[RWP] Sidechaining in Reaper 4x

Indigo 33indigo at charter.net
Mon Oct 14 06:43:20 EDT 2013 

I just opened Reaper 454, inserted a track, then pressed I for the 
ReaAccess IO dialog.
On any of the lines I tab to that show collapsed, alt+down arrow expands 
them.
On number of channels alt+down arrow goes immediately to the bottom of 
the list, 64 channels.
On sends collapsed, alt+down arrow shows 2 choices:
1, Add New Send; 2, Add Sends to All Tracks.

So, alt+down arrow definitely exposes some new options, or maybe just a 
new approach to old options, in NVDA, not just in jaws.
Indi

On 10/13/2013 10:01 PM, Drew wrote:
> Actually, I think that it is. I didn't test extensively, but that seemed
> to work better under JAWS than NVDA. Strange.
> ----- Original Message ----- From: "Jim Snowbarger"
> <Snowman at SnowmanRadio.com>
> To: "Reapers Without Peepers" <rwp at reaaccess.com>
> Sent: Sunday, October 13, 2013 6:22 PM
> Subject: Re: [RWP] Sidechaining in Reaper 4x
>
>
>> Alt+downArrow definitely helps here.  That is using jaws.  Not sure if
>> that is something jaws is doing, but I didn't think so.
>>
>> ----- Original Message ----- From: "Drew" <amockery at gmail.com>
>> To: "Reapers Without Peepers" <rwp at reaaccess.com>
>> Sent: Saturday, October 12, 2013 10:13 PM
>> Subject: Re: [RWP] Sidechaining in Reaper 4x
>>
>>
>>> Afraid not.
>>> ----- Original Message ----- From: "Jim Snowbarger"
>>> <Snowman at SnowmanRadio.com>
>>> To: "Reapers Without Peepers" <rwp at reaaccess.com>
>>> Sent: Saturday, October 12, 2013 6:42 PM
>>> Subject: Re: [RWP] Sidechaining in Reaper 4x
>>>
>>>
>>>> About the combo box for sends automatically applying after one
>>>> second, does it help to press alt+downArrow first, to open the list
>>>> box?  In some cases, the application will then let you arrow
>>>> throught the choices at leasure, and you can press alt+upArrow to
>>>> close and select once you are finished.
>>>>
>>>> ----- Original Message ----- From: "Indigo" <33indigo at charter.net>
>>>> To: "Reapers Without Peepers" <rwp at reaaccess.com>
>>>> Sent: Saturday, October 12, 2013 6:09 PM
>>>> Subject: Re: [RWP] Sidechaining in Reaper 4x
>>>>
>>>>
>>>>> Yeh, I found shift+i a couple of days ago, and wondered what it would
>>>>> be good for.
>>>>>
>>>>> I just brought up Reaper 454, inserted an empty track, pressed
>>>>> shift+i and got 3 selections at the arrow up/down keys.
>>>>> 1, Sends, radio button, checked.
>>>>> 2, Receives, radio button, checked.
>>>>> 3, Hardware, radio button, checked.
>>>>>
>>>>> While any of those are selected with up/down arrows; I press the
>>>>> tab key and get, for instance:
>>>>> Sends, combo box, collapsed.
>>>>> If I then press alt+down arrow it says expanded.
>>>>> When either of the others are selected, tab; then alt+down arrow
>>>>> works the same.
>>>>> Indi
>>>>> On 10/12/2013 6:18 PM, Gianluca Apollaro wrote:
>>>>>> Hi Patric and list,
>>>>>> while shift+Application key doesn't work in reaper 4, Once you
>>>>>> created
>>>>>> the send, Shift+I works so the channel 1/2=3/4 can be done as it's
>>>>>> done
>>>>>> in reaper 3.
>>>>>> Hth,
>>>>>> Gianluca from Italy
>>>>>> SkypeID. gianluca8815
>>>>>> Il 12/10/2013 23:49, Patrick Perdue ha scritto:
>>>>>>> OK. So, after looking at Reaper 3.78's native track routing matrix,
>>>>>>> here's what I've found. I don't know if it's the same in 4.x.
>>>>>>>
>>>>>>> Once a send has been created from source (trigger) to destination
>>>>>>> (processor,) use your screen reader of choice's review stuff to
>>>>>>> find a
>>>>>>> line that says: "Audio:1/2 =>1/2" It should be below things like
>>>>>>> delete, post-fade, post-pan, etc.
>>>>>>> Now, change the latter half of that from >=1/2 to >=3/4 by
>>>>>>> clicking on
>>>>>>> >=1/2. A menu will appear.
>>>>>>> Now, if your destination track has been set up with four
>>>>>>> channels, and
>>>>>>> your source track is sending to channels 3/4 of destination, and
>>>>>>> ReaComp (or whatever compressor you're using for keyed input) is
>>>>>>> receiving from 3/4 rather than 1/2, you're good, barring the obvious
>>>>>>> bit of adjusting compression parameters to get your desired effect.
>>>>>>>
>>>>>>> On 10/12/2013 5:34 PM, Scott Chesworth wrote:
>>>>>>>> I must be missing something obvious. Seems like if I set this up
>>>>>>>> with
>>>>>>>> sends, both signals will go into the same input of the compressor.
>>>>>>>> Granted, that'll sound different than if I hadn't done it, but
>>>>>>>> that's
>>>>>>>> not the same as sending that secondary signal into the key input of
>>>>>>>> the compressor or whatever they call it in plugins nowadays so that
>>>>>>>> the compressor is reacting to it as a separate source is it? Been a
>>>>>>>> while since I actually patched in hardware, so forgive the
>>>>>>>> potentially
>>>>>>>> rookie question.
>>>>>>>>
>>>>>>>> Cheers
>>>>>>>>
>>>>>>>> Scott
>>>>>>>>
>>>>>>>> On 10/12/13, Drew <amockery at gmail.com> wrote:
>>>>>>>>> You have to press i to view the track IO. Tab to the "sends: add
>>>>>>>>> new" combo
>>>>>>>>>
>>>>>>>>> box and press the down arrow. From there it's pretty much the same
>>>>>>>>> as in
>>>>>>>>> reaper 3. The only part I can't figure out is how to change where
>>>>>>>>> that send
>>>>>>>>>
>>>>>>>>> goes; it defaults to the top track or the second track if I'm
>>>>>>>>> already on the
>>>>>>>>>
>>>>>>>>> top track.
>>>>>>>>> ----- Original Message -----
>>>>>>>>> From: "Scott Chesworth" <scottchesworth at gmail.com>
>>>>>>>>> To: "Reapers Without Peepers" <rwp at reaaccess.com>
>>>>>>>>> Sent: Saturday, October 12, 2013 11:05 AM
>>>>>>>>> Subject: [RWP] Sidechaining in Reaper 4x
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>> Does anyone have a workflow for getting this done in Reaper 4
>>>>>>>>>> with
>>>>>>>>>> NVDA? Struggling to get some weird arty atmospheric loops to
>>>>>>>>>> sit in
>>>>>>>>>> the mix here, and I'm thinking some ducking triggered by the
>>>>>>>>>> drum bus
>>>>>>>>>> might tie things together a bit better.
>>>>>>>>>>
>>>>>>>>>> Any tips appreciated...
>>>>>>>>>>
>>>>>>>>>> Scott
>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> RWP mailing list
>>>>>>>>>> RWP at reaaccess.com
>>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> RWP mailing list
>>>>>>>>> RWP at reaaccess.com
>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>>
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> RWP mailing list
>>>>>>>> RWP at reaaccess.com
>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> RWP mailing list
>>>>>>> RWP at reaaccess.com
>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> RWP mailing list
>>>>>> RWP at reaaccess.com
>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>
>>>>> _______________________________________________
>>>>> RWP mailing list
>>>>> RWP at reaaccess.com
>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> RWP mailing list
>>>> RWP at reaaccess.com
>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>
>>>
>>>
>>> _______________________________________________
>>> RWP mailing list
>>> RWP at reaaccess.com
>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>
>>
>>
>>
>> _______________________________________________
>> RWP mailing list
>> RWP at reaaccess.com
>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>
>
>
> _______________________________________________
> RWP mailing list
> RWP at reaaccess.com
> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com

More information about the Rwp mailing list