[RWP] Assigning faders with plugin parameters

[Indigo]

I notice that when assigning a control under Param, I don't hear 
confirmation that the controller has been assigned to the parameter; 
like you get when assigning a control to an action.
You just trust Reaper; go to your tab key and press it to get to OK.
On the way tabbing down to OK you find a selection to set the control to 
absolute, or 2 other relative settings.
The absolute setting is for a pot type control that doesn't rotate 
continuously, but stops turning when you get to a certain angle, also 
for a fader or slider.
The relative settings are intended for endless rotary controls.
The next tab down should be a checkbox for Soft TakeOver.
Put a checkmark on that with your spacebar, so your control won't cause 
a jump in the parameter's value when you rotate the control.

Then tab down to OK and press enter.
You can now test the control and hear if it is assigned to the parameter.
I've never assigned pitchBend, except from a joystick, and remember that 
on certain control surfaces the controls can't transmit pitchBend, but 
don't know if that is a problem for the UC33 or not
Reaper's use of OSC should accept any control for any function 
whatsoever,  the manual seems to say.
If at first you don't succeed, get a bigger hammer! smile.
Indi




On 6/19/2013 8:40 AM, Alexander Westphal wrote:
> Hello!
>
> I now made it! I assign two of the sliders from my UC-33 to Set
> selectedTrack's volume and pan. Now I now wanted to assign one slider
> for a pitch plugin. In the FX window I klicked "Param" and wend to
> "Learn", then I chose the parameter, in my case "Adjust pitch sents" and
> moved the controller, but when I do this, nothing happens. what do I
> have to set up accept the parameter I want to controll?