[RWP] Automation

[Jim Snowbarger]

So, you can't edit the automation.  but, once you lay down automation for a 
track, and don't like how it turned out, can you go back and just redo it 
from scratch?

----- Original Message ----- 
From: "Derek Lane" <derek at pdaudio.net>
To: "Reapers Without Peepers" <rwp at reaaccess.com>
Sent: Wednesday, May 28, 2014 7:12 PM
Subject: Re: [RWP] Automation


>I have a bcf2000, and really like it.
> Once you set it to mackie universal control, you're set.
> This is done by pressing the top left button in the bank of 16 buttons, 
> while turning the power on.
> Turn the bcf off again, and then back on, and you're in universal control 
> mode.
> However, we have no means of editing automation at this point, so although 
> volume/pan/etc. can be automated, its almost impossible to make any 
> changes after the fact.
>
>
>
> ----- Original Message ----- 
> From: "Jim Snowbarger" <Snowman at SnowmanRadio.com>
> To: "Reapers Without Peepers" <rwp at reaaccess.com>
> Sent: Wednesday, May 28, 2014 6:47 PM
> Subject: [RWP] Automation
>
>
>> Speaking of this fade curve issue.  How are people fairing with the 
>> BCF2000, and the ability to record fader movements on the fly?
>> I know we talked a bunch about this automation thing a while back, and I 
>> lost track of where we are.  Does anybody her have a BCf, or BCR?  What 
>> are your experiences with that?
>>
>> ----- Original Message ----- 
>> From: "Derek Lane" <derek at pdaudio.net>
>> To: "Reapers Without Peepers" <rwp at reaaccess.com>
>> Sent: Tuesday, May 27, 2014 10:32 PM
>> Subject: Re: [RWP] Just my opinion, ducking and reacomp
>>
>>
>>> There is a look ahead parameter as part of reacomp, which takes care of 
>>> that.
>>> However, I've used splitting items, each at different volumes, and 
>>> growing/shrinking them to get the exact timing and curve I want.
>>>
>>>
>>>
>>> ----- Original Message ----- 
>>> From: "Jim Snowbarger" <Snowman at SnowmanRadio.com>
>>> To: "Reapers Without Peepers" <rwp at reaaccess.com>
>>> Sent: Tuesday, May 27, 2014 11:00 PM
>>> Subject: Re: [RWP] Just my opinion, ducking and reacomp
>>>
>>>
>>>> But, of course, if you want the slow duck to start ahead of the voice, 
>>>> so the music is already down by the time speech starts, you have a more 
>>>> complicated situation.
>>>> You can probabl bring delays into the circuit to achieve that.    But, 
>>>> manual ducking really does lend itself to a more flexible profile.
>>>> ----- Original Message ----- 
>>>> From: "TheOreoMonster" <TheOreoMonster at reaperacc.es>
>>>> To: "Reapers Without Peepers" <rwp at reaaccess.com>
>>>> Sent: Tuesday, May 27, 2014 8:02 PM
>>>> Subject: Re: [RWP] Just my opinion, ducking and reacomp
>>>>
>>>>
>>>>> Play with the attack and release times, attack set how quickly the 
>>>>> compressor kicks in, and release how quickly it kicks off.
>>>>> On May 26, 2014, at 2:16 PM, Jes <jessmith at samobile.net> wrote:
>>>>>
>>>>>> Hi all.
>>>>>>
>>>>>> Maybe I'm not doing something right, but I find that using a 
>>>>>> compressor to duck down a music track while a voice track is going 
>>>>>> just doesn't sound as natural as a manual do it yourself good oale 
>>>>>> fassioned fade down, like you can make with sound forge. To me, 
>>>>>> manually fading down music while talking and fading it back up cannot 
>>>>>> be beat using an automated plugin. I find that reacomp fades the 
>>>>>> music down way too quickly, and then fades it up so quickly that it's 
>>>>>> not even noticable. Again, maybe I'm not doing something right. Any 
>>>>>> thoughts on this?
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> RWP mailing list
>>>>>> RWP at reaaccess.com
>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> RWP mailing list
>>>>> RWP at reaaccess.com
>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> RWP mailing list
>>>> RWP at reaaccess.com
>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>
>>>
>>>
>>> _______________________________________________
>>> RWP mailing list
>>> RWP at reaaccess.com
>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>
>>
>>
>>
>> _______________________________________________
>> RWP mailing list
>> RWP at reaaccess.com
>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>
>
>
> _______________________________________________
> RWP mailing list
> RWP at reaaccess.com
> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>