[RWP] A good soundcard for a voice over talent?

Sun Jun 29 11:17:59 EDT 2014

Thanks, but, are you talking about a mixer?

is this produced by makie?
Il 29/06/2014 12:39, Chris Belle ha scritto:
> for what your wanting to do though the litle 820 i would be perfect.
>
>
> On 6/29/2014 4:08 AM, Mario Loreti wrote:
>> Sorry, what is Studio Live?
>> Il 28/06/2014 17:11, Chris Belle ha scritto:
>>> Yeh, nothing's perfect for us, but this kind of thing offers the 
>>> most flexibility and the least headaches.
>>>
>>> I'm curious about the midas stuf, and the allen & heath zed r16.
>>>
>>> since mackie changed their firewire chipset and the interface is no 
>>> longer accessible.
>>>
>>> But the only thing I ever needed to change in there was the latency 
>>> setting.
>>>
>>>
>>> On 6/28/2014 9:33 AM, Patrick Perdue wrote:
>>>> Yeah. Still like my StudioLive as much as I ever have, with the 
>>>> same few complaints. I have different versions of those same 
>>>> complaints with just about any digital or analog mixer hybrid audio 
>>>> interface, so that just comes with the territory.
>>>>
>>>> Sent from my iPhone
>>>>
>>>>> On Jun 28, 2014, at 7:39, Chris Belle <cb1963 at sbcglobal.net> wrote:
>>>>>
>>>>> yeh Patrick and considering the headaches that can happen for us 
>>>>> when we try and match this stuff up.
>>>>>
>>>>> You might remember the headaches I had with the octane pres and 
>>>>> the profire 2626
>>>>> I had to set the clock to the octane, and the profire wouldn't run 
>>>>> without the octane connected and it wasn't
>>>>> turned on,
>>>>> and I was limited to 48k, and I could have gone straight line in I 
>>>>> guess, but I didn't have 8 line inputs on that thing, and that 
>>>>> would defeat the whole purpose of why I bought the octane, to have 
>>>>> 8 more inputs.
>>>>>
>>>>> So that meant getting in to the interface to set both clock 
>>>>> source, and or change sampling rates.
>>>>> on a regular bassis.
>>>>>
>>>>> and I couldn'[t make presets, because loading them, you still had 
>>>>> to wiggle a knob to make anything work, so I finally said screw 
>>>>> it, I'm going analog as much as I can for my signal path.
>>>>>
>>>>> For my monitoring, and everything,
>>>>> input to the interface, and life has been much easier since then.
>>>>>
>>>>> I guess we both kind of did the same thing, except I got the 
>>>>> mackie and you got the studio live.
>>>>>
>>>>> I'm not against digital at all, but it sure depends on a lot of 
>>>>> other things being right, and also as we've seen where they put 
>>>>> the digital in the signal path.
>>>>>
>>>>>
>>>>>> On 6/28/2014 6:13 AM, Patrick Perdue wrote:
>>>>>> I'm looking at an upgrade from my ART TPS-II. I'd really like two 
>>>>>> channels of Focusrite Isa One, or the 610 you mentioned, but 
>>>>>> won't be buying anything for a while, as I'm about to move. Fun 
>>>>>> stuff to look for in the future, though.
>>>>>>
>>>>>>   I don't particularly need a digital output, though it would be 
>>>>>> nice to have, assuming the  A/D doesn't suck. I have seen a 
>>>>>> couple of low end  preamps where the digital output is  noisier 
>>>>>> than the analog output. Sent from my iPhone
>>>>>>
>>>>>>> On Jun 28, 2014, at 6:54, Mario Loreti <mario.loreti at gmail.com> 
>>>>>>> wrote:
>>>>>>>
>>>>>>> I have a Neumann TLM 102 and yes, a Rode NT1A.
>>>>>>>
>>>>>>> Good idea to use a preamp with an SPDIF. I want to change also 
>>>>>>> the preamp in the future, actually I have a TL-Audio Hivory 5051 
>>>>>>> channel strip that works as a preamp, a compressor and EQ, but 
>>>>>>> it's noisy.
>>>>>>>
>>>>>>> I'm oriented on the Universal Audio Solo 610, but I don't know 
>>>>>>> if this has an SPDIF out, probably not. My dream is an Avalon 
>>>>>>> VT737SP, but it's only a dream for now, because of budget reasons.
>>>>>>>
>>>>>>> Has anyone used the UAD 2 plugins?
>>>>>>> Other suggestions?
>>>>>>> Il 28/06/2014 12:29, Patrick Perdue ha scritto:
>>>>>>>> The Deltas are good old cards, but the analog input section has 
>>>>>>>> been far surpassed by lots of other stuff. If you still want to 
>>>>>>>> keep that card around, you could always go the route of finding 
>>>>>>>> a good preamp with sp/dif out, and slaving your Delta's clock 
>>>>>>>> to that, thereby not using the Delta's A/D section for input.
>>>>>>>> No idea if the Roland preamps are good.
>>>>>>>>
>>>>>>>> Of course, things also depend on what mics you are using.
>>>>>>>> If I remember, you have a Neumann TLM103 and a Rode NT1A?
>>>>>>>>
>>>>>>>>> On 6/28/2014 5:34 AM, Mario Loreti wrote:
>>>>>>>>> Hi, I was looking on it.
>>>>>>>>>
>>>>>>>>> Actually I have an M-Audio Delta1010LT, and now I was looking 
>>>>>>>>> at a
>>>>>>>>> better a/d conversion.
>>>>>>>>>
>>>>>>>>> Do you believe that this a / d can be better?
>>>>>>>>> Il 27/06/2014 19:20, Brandon Keith Biggs ha scritto:
>>>>>>>>>> Have you looked at the Roland quad? Dancing Dots sells them.
>>>>>>>>>> thanks,
>>>>>>>>>>
>>>>>>>>>> Brandon Keith Biggs
>>>>>>>>>>
>>>>>>>>>>> On 6/27/2014 4:32 AM, Mario Loreti wrote:
>>>>>>>>>>> I've looked to the focusrite forte. Why you have preferred 
>>>>>>>>>>> the motu
>>>>>>>>>>> to the focusrite?
>>>>>>>>>>> Il 27/06/2014 10:19, Patrick Perdue ha scritto:
>>>>>>>>>>>> Have you looked at Focusrite stuff? Those have good 
>>>>>>>>>>>> preamps, even
>>>>>>>>>>>> their low-end stuff. I had a Saffire Pro14, loved the 
>>>>>>>>>>>> sound, but
>>>>>>>>>>>> ended up replacing it with a MOTU Audio Express.
>>>>>>>>>>>>
>>>>>>>>>>>> Sent from my iPhone
>>>>>>>>>>>>
>>>>>>>>>>>>> On Jun 27, 2014, at 3:34, Mario Loreti 
>>>>>>>>>>>>> <mario.loreti at gmail.com> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>> Hi, I'm looking for a good soundcard with good a/d 
>>>>>>>>>>>>> converters.
>>>>>>>>>>>>>
>>>>>>>>>>>>> I've looked at the RME interfaces, but these have too many 
>>>>>>>>>>>>> inputs
>>>>>>>>>>>>> and outputs, I'am looking for 4 in and 4 out, not 8 or 10.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Can anyone suggest something?
>>>>>>>>>>>>>
>>>>>>>>>>>>> Thanks.
>>>>>>>>>>>>>
>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>> RWP mailing list
>>>>>>>>>>>>> RWP at reaaccess.com
>>>>>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>> RWP mailing list
>>>>>>>>>>>> RWP at reaaccess.com
>>>>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> RWP mailing list
>>>>>>>>>>> RWP at reaaccess.com
>>>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>>> _______________________________________________
>>>>>>>>>> RWP mailing list
>>>>>>>>>> RWP at reaaccess.com
>>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>> _______________________________________________
>>>>>>>>> RWP mailing list
>>>>>>>>> RWP at reaaccess.com
>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>> _______________________________________________
>>>>>>>> RWP mailing list
>>>>>>>> RWP at reaaccess.com
>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>> _______________________________________________
>>>>>>> RWP mailing list
>>>>>>> RWP at reaaccess.com
>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>> _______________________________________________
>>>>>> RWP mailing list
>>>>>> RWP at reaaccess.com
>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>
>>>>> _______________________________________________
>>>>> RWP mailing list
>>>>> RWP at reaaccess.com
>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>> _______________________________________________
>>>> RWP mailing list
>>>> RWP at reaaccess.com
>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>
>>>
>>>
>>> _______________________________________________
>>> RWP mailing list
>>> RWP at reaaccess.com
>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>
>>
>> _______________________________________________
>> RWP mailing list
>> RWP at reaaccess.com
>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>
>
>
> _______________________________________________
> RWP mailing list
> RWP at reaaccess.com
> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com