[RWP] Pianoteq 5 issue (continued.)

[Gianluca Apollaro]

Hi Jim,
In fact, the only way to change the presets on the other instruments is 
to use the N and P keys after Control N and control P. That list will 
always show the d4 ones, or at least it does here.
Hth,
Gianluca
SkypeID: gianluca8815
Il 28/06/2014 16:11, Jim Noseworthy ha scritto:
> Gianluca:
> I did as you say; however, when I press F, I still see the listing for 
> the D4 piano.  Even if I use the JAWS OCR option, click on a k2 piano, 
> hear the piano model actually being initialized, then alt tab away, 
> press f, and tab till I get the listing, it is still the D4 listing.
> Very strange.
> *From:* Gianluca Apollaro <mailto:gianluca.apollaro88 at gmail.com>
> *Sent:* Saturday, June 28, 2014 8:45 AM
> *To:* Reapers Without Peepers <mailto:rwp at reaaccess.com>
> *Subject:* Re: [RWP] Pianoteq 5 issue (continued.)
> Hi Jim,
> Yes, I use jaws and no, you aren't missing anything. By the way The 
> keys you suggested work just fine. In bridge mode the vst has its own 
> window so you can't find the presets there, alt tab away from it, 
> press the letter F again and by tabbing you'll see them again.
> Hth,
> Gianluca.
> SkypeID: gianluca8815
> Il 28/06/2014 11:34, Jim Noseworthy ha scritto:
>> Gianluca:
>> Another issue that I have is that, when in Bridge mode, I can't read 
>> anything with JAWS; it is necessary to perform the JAWS OCR option on 
>> the screen in order to reveal the data.  Am I missing something here?
>> Thanks.
>> *From:* Gianluca Apollaro <mailto:gianluca.apollaro88 at gmail.com>
>> *Sent:* Saturday, June 28, 2014 4:56 AM
>> *To:* Reapers Without Peepers <mailto:rwp at reaaccess.com>
>> *Subject:* Re: [RWP] Pianoteq 5 issue (continued.)
>> Hi Jim  and list,
>> I'm not Roy, but I made some tests.
>> I downloaded the pianoTeq demo and set it up to run bridged, and I 
>> found out that When you load it the first time you need sighted help 
>> to make the welcome message go away. After that, when you are on the 
>> window, CtrlN switches instrument and n changes the various presets. 
>> The problem I'm having is going back to a previous preset or 
>> instrument. CtrlShiftN and shiftN do nothing at all.
>> Hth,
>> Gianluca.
>> SkypeID: gianluca8815
>> Il 27/06/2014 23:41, Jim Noseworthy ha scritto:
>>> Hey Roy:
>>> Did you get the chance to varify whether or not the Pianoteq 5 
>>> instruments are accessible via Reaper without sighted assistance?
>>> Thanks all over the place.
>>>
>>>
>>> _______________________________________________
>>> RWP mailing list
>>> RWP at reaaccess.com
>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>
>> ------------------------------------------------------------------------
>> _______________________________________________
>> RWP mailing list
>> RWP at reaaccess.com
>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>
>>
>> _______________________________________________
>> RWP mailing list
>> RWP at reaaccess.com
>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>
> ------------------------------------------------------------------------
> _______________________________________________
> RWP mailing list
> RWP at reaaccess.com
> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>
>
> _______________________________________________
> RWP mailing list
> RWP at reaaccess.com
> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://bluegrasspals.com/pipermail/rwp/attachments/20140628/58eede3a/attachment.html>