[RWP] Routing Tracks to master track

[Gianluca Apollaro]

/I got my p/roblem solved, the action didn't somehow have a key assigned 
and that's wheird... but In reaper 4 ctrl+shift+I works the same, I see 
the same dialog for the i/o access...
Best regards,
Gianluca from Italy
SkypeID: gianluca8815
Il 30/05/2013 01:29, Patrick Perdue ha scritto:
> hi:
>
> I want to route channels 1/2 of master track to channels 17/18 of my 
> audio interface. This is how I work at the moment. I have done this 
> using the ReaAccess control+shift+I key combination, routing for 
> master track, and changing the single hardware output from 1/2 > 1/2 
> to 1/2> 17/18. I want access to all 18 returns of my audio interface, 
> so changing it globally in preferences/audio/devices isn't an option. 
> I've never quite figured out how to get to the master track with 
> anything that doesn't have an off-screen model, I.E. NVDA, which is 
> what I use primarily in Windows, without using the ReaAccess stuff. 
> For example, I was doing a project a few months ago wherein I wanted 
> to setup multiple hardware outputs on the master track, so that 
> channel 1/2 went to 13/14, and channels 3/4 went to 15/16, but without 
> being able to get to the master track on-screen, I couldn't add a 
> second hardware output to master track. Once there, I'm sure I could 
> have accessed it using the ReaAccess master track I/O dialogue.
>
> On 5/29/2013 7:15 PM, Gianluca Apollaro wrote:
>> Hi Patrick,
>> Can you explain better what you want to do and how you do it in reaper
>> 3.78?
>> Indigo, the menu with ctrl+applications shows the inster new track and
>> insert virtual istrument on a new track.
>> Best regards,
>> Gianluca.
>> SkypeID: gianluca8815
>>
>> Il 29/05/2013 23:12, Patrick Perdue ha scritto:
>>> You can do a lot of tthat stuff with Reaper's UI, but what about stuff
>>> like changing the hardware output on master bus routing channels of
>>> one track to a different pair of channels on another track, like 1/2
>>> to 3/4 for side-chaining, etc?
>>>
>>> On May 29, 2013, at 3:54 PM, "Chris Belle" <cb1963 at sbcglobal.net> 
>>> wrote:
>>>
>>>> Hey patrick little buddy, with the giant brain, I think I fingered it
>>>> out 'grin'.
>>>>
>>>> It's an nvda thing.
>>>>
>>>> I noticed when I hit i in the track view with nvda there were some
>>>> blank spots, where nvda wouldn't speak anything, but with window-eyes
>>>> everything showed up fine.
>>>>
>>>> I was able to change track outputs, and the master output.
>>>>
>>>> So perhaps you could grab a demo of window-eyes to change these
>>>> things and use good old nvda for everything else.
>>>>
>>>> And with the vagaries of email I could still be missing what's
>>>> missing, but I think I know what your talking about.
>>>>
>>>> I'm a reaper greenee though 'grin'.
>>>>
>>>>
>>>>
>>>> ----- Original Message ----- From: "Patrick Perdue"
>>>> <patrick at pdaudio.net>
>>>> To: "Reapers Without Peepers" <rwp at reaaccess.com>
>>>> Sent: Sunday, May 19, 2013 9:37 PM
>>>> Subject: Re: [RWP] Routing Tracks to master track
>>>>
>>>>
>>>>> ReaAccess won't show the master track in the standard track view, at
>>>>> least not in 3.7X. I don't think it does in 4.x, either. I believe
>>>>> it's actually visible on-screen somewhere if the option for showing
>>>>> master track is enabled somewhere in Reaper's preferences, or
>>>>> perhaps the view menu. I can't remember, since it makes no
>>>>> difference to me.
>>>>>
>>>>> This is one of the many reasons I can't use 4.x in a production
>>>>> environment, since I need to change the master track's output from
>>>>> channels 1/2 to channels 17/18 on my audio interface, and ReaAccess
>>>>> handling is broken in a way that makes this completely useless. It
>>>>> is possible, and very easy, to do this using 3.78 and ReaAccess.
>>>>> Yes, I'm aware that I could change the global output in system
>>>>> preferences, but then I would no longer have access to the first 16
>>>>> outputs of my audio interface, which isn't acceptable. Anyway,
>>>>> that's another topic entirely.
>>>>>
>>>>> On 5/19/2013 10:32 PM, Alexander Westphal wrote:
>>>>>> Okay, but how do I make this master track visible? With Up and Down
>>>>>> arrow I only see the usual tracks.
>>>>>>
>>>>>> _______________________________________________
>>>>>> RWP mailing list
>>>>>> RWP at reaaccess.com
>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>
>>>>> _______________________________________________
>>>>> RWP mailing list
>>>>> RWP at reaaccess.com
>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>
>>>> _______________________________________________
>>>> RWP mailing list
>>>> RWP at reaaccess.com
>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>
>>> _______________________________________________
>>> RWP mailing list
>>> RWP at reaaccess.com
>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>> .
>>>
>>
>>
>> _______________________________________________
>> RWP mailing list
>> RWP at reaaccess.com
>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>
>
> _______________________________________________
> RWP mailing list
> RWP at reaaccess.com
> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://bluegrasspals.com/pipermail/rwp/attachments/20130530/e7a9706d/attachment.html>