[RWP] dynamic split (transient sensetivity options)isnotaccessible?

[Scott Chesworth]

Eak, I did say gesture didn't I. Scratch that, too much time spent on
touch screens! What I actually meant was a pass through keystroke, so
NVDA+F2 or JAWS3.

Scott

On 7/27/13, Jim Snowbarger <Snowman at snowmanradio.com> wrote:
> Nope,  good idea, but doesn't help.
> You can turn off reaper with control+shift+f12, and the arrow keys still
> control scrubbing and dont' get sent to the control
> Since the screen reader itself is not in the way, the screen reader
> passThrough doesn't help either.
> It's a reaper issue.  Possibly, sending a command directly to the object
> itself using a script would work.  But, I don't know the messages you need
> to send to do that.
> I'll poke around at see if I can find out.  But,  it doesn't look good at
> the moment.
>
> ----- Original Message -----
> From: "hadi" <hadirezaei at gmx.com>
> To: "Reapers Without Peepers" <rwp at reaaccess.com>
> Sent: Saturday, July 27, 2013 5:00 PM
> Subject: Re: [RWP] dynamic split (transient sensetivity
> options)isnotaccessible?
>
>
>> Hi,
>> @scott, what do you mean by passing through gesture? i didn't get you at
>> all.
>> @james, well, i should maybe go on with hotspot clicker then. i'm not sure
>>
>> though, i don't know scripting.
>> @Adrian. no worries at all.
>>
>> Also, with 50% sensetivity it misses alot of stuff for me... i mean it's
>> like 70% correct, so i need to tune that up abit.
>>
>>
>> On 7/28/2013 2:03 AM, Scott Chesworth wrote:
>>> Seeing as the arrows aren't assigned to scrub without ReaAccess being
>>> involved, I guess this is ReaAccess overriding stuff somehow. What
>>> happens if you do a pass through gesture when focused on the slider?
>>> Not a solution to make big changes really, but I'm interested whether
>>> passing through the ReaAccess JAWS script makes any difference to the
>>> behaviour.
>>>
>>> FWIW, that slider at its default value has worked a treat on drums
>>> here, the few times I've used it.
>>>
>>> Scott
>>>
>>> On 7/27/13, Jim Snowbarger <Snowman at snowmanradio.com> wrote:
>>>> The problem with that slider is that it does not respond to the arrow
>>>> keys.
>>>>
>>>> I am running reaper 4.4 at the moment.
>>>> JAWS can read the slider value just fine.  But, the arrow keys actually
>>>> scrub playback, even though focus is on the slider.  Apparently, The
>>>> only
>>>> way to operate that slider is via the mouse.   HotSpotClicker time< I
>>>> guess.
>>>>
>>>>
>>>> ----- Original Message -----
>>>> From: "hadi" <hadirezaei at gmx.com>
>>>> To: "Reapers Without Peepers" <rwp at reaaccess.com>
>>>> Sent: Friday, July 26, 2013 5:38 AM
>>>> Subject: Re: [RWP] dynamic split (transient sensetivity options)
>>>> isnotaccessible?
>>>>
>>>>
>>>>> Hi,
>>>>>
>>>>> first select an item in a track
>>>>> press applications
>>>>> go to item processing
>>>>> select dynamic split item...
>>>>> then, do a shift tab to land at the button "set transient sensetivity"
>>>>> when you press enter on it, you cannot ajust the sensetivity
>>>>> and that window is inaccessible sadly
>>>>> On 7/26/2013 6:13 AM, Jim Snowbarger wrote:
>>>>>> I am not familiar with that tool.  But, I do use jaws, and am pretty
>>>>>> familiar with it.
>>>>>> Before you throw the baby out with the bath water, tell me how to get
>>>>>>
>>>>>> to
>>>>>>
>>>>>> the window you are working with, and I'll see if I can figure out what
>>>>>>
>>>>>> is
>>>>>>
>>>>>> going on from the jaws perspective.
>>>>>>
>>>>>> ----- Original Message ----- From: "hadi" <hadirezaei at gmx.com>
>>>>>> To: <RWP at reaaccess.com>
>>>>>> Sent: Thursday, July 25, 2013 5:57 AM
>>>>>> Subject: [RWP] dynamic split (transient sensetivity options) is
>>>>>> notaccessible?
>>>>>>
>>>>>>
>>>>>>> Hello guys,
>>>>>>>
>>>>>>> I'm trying to check out the dynamic split tool of reaper, which it
>>>>>>> detects the transients and splits the items automaticly.
>>>>>>> i open the dynamic split window, (select item, item processing;
>>>>>>> dynamic
>>>>>>>
>>>>>>> split item...)
>>>>>>> then i do a shift tab which says (set transient sensitivity)
>>>>>>> i need to work with that window to  bring up the sensetivity so it
>>>>>>> could
>>>>>>>
>>>>>>> detect  weak  transients, but once i open that window jaws goes
>>>>>>> crasy
>>>>>>> and pressing tab  focuses on your track buttons, ignoring the
>>>>>>> dynamic
>>>>>>> split window and set sensetivity window.
>>>>>>> i tried to bring the focus to the set sensetivity window by jaws
>>>>>>> cursor,
>>>>>>>
>>>>>>> but no luck.
>>>>>>>
>>>>>>> Does anyone got a solution for this?
>>>>>>>
>>>>>>> Cheers
>>>>>>> hadi
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> RWP mailing list
>>>>>>> RWP at reaaccess.com
>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> RWP mailing list
>>>>>> RWP at reaaccess.com
>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>
>>>>> _______________________________________________
>>>>> RWP mailing list
>>>>> RWP at reaaccess.com
>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> RWP mailing list
>>>> RWP at reaaccess.com
>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>
>>> _______________________________________________
>>> RWP mailing list
>>> RWP at reaaccess.com
>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>
>>
>> _______________________________________________
>> RWP mailing list
>> RWP at reaaccess.com
>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>
>
>
>
> _______________________________________________
> RWP mailing list
> RWP at reaaccess.com
> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>