[RWP] Routing Tracks to master track

[Indigo]

In Reaper, action 65 is Set All Tracks Automation Mode to Write, and Set 
all tracks Automation Mode to read is a little below that.
Besides write you also have touch, latch and trim.
Instead of set all tracks automation mode, while a track is selected 
with up and down arrows, tab to automation mode and select with arrows 
on a per track basis.
Press enter to keep selection.
Indi

On 5/21/2013 6:16 PM, Alexander Westphal wrote:
> Hi Patrick!
>
> Well, Sonar is more comfortable in these things. There you can say
> "Write Automation" and it will do it. Okay, this is a very simple
> explanation, but it is as simple as can be. You go to the track or bus,
> go to the item you want to automate, e.g. volume or pan, press
> contextmenu, look for "Automation Write" and press enter, press CTRL+R
> for Automation Record and change the value while playing with plus and
> minus or - if assigned - move the slider on your controller.
>
> With the Master Bus it is also very simple, because it is available in a
> "Bus Panel". In most cases all audio and softsynth tracks are routed to
> this. Hope I understood your message right and you needed this
> explanation.*grin*