking
>>>>>>>>>>>>>> your guitar parts, but if you can double or quad track a
>>>>>>>>>>>>>> guitar
>>>>>>>>>>>>>> sound
>>>>>>>>>>>>>> that's great to start with instead of double or quad tracking
>>>>>>>>>>>>>> everything to disguise a pants guitar tone, then you're doing
>>>>>>>>>>>>>> better
>>>>>>>>>>>>>> than most people already. Keep in mind at all times that even
>>>>>>>>>>>>>> for
>>>>>>>>>>>>>> people who do this stuff for a living, it's a tall order
>>>>>>>>>>>>>> nowadays
>>>>>>>>>>>>>> to
>>>>>>>>>>>>>> get the sound of a single guitar track to stack up against
>>>>>>>>>>>>>> the
>>>>>>>>>>>>>> uberly
>>>>>>>>>>>>>> processed multi-amp and multi-mic rigs people are using on
>>>>>>>>>>>>>> commercial
>>>>>>>>>>>>>> records, so if it sounds small on its own, that's probably
>>>>>>>>>>>>>> ok,
>>>>>>>>>>>>>> that's
>>>>>>>>>>>>>> what multitracking will fix.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hope that all makes sense. Shout if I've used any terms
>>>>>>>>>>>>>> you're
>>>>>>>>>>>>>> not
>>>>>>>>>>>>>> familiar with. It sounds like quite a time and energy
>>>>>>>>>>>>>> investment
>>>>>>>>>>>>>> written down, but it's even more so in real life :P
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Scott
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On 10/28/14, Hadi Rezaee <hadirezaei at gmx.com> wrote:
>>>>>>>>>>>>>>> Hi scott.
>>>>>>>>>>>>>>> Thanks for replying!
>>>>>>>>>>>>>>> My gain on the audio interface was all the way to the end.
>>>>>>>>>>>>>>> so
>>>>>>>>>>>>>>> yeah,
>>>>>>>>>>>>>>> my
>>>>>>>>>>>>>>> gain was fully hot!
>>>>>>>>>>>>>>> I didn't know i have to bring down the gain my my audio
>>>>>>>>>>>>>>> interface.
>>>>>>>>>>>>>>> If i do that, my electric guitar won't sound as fat as i
>>>>>>>>>>>>>>> want.
>>>>>>>>>>>>>>> What
>>>>>>>>>>>>>>> should i do then?
>>>>>>>>>>>>>>> I need to get that thick sound, so for that i increase the
>>>>>>>>>>>>>>> audio
>>>>>>>>>>>>>>> interface gain. am i doing the wrong thing? (I think i am)
>>>>>>>>>>>>>>> So what should i do then!
>>>>>>>>>>>>>>> On 10/29/2014 12:55 AM, Scott Chesworth wrote:
>>>>>>>>>>>>>>>> From a quick listen on laptop speakers, it sounds like
>>>>>>>>>>>>>>>> you're
>>>>>>>>>>>>>>>> running
>>>>>>>>>>>>>>>> into that amp sim way too hot. Remember, these sims are
>>>>>>>>>>>>>>>> mimicking
>>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>>> response of a real amp as closely as possible, and a real
>>>>>>>>>>>>>>>> amp
>>>>>>>>>>>>>>>> generally doesn't have a heap of gain before it in the
>>>>>>>>>>>>>>>> signal
>>>>>>>>>>>>>>>> chain.
>>>>>>>>>>>>>>>> I
>>>>>>>>>>>>>>>> don't want to encourage bad habits, but when I'm recording
>>>>>>>>>>>>>>>> guitar
>>>>>>>>>>>>>>>> through plugins like that, I pretty much ignore the meters
>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>> look
>>>>>>>>>>>>>>>> for the most realistic feel from the software instead of
>>>>>>>>>>>>>>>> worrying
>>>>>>>>>>>>>>>> about getting a level that's deemed to be good practice.
>>>>>>>>>>>>>>>> Often
>>>>>>>>>>>>>>>> when
>>>>>>>>>>>>>>>> I'm mixing stuff for people who have recorded themselves, I
>>>>>>>>>>>>>>>> find
>>>>>>>>>>>>>>>> that
>>>>>>>>>>>>>>>> I'm trimming 30 DB or more off of DI guitars before my
>>>>>>>>>>>>>>>> plugins
>>>>>>>>>>>>>>>> start
>>>>>>>>>>>>>>>> responding anything like real-world amps. So yeah, first
>>>>>>>>>>>>>>>> step,
>>>>>>>>>>>>>>>> turn
>>>>>>>>>>>>>>>> down the gain on your interface.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Couldn't get any sense of what style pickups you're playing
>>>>>>>>>>>>>>>> from
>>>>>>>>>>>>>>>> this,
>>>>>>>>>>>>>>>> but they're also going to raise the noise floor. Nearby
>>>>>>>>>>>>>>>> electronics
>>>>>>>>>>>>>>>> could also be adding to that, so unless you're certain your
>>>>>>>>>>>>>>>> guitar
>>>>>>>>>>>>>>>> is
>>>>>>>>>>>>>>>> well shielded it'd be worth spending a minute spinning
>>>>>>>>>>>>>>>> around
>>>>>>>>>>>>>>>> in
>>>>>>>>>>>>>>>> your
>>>>>>>>>>>>>>>> chair, walking around the room a bit etc with everything
>>>>>>>>>>>>>>>> wired
>>>>>>>>>>>>>>>> up
>>>>>>>>>>>>>>>> as
>>>>>>>>>>>>>>>> you usually would to see if there's a place where that
>>>>>>>>>>>>>>>> guitar
>>>>>>>>>>>>>>>> is
>>>>>>>>>>>>>>>> in
>>>>>>>>>>>>>>>> its happy place. It's also worth noting that a lot of great
>>>>>>>>>>>>>>>> heavy
>>>>>>>>>>>>>>>> guitar sounds are just noisy as hell when there's nothing
>>>>>>>>>>>>>>>> playing,
>>>>>>>>>>>>>>>> so
>>>>>>>>>>>>>>>> concentrate on the sounds you're getting when you're
>>>>>>>>>>>>>>>> actually
>>>>>>>>>>>>>>>> playing
>>>>>>>>>>>>>>>> music first and foremost. That's the stuff that matters.
>>>>>>>>>>>>>>>> Sometimes,
>>>>>>>>>>>>>>>> it's just gonna be noisy as hell and you're gonna have to
>>>>>>>>>>>>>>>> run
>>>>>>>>>>>>>>>> through
>>>>>>>>>>>>>>>> the song to clean up the exposed gaps manually. I've
>>>>>>>>>>>>>>>> recorded
>>>>>>>>>>>>>>>> a
>>>>>>>>>>>>>>>> few
>>>>>>>>>>>>>>>> real amps where the hiss alone was scary to be in a room
>>>>>>>>>>>>>>>> with,
>>>>>>>>>>>>>>>> one
>>>>>>>>>>>>>>>> of
>>>>>>>>>>>>>>>> those situations if someone decides this is the perfect
>>>>>>>>>>>>>>>> time
>>>>>>>>>>>>>>>> to
>>>>>>>>>>>>>>>> practice, then you're instantly dead by shred lol. I
>>>>>>>>>>>>>>>> suppose
>>>>>>>>>>>>>>>> what
>>>>>>>>>>>>>>>> I'm
>>>>>>>>>>>>>>>> saying is that concentrating on cleaning up your sounds is
>>>>>>>>>>>>>>>> all
>>>>>>>>>>>>>>>> well
>>>>>>>>>>>>>>>> and good, but don't get fooled into not recording until
>>>>>>>>>>>>>>>> everything
>>>>>>>>>>>>>>>> is
>>>>>>>>>>>>>>>> perfect, because it's rare that anyone gets there, and a
>>>>>>>>>>>>>>>> lot
>>>>>>>>>>>>>>>> of
>>>>>>>>>>>>>>>> people
>>>>>>>>>>>>>>>> never end up recording anything that they care about
>>>>>>>>>>>>>>>> because
>>>>>>>>>>>>>>>> they're
>>>>>>>>>>>>>>>> stuck down that rabbit hole.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Good luck, and keep us posted
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Scott
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On 10/28/14, Hadi Rezaee <hadirezaei at gmx.com> wrote:
>>>>>>>>>>>>>>>>> Hi guys
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> I know that there are very great members in this
>>>>>>>>>>>>>>>>> MailingList
>>>>>>>>>>>>>>>>> who
>>>>>>>>>>>>>>>>> produce
>>>>>>>>>>>>>>>>> awesome content even with limited resources.
>>>>>>>>>>>>>>>>> I need some advice/instructions about guitar sims, and how
>>>>>>>>>>>>>>>>> can
>>>>>>>>>>>>>>>>> i
>>>>>>>>>>>>>>>>> decrease their hiss, and fuzz sounds.
>>>>>>>>>>>>>>>>> I'm sure that everything in my physical environment is
>>>>>>>>>>>>>>>>> ok,
>>>>>>>>>>>>>>>>> i
>>>>>>>>>>>>>>>>> got
>>>>>>>>>>>>>>>>> a
>>>>>>>>>>>>>>>>> very
>>>>>>>>>>>>>>>>> great cable with a scarlett 8i6 audio interface, so I
>>>>>>>>>>>>>>>>> think
>>>>>>>>>>>>>>>>> from
>>>>>>>>>>>>>>>>> this
>>>>>>>>>>>>>>>>> aspect, I should not get any noise or anything.
>>>>>>>>>>>>>>>>> Here's my REAPER FX chain, that i normally use:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> tse tube screamer
>>>>>>>>>>>>>>>>> Lepou lecto
>>>>>>>>>>>>>>>>> ReaVerb with some great mesa boogi cabs, (god cabs)
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> That's all I've got. I have no noise gates, no EQ,
>>>>>>>>>>>>>>>>> (Because
>>>>>>>>>>>>>>>>> i
>>>>>>>>>>>>>>>>> don't
>>>>>>>>>>>>>>>>> know how to work with them.
>>>>>>>>>>>>>>>>> First of all, when i crank up the input, There's a big
>>>>>>>>>>>>>>>>> hissing
>>>>>>>>>>>>>>>>> sound
>>>>>>>>>>>>>>>>> in
>>>>>>>>>>>>>>>>> the background, even when i'm not playing. It looks like a
>>>>>>>>>>>>>>>>> regular
>>>>>>>>>>>>>>>>> amp
>>>>>>>>>>>>>>>>> hissing sound, but it's just too loud, and I want to cut
>>>>>>>>>>>>>>>>> this
>>>>>>>>>>>>>>>>> off,
>>>>>>>>>>>>>>>>> so
>>>>>>>>>>>>>>>>> i
>>>>>>>>>>>>>>>>> could record without any hissing noises.
>>>>>>>>>>>>>>>>> Second, I think the sound is having a little bit of fuz,
>>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>>> is
>>>>>>>>>>>>>>>>> not
>>>>>>>>>>>>>>>>> too
>>>>>>>>>>>>>>>>> warm for me.
>>>>>>>>>>>>>>>>> I want to try to achieve that big, smooth warm sound of
>>>>>>>>>>>>>>>>> electric
>>>>>>>>>>>>>>>>> guitar.
>>>>>>>>>>>>>>>>> Here's a simple test that you can hear
>>>>>>>>>>>>>>>>> https://dl.dropboxusercontent.com/u/87868354/Hadi_guitar_tone_test.mp3
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Also, by the way, as you see, my vollume is kind of..
>>>>>>>>>>>>>>>>> low.
>>>>>>>>>>>>>>>>> if
>>>>>>>>>>>>>>>>> i
>>>>>>>>>>>>>>>>> try
>>>>>>>>>>>>>>>>> to
>>>>>>>>>>>>>>>>> raise reaper's master vollume, or the track vollume, i get
>>>>>>>>>>>>>>>>> a
>>>>>>>>>>>>>>>>> very
>>>>>>>>>>>>>>>>> bad
>>>>>>>>>>>>>>>>> buzzing sound on the guitar.
>>>>>>>>>>>>>>>>> Can anyone help me with this?
>>>>>>>>>>>>>>>>> Thanks!
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>> RWP mailing list
>>>>>>>>>>>>>>>>> RWP at reaaccess.com
>>>>>>>>>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>> RWP mailing list
>>>>>>>>>>>>>>>> RWP at reaaccess.com
>>>>>>>>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>> RWP mailing list
>>>>>>>>>>>>>>> RWP at reaaccess.com
>>>>>>>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>> RWP mailing list
>>>>>>>>>>>>>> RWP at reaaccess.com
>>>>>>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>> RWP mailing list
>>>>>>>>>>>>> RWP at reaaccess.com
>>>>>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>>>>>>
>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>> RWP mailing list
>>>>>>>>>>>> RWP at reaaccess.com
>>>>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> RWP mailing list
>>>>>>>>>>> RWP at reaaccess.com
>>>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> RWP mailing list
>>>>>>>>>> RWP at reaaccess.com
>>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> RWP mailing list
>>>>>>>>> RWP at reaaccess.com
>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> RWP mailing list
>>>>>>>> RWP at reaaccess.com
>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> RWP mailing list
>>>>>>> RWP at reaaccess.com
>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>
>>>>>> _______________________________________________
>>>>>> RWP mailing list
>>>>>> RWP at reaaccess.com
>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>
>>>>> _______________________________________________
>>>>> RWP mailing list
>>>>> RWP at reaaccess.com
>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>
>>>>
>>>> _______________________________________________
>>>> RWP mailing list
>>>> RWP at reaaccess.com
>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>
>>>
>>>
>>> --
>>> Sincerely,
>>>
>>> Keith
>>> Website:
>>> http://eshop.keithnet.us
>>> Home Phone:
>>> 928-554-3936
>>> Mobile Phone:
>>> 928-713-6370
>>> Primary email:
>>> keithint1234 at gmail.com
>>> Twitter:
>>> @keithint1234
>>> Facebook:
>>> http://facebook.com/keith.hinton1
>>> Skype:
>>> skypedude1234
>>>
>>> _______________________________________________
>>> RWP mailing list
>>> RWP at reaaccess.com
>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>
>>
>> _______________________________________________
>> RWP mailing list
>> RWP at reaaccess.com
>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>
>>
>> _______________________________________________
>> RWP mailing list
>> RWP at reaaccess.com
>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>
>
> _______________________________________________
> RWP mailing list
> RWP at reaaccess.com
> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>
>
> _______________________________________________
> RWP mailing list
> RWP at reaaccess.com
> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>
_______________________________________________
RWP mailing list
RWP at reaaccess.com
http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
More information about the Rwp
mailing list