[RWP] Sidechaining in Reaper 4x

[Jim Snowbarger]

About the combo box for sends automatically applying after one second, does 
it help to press alt+downArrow first, to open the list box?  In some cases, 
the application will then let you arrow throught the choices at leasure, and 
you can press alt+upArrow to close and select once you are finished.

----- Original Message ----- 
From: "Indigo" <33indigo at charter.net>
To: "Reapers Without Peepers" <rwp at reaaccess.com>
Sent: Saturday, October 12, 2013 6:09 PM
Subject: Re: [RWP] Sidechaining in Reaper 4x


> Yeh, I found shift+i a couple of days ago, and wondered what it would
> be good for.
>
> I just brought up Reaper 454, inserted an empty track, pressed shift+i and 
> got 3 selections at the arrow up/down keys.
> 1, Sends, radio button, checked.
> 2, Receives, radio button, checked.
> 3, Hardware, radio button, checked.
>
> While any of those are selected with up/down arrows; I press the tab key 
> and get, for instance:
> Sends, combo box, collapsed.
> If I then press alt+down arrow it says expanded.
> When either of the others are selected, tab; then alt+down arrow works the 
> same.
> Indi
> On 10/12/2013 6:18 PM, Gianluca Apollaro wrote:
>> Hi Patric and list,
>> while shift+Application key doesn't work in reaper 4, Once you created
>> the send, Shift+I works so the channel 1/2=3/4 can be done as it's done
>> in reaper 3.
>> Hth,
>> Gianluca from Italy
>> SkypeID. gianluca8815
>> Il 12/10/2013 23:49, Patrick Perdue ha scritto:
>>> OK. So, after looking at Reaper 3.78's native track routing matrix,
>>> here's what I've found. I don't know if it's the same in 4.x.
>>>
>>> Once a send has been created from source (trigger) to destination
>>> (processor,) use your screen reader of choice's review stuff to find a
>>> line that says: "Audio:1/2 =>1/2" It should be below things like
>>> delete, post-fade, post-pan, etc.
>>> Now, change the latter half of that from >=1/2 to >=3/4 by clicking on
>>> >=1/2. A menu will appear.
>>> Now, if your destination track has been set up with four channels, and
>>> your source track is sending to channels 3/4 of destination, and
>>> ReaComp (or whatever compressor you're using for keyed input) is
>>> receiving from 3/4 rather than 1/2, you're good, barring the obvious
>>> bit of adjusting compression parameters to get your desired effect.
>>>
>>> On 10/12/2013 5:34 PM, Scott Chesworth wrote:
>>>> I must be missing something obvious. Seems like if I set this up with
>>>> sends, both signals will go into the same input of the compressor.
>>>> Granted, that'll sound different than if I hadn't done it, but that's
>>>> not the same as sending that secondary signal into the key input of
>>>> the compressor or whatever they call it in plugins nowadays so that
>>>> the compressor is reacting to it as a separate source is it? Been a
>>>> while since I actually patched in hardware, so forgive the potentially
>>>> rookie question.
>>>>
>>>> Cheers
>>>>
>>>> Scott
>>>>
>>>> On 10/12/13, Drew <amockery at gmail.com> wrote:
>>>>> You have to press i to view the track IO. Tab to the "sends: add
>>>>> new" combo
>>>>>
>>>>> box and press the down arrow. From there it's pretty much the same
>>>>> as in
>>>>> reaper 3. The only part I can't figure out is how to change where
>>>>> that send
>>>>>
>>>>> goes; it defaults to the top track or the second track if I'm
>>>>> already on the
>>>>>
>>>>> top track.
>>>>> ----- Original Message -----
>>>>> From: "Scott Chesworth" <scottchesworth at gmail.com>
>>>>> To: "Reapers Without Peepers" <rwp at reaaccess.com>
>>>>> Sent: Saturday, October 12, 2013 11:05 AM
>>>>> Subject: [RWP] Sidechaining in Reaper 4x
>>>>>
>>>>>
>>>>>> Does anyone have a workflow for getting this done in Reaper 4 with
>>>>>> NVDA? Struggling to get some weird arty atmospheric loops to sit in
>>>>>> the mix here, and I'm thinking some ducking triggered by the drum bus
>>>>>> might tie things together a bit better.
>>>>>>
>>>>>> Any tips appreciated...
>>>>>>
>>>>>> Scott
>>>>>>
>>>>>> _______________________________________________
>>>>>> RWP mailing list
>>>>>> RWP at reaaccess.com
>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> RWP mailing list
>>>>> RWP at reaaccess.com
>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>
>>>>
>>>> _______________________________________________
>>>> RWP mailing list
>>>> RWP at reaaccess.com
>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>
>>>
>>>
>>> _______________________________________________
>>> RWP mailing list
>>> RWP at reaaccess.com
>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>
>>
>>
>> _______________________________________________
>> RWP mailing list
>> RWP at reaaccess.com
>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>
> _______________________________________________
> RWP mailing list
> RWP at reaaccess.com
> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>