[RWP] A good soundcard for a voice over talent?

Mario Loreti mario.loreti at gmail.com
Mon Jun 30 05:45:34 EDT 2014 

Thank you, I have to think about adding a firewire card to my PC.
Il 30/06/2014 11:41, Chris Belle ha scritto:
> Yes.
>
>
> On 6/29/2014 10:17 AM, Mario Loreti wrote:
>> Thanks, but, are you talking about a mixer?
>>
>> is this produced by makie?
>> Il 29/06/2014 12:39, Chris Belle ha scritto:
>>> for what your wanting to do though the litle 820 i would be perfect.
>>>
>>>
>>> On 6/29/2014 4:08 AM, Mario Loreti wrote:
>>>> Sorry, what is Studio Live?
>>>> Il 28/06/2014 17:11, Chris Belle ha scritto:
>>>>> Yeh, nothing's perfect for us, but this kind of thing offers the 
>>>>> most flexibility and the least headaches.
>>>>>
>>>>> I'm curious about the midas stuf, and the allen & heath zed r16.
>>>>>
>>>>> since mackie changed their firewire chipset and the interface is 
>>>>> no longer accessible.
>>>>>
>>>>> But the only thing I ever needed to change in there was the 
>>>>> latency setting.
>>>>>
>>>>>
>>>>> On 6/28/2014 9:33 AM, Patrick Perdue wrote:
>>>>>> Yeah. Still like my StudioLive as much as I ever have, with the 
>>>>>> same few complaints. I have different versions of those same 
>>>>>> complaints with just about any digital or analog mixer hybrid 
>>>>>> audio interface, so that just comes with the territory.
>>>>>>
>>>>>> Sent from my iPhone
>>>>>>
>>>>>>> On Jun 28, 2014, at 7:39, Chris Belle <cb1963 at sbcglobal.net> wrote:
>>>>>>>
>>>>>>> yeh Patrick and considering the headaches that can happen for us 
>>>>>>> when we try and match this stuff up.
>>>>>>>
>>>>>>> You might remember the headaches I had with the octane pres and 
>>>>>>> the profire 2626
>>>>>>> I had to set the clock to the octane, and the profire wouldn't 
>>>>>>> run without the octane connected and it wasn't
>>>>>>> turned on,
>>>>>>> and I was limited to 48k, and I could have gone straight line in 
>>>>>>> I guess, but I didn't have 8 line inputs on that thing, and that 
>>>>>>> would defeat the whole purpose of why I bought the octane, to 
>>>>>>> have 8 more inputs.
>>>>>>>
>>>>>>> So that meant getting in to the interface to set both clock 
>>>>>>> source, and or change sampling rates.
>>>>>>> on a regular bassis.
>>>>>>>
>>>>>>> and I couldn'[t make presets, because loading them, you still 
>>>>>>> had to wiggle a knob to make anything work, so I finally said 
>>>>>>> screw it, I'm going analog as much as I can for my signal path.
>>>>>>>
>>>>>>> For my monitoring, and everything,
>>>>>>> input to the interface, and life has been much easier since then.
>>>>>>>
>>>>>>> I guess we both kind of did the same thing, except I got the 
>>>>>>> mackie and you got the studio live.
>>>>>>>
>>>>>>> I'm not against digital at all, but it sure depends on a lot of 
>>>>>>> other things being right, and also as we've seen where they put 
>>>>>>> the digital in the signal path.
>>>>>>>
>>>>>>>
>>>>>>>> On 6/28/2014 6:13 AM, Patrick Perdue wrote:
>>>>>>>> I'm looking at an upgrade from my ART TPS-II. I'd really like 
>>>>>>>> two channels of Focusrite Isa One, or the 610 you mentioned, 
>>>>>>>> but won't be buying anything for a while, as I'm about to move. 
>>>>>>>> Fun stuff to look for in the future, though.
>>>>>>>>
>>>>>>>>   I don't particularly need a digital output, though it would 
>>>>>>>> be nice to have, assuming the  A/D doesn't suck. I have seen a 
>>>>>>>> couple of low end  preamps where the digital output is  noisier 
>>>>>>>> than the analog output. Sent from my iPhone
>>>>>>>>
>>>>>>>>> On Jun 28, 2014, at 6:54, Mario Loreti 
>>>>>>>>> <mario.loreti at gmail.com> wrote:
>>>>>>>>>
>>>>>>>>> I have a Neumann TLM 102 and yes, a Rode NT1A.
>>>>>>>>>
>>>>>>>>> Good idea to use a preamp with an SPDIF. I want to change also 
>>>>>>>>> the preamp in the future, actually I have a TL-Audio Hivory 
>>>>>>>>> 5051 channel strip that works as a preamp, a compressor and 
>>>>>>>>> EQ, but it's noisy.
>>>>>>>>>
>>>>>>>>> I'm oriented on the Universal Audio Solo 610, but I don't know 
>>>>>>>>> if this has an SPDIF out, probably not. My dream is an Avalon 
>>>>>>>>> VT737SP, but it's only a dream for now, because of budget 
>>>>>>>>> reasons.
>>>>>>>>>
>>>>>>>>> Has anyone used the UAD 2 plugins?
>>>>>>>>> Other suggestions?
>>>>>>>>> Il 28/06/2014 12:29, Patrick Perdue ha scritto:
>>>>>>>>>> The Deltas are good old cards, but the analog input section 
>>>>>>>>>> has been far surpassed by lots of other stuff. If you still 
>>>>>>>>>> want to keep that card around, you could always go the route 
>>>>>>>>>> of finding a good preamp with sp/dif out, and slaving your 
>>>>>>>>>> Delta's clock to that, thereby not using the Delta's A/D 
>>>>>>>>>> section for input.
>>>>>>>>>> No idea if the Roland preamps are good.
>>>>>>>>>>
>>>>>>>>>> Of course, things also depend on what mics you are using.
>>>>>>>>>> If I remember, you have a Neumann TLM103 and a Rode NT1A?
>>>>>>>>>>
>>>>>>>>>>> On 6/28/2014 5:34 AM, Mario Loreti wrote:
>>>>>>>>>>> Hi, I was looking on it.
>>>>>>>>>>>
>>>>>>>>>>> Actually I have an M-Audio Delta1010LT, and now I was 
>>>>>>>>>>> looking at a
>>>>>>>>>>> better a/d conversion.
>>>>>>>>>>>
>>>>>>>>>>> Do you believe that this a / d can be better?
>>>>>>>>>>> Il 27/06/2014 19:20, Brandon Keith Biggs ha scritto:
>>>>>>>>>>>> Have you looked at the Roland quad? Dancing Dots sells them.
>>>>>>>>>>>> thanks,
>>>>>>>>>>>>
>>>>>>>>>>>> Brandon Keith Biggs
>>>>>>>>>>>>
>>>>>>>>>>>>> On 6/27/2014 4:32 AM, Mario Loreti wrote:
>>>>>>>>>>>>> I've looked to the focusrite forte. Why you have preferred 
>>>>>>>>>>>>> the motu
>>>>>>>>>>>>> to the focusrite?
>>>>>>>>>>>>> Il 27/06/2014 10:19, Patrick Perdue ha scritto:
>>>>>>>>>>>>>> Have you looked at Focusrite stuff? Those have good 
>>>>>>>>>>>>>> preamps, even
>>>>>>>>>>>>>> their low-end stuff. I had a Saffire Pro14, loved the 
>>>>>>>>>>>>>> sound, but
>>>>>>>>>>>>>> ended up replacing it with a MOTU Audio Express.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Sent from my iPhone
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Jun 27, 2014, at 3:34, Mario Loreti 
>>>>>>>>>>>>>>> <mario.loreti at gmail.com> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Hi, I'm looking for a good soundcard with good a/d 
>>>>>>>>>>>>>>> converters.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I've looked at the RME interfaces, but these have too 
>>>>>>>>>>>>>>> many inputs
>>>>>>>>>>>>>>> and outputs, I'am looking for 4 in and 4 out, not 8 or 10.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Can anyone suggest something?
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Thanks.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>> RWP mailing list
>>>>>>>>>>>>>>> RWP at reaaccess.com
>>>>>>>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>> RWP mailing list
>>>>>>>>>>>>>> RWP at reaaccess.com
>>>>>>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>> RWP mailing list
>>>>>>>>>>>>> RWP at reaaccess.com
>>>>>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>> RWP mailing list
>>>>>>>>>>>> RWP at reaaccess.com
>>>>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> RWP mailing list
>>>>>>>>>>> RWP at reaaccess.com
>>>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>>> _______________________________________________
>>>>>>>>>> RWP mailing list
>>>>>>>>>> RWP at reaaccess.com
>>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>> _______________________________________________
>>>>>>>>> RWP mailing list
>>>>>>>>> RWP at reaaccess.com
>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>> _______________________________________________
>>>>>>>> RWP mailing list
>>>>>>>> RWP at reaaccess.com
>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> RWP mailing list
>>>>>>> RWP at reaaccess.com
>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>> _______________________________________________
>>>>>> RWP mailing list
>>>>>> RWP at reaaccess.com
>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> RWP mailing list
>>>>> RWP at reaaccess.com
>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>
>>>>
>>>> _______________________________________________
>>>> RWP mailing list
>>>> RWP at reaaccess.com
>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>
>>>
>>>
>>> _______________________________________________
>>> RWP mailing list
>>> RWP at reaaccess.com
>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>
>>
>> _______________________________________________
>> RWP mailing list
>> RWP at reaaccess.com
>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>
>
>
> _______________________________________________
> RWP mailing list
> RWP at reaaccess.com
> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com

More information about the Rwp mailing list