[RWP] A good soundcard for a voice over talent?

Mon Jun 30 05:41:17 EDT 2014

Yes.

On 6/29/2014 10:17 AM, Mario Loreti wrote:
> Thanks, but, are you talking about a mixer?
>
> is this produced by makie?
> Il 29/06/2014 12:39, Chris Belle ha scritto:
>> for what your wanting to do though the litle 820 i would be perfect.
>>
>>
>> On 6/29/2014 4:08 AM, Mario Loreti wrote:
>>> Sorry, what is Studio Live?
>>> Il 28/06/2014 17:11, Chris Belle ha scritto:
>>>> Yeh, nothing's perfect for us, but this kind of thing offers the 
>>>> most flexibility and the least headaches.
>>>>
>>>> I'm curious about the midas stuf, and the allen & heath zed r16.
>>>>
>>>> since mackie changed their firewire chipset and the interface is no 
>>>> longer accessible.
>>>>
>>>> But the only thing I ever needed to change in there was the latency 
>>>> setting.
>>>>
>>>>
>>>> On 6/28/2014 9:33 AM, Patrick Perdue wrote:
>>>>> Yeah. Still like my StudioLive as much as I ever have, with the 
>>>>> same few complaints. I have different versions of those same 
>>>>> complaints with just about any digital or analog mixer hybrid 
>>>>> audio interface, so that just comes with the territory.
>>>>>
>>>>> Sent from my iPhone
>>>>>
>>>>>> On Jun 28, 2014, at 7:39, Chris Belle <cb1963 at sbcglobal.net> wrote:
>>>>>>
>>>>>> yeh Patrick and considering the headaches that can happen for us 
>>>>>> when we try and match this stuff up.
>>>>>>
>>>>>> You might remember the headaches I had with the octane pres and 
>>>>>> the profire 2626
>>>>>> I had to set the clock to the octane, and the profire wouldn't 
>>>>>> run without the octane connected and it wasn't
>>>>>> turned on,
>>>>>> and I was limited to 48k, and I could have gone straight line in 
>>>>>> I guess, but I didn't have 8 line inputs on that thing, and that 
>>>>>> would defeat the whole purpose of why I bought the octane, to 
>>>>>> have 8 more inputs.
>>>>>>
>>>>>> So that meant getting in to the interface to set both clock 
>>>>>> source, and or change sampling rates.
>>>>>> on a regular bassis.
>>>>>>
>>>>>> and I couldn'[t make presets, because loading them, you still had 
>>>>>> to wiggle a knob to make anything work, so I finally said screw 
>>>>>> it, I'm going analog as much as I can for my signal path.
>>>>>>
>>>>>> For my monitoring, and everything,
>>>>>> input to the interface, and life has been much easier since then.
>>>>>>
>>>>>> I guess we both kind of did the same thing, except I got the 
>>>>>> mackie and you got the studio live.
>>>>>>
>>>>>> I'm not against digital at all, but it sure depends on a lot of 
>>>>>> other things being right, and also as we've seen where they put 
>>>>>> the digital in the signal path.
>>>>>>
>>>>>>
>>>>>>> On 6/28/2014 6:13 AM, Patrick Perdue wrote:
>>>>>>> I'm looking at an upgrade from my ART TPS-II. I'd really like 
>>>>>>> two channels of Focusrite Isa One, or the 610 you mentioned, but 
>>>>>>> won't be buying anything for a while, as I'm about to move. Fun 
>>>>>>> stuff to look for in the future, though.
>>>>>>>
>>>>>>>   I don't particularly need a digital output, though it would be 
>>>>>>> nice to have, assuming the  A/D doesn't suck. I have seen a 
>>>>>>> couple of low end  preamps where the digital output is  noisier 
>>>>>>> than the analog output. Sent from my iPhone
>>>>>>>
>>>>>>>> On Jun 28, 2014, at 6:54, Mario Loreti <mario.loreti at gmail.com> 
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>> I have a Neumann TLM 102 and yes, a Rode NT1A.
>>>>>>>>
>>>>>>>> Good idea to use a preamp with an SPDIF. I want to change also 
>>>>>>>> the preamp in the future, actually I have a TL-Audio Hivory 
>>>>>>>> 5051 channel strip that works as a preamp, a compressor and EQ, 
>>>>>>>> but it's noisy.
>>>>>>>>
>>>>>>>> I'm oriented on the Universal Audio Solo 610, but I don't know 
>>>>>>>> if this has an SPDIF out, probably not. My dream is an Avalon 
>>>>>>>> VT737SP, but it's only a dream for now, because of budget reasons.
>>>>>>>>
>>>>>>>> Has anyone used the UAD 2 plugins?
>>>>>>>> Other suggestions?
>>>>>>>> Il 28/06/2014 12:29, Patrick Perdue ha scritto:
>>>>>>>>> The Deltas are good old cards, but the analog input section 
>>>>>>>>> has been far surpassed by lots of other stuff. If you still 
>>>>>>>>> want to keep that card around, you could always go the route 
>>>>>>>>> of finding a good preamp with sp/dif out, and slaving your 
>>>>>>>>> Delta's clock to that, thereby not using the Delta's A/D 
>>>>>>>>> section for input.
>>>>>>>>> No idea if the Roland preamps are good.
>>>>>>>>>
>>>>>>>>> Of course, things also depend on what mics you are using.
>>>>>>>>> If I remember, you have a Neumann TLM103 and a Rode NT1A?
>>>>>>>>>
>>>>>>>>>> On 6/28/2014 5:34 AM, Mario Loreti wrote:
>>>>>>>>>> Hi, I was looking on it.
>>>>>>>>>>
>>>>>>>>>> Actually I have an M-Audio Delta1010LT, and now I was looking 
>>>>>>>>>> at a
>>>>>>>>>> better a/d conversion.
>>>>>>>>>>
>>>>>>>>>> Do you believe that this a / d can be better?
>>>>>>>>>> Il 27/06/2014 19:20, Brandon Keith Biggs ha scritto:
>>>>>>>>>>> Have you looked at the Roland quad? Dancing Dots sells them.
>>>>>>>>>>> thanks,
>>>>>>>>>>>
>>>>>>>>>>> Brandon Keith Biggs
>>>>>>>>>>>
>>>>>>>>>>>> On 6/27/2014 4:32 AM, Mario Loreti wrote:
>>>>>>>>>>>> I've looked to the focusrite forte. Why you have preferred 
>>>>>>>>>>>> the motu
>>>>>>>>>>>> to the focusrite?
>>>>>>>>>>>> Il 27/06/2014 10:19, Patrick Perdue ha scritto:
>>>>>>>>>>>>> Have you looked at Focusrite stuff? Those have good 
>>>>>>>>>>>>> preamps, even
>>>>>>>>>>>>> their low-end stuff. I had a Saffire Pro14, loved the 
>>>>>>>>>>>>> sound, but
>>>>>>>>>>>>> ended up replacing it with a MOTU Audio Express.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Sent from my iPhone
>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Jun 27, 2014, at 3:34, Mario Loreti 
>>>>>>>>>>>>>> <mario.loreti at gmail.com> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi, I'm looking for a good soundcard with good a/d 
>>>>>>>>>>>>>> converters.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I've looked at the RME interfaces, but these have too 
>>>>>>>>>>>>>> many inputs
>>>>>>>>>>>>>> and outputs, I'am looking for 4 in and 4 out, not 8 or 10.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Can anyone suggest something?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Thanks.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>> RWP mailing list
>>>>>>>>>>>>>> RWP at reaaccess.com
>>>>>>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>> RWP mailing list
>>>>>>>>>>>>> RWP at reaaccess.com
>>>>>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>> RWP mailing list
>>>>>>>>>>>> RWP at reaaccess.com
>>>>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> RWP mailing list
>>>>>>>>>>> RWP at reaaccess.com
>>>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>>> _______________________________________________
>>>>>>>>>> RWP mailing list
>>>>>>>>>> RWP at reaaccess.com
>>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>> _______________________________________________
>>>>>>>>> RWP mailing list
>>>>>>>>> RWP at reaaccess.com
>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>> _______________________________________________
>>>>>>>> RWP mailing list
>>>>>>>> RWP at reaaccess.com
>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>> _______________________________________________
>>>>>>> RWP mailing list
>>>>>>> RWP at reaaccess.com
>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>
>>>>>> _______________________________________________
>>>>>> RWP mailing list
>>>>>> RWP at reaaccess.com
>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>> _______________________________________________
>>>>> RWP mailing list
>>>>> RWP at reaaccess.com
>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> RWP mailing list
>>>> RWP at reaaccess.com
>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>
>>>
>>> _______________________________________________
>>> RWP mailing list
>>> RWP at reaaccess.com
>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>
>>
>>
>> _______________________________________________
>> RWP mailing list
>> RWP at reaaccess.com
>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>
>
> _______________________________________________
> RWP mailing list
> RWP at reaaccess.com
> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>