[RWP] Configuring Reaper with Korg Nanokontrol2 control surface

[Gordon Kent]

It may have something with the korg being in jump mode which would make it 
only move when the control reaches the current setting.  I have the same 
issue with my motif xf for some reason, and it doesn't matter if I’m using 
reaper or sonar.
Gord

-----Original Message----- 
From: Patrick Perdue
Sent: Thursday, March 21, 2013 11:50 AM
To: Reapers Without Peepers
Subject: Re: [RWP] Configuring Reaper with Korg Nanokontrol2 control surface

Hi Gord:

I had no problem enabling the input for control only, even with NVDA,
but the part that got me was the control surface dialogue itself. I did
eventually find the midi in/midi out thing with NVDA flat review, and
made it work. Now I just have to figure out how to set min and max
values, as I want the top of the fader to be 0DB, not +24, and figure
out why the knobs don't always quite line up to what I think they
should. For example, sometimes, the knob for controlling pan, when
center, can be anywhere from 75 percent left to 50 percent right. Going
from one extreme to the other and back again changes things again. I
mostly want to use this thing for controlling effects anyway.

On 3/21/2013 12:50 AM, Gordon Kent wrote:
> Patrick:
> When you want to use a device as a control surface, you need to enable
> it only for control.  Unfortunately the only way I've been able to do
> that is to right the mouse to the input field in the control surafe
> dialog and right click, which brings up the menu where you enable the
> input or enable it only for control.
> Gord
>
> -----Original Message----- From: Patrick Perdue
> Sent: Wednesday, March 20, 2013 3:23 PM
> To: Reapers Without Peepers
> Subject: [RWP] Configuring Reaper with Korg Nanokontrol2 control surface
>
> Hi all:
>
> I just got a Korg Nanokontrol2, and I'm trying to get it set up to
> control tracks, transport, etc. with Reaper. I have successfully used it
> to assign controls to effects parameters, but I can't figure out how
> you're supposed to assign a newly added control surface to a set of
> ports. I've put the Nanokontrol in Sonar mode, I.E. Mackie Universal,
> and added the Mackie Universal control surface in preferences/control
> surfaces, enabled input for control surfaces for the NanoKontrol midi
> port, but... now what? I'm sure I'm missing something extremely obvious
> here. There is nothing in the control surface dialogue to suggest that
> any given control surface can be assigned to a port, only the type of
> control surface can be selected.
>
> _______________________________________________
> RWP mailing list
> RWP at reaaccess.com
> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>
> _______________________________________________
> RWP mailing list
> RWP at reaaccess.com
> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com


_______________________________________________
RWP mailing list
RWP at reaaccess.com
http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com