[RWP] dynamic split (transient sensetivity options) is notaccessible?

[adriandavids404 at gmail.com]

Hadi,

Maybe the following could help.

After selecting the Item with Control plus left/right arrows,
Press Control plus Alt plus Shift plus T to bring up the particular Window within the Dynamic split dialogue box
Next, route Jaws to PC
Now, read by word till you get to, Use Zero crossings checkbox and check or uncheck
Much of the options should now be availible at your Tab key

Hope this helps.
Let us know how you get on.

Adrian
Sent via my BlackBerry from Vodacom - let your email find you!

-----Original Message-----
From: hadi <hadirezaei at gmx.com>
Sender: "RWP" <rwp-bounces at reaaccess.com>
Date: Fri, 26 Jul 2013 15:24:32 
To: Reapers Without Peepers<rwp at reaaccess.com>
Reply-To: Reapers Without Peepers <rwp at reaaccess.com>
Subject: Re: [RWP] dynamic split (transient sensetivity options)
	is	notaccessible?

4.402, the latest version

On 7/26/2013 2:12 PM, adriandavids404 at gmail.com wrote:
> Hadi,
>
> Which version of Reaper are you using?
>
> I have found that the Window presents itself differently between version 3.78 and 4.42.
>
> Adrian
> Sent via my BlackBerry from Vodacom - let your email find you!
>
> -----Original Message-----
> From: hadi <hadirezaei at gmx.com>
> Sender: "RWP" <rwp-bounces at reaaccess.com>
> Date: Fri, 26 Jul 2013 15:08:21
> To: Reapers Without Peepers<rwp at reaaccess.com>
> Reply-To: Reapers Without Peepers <rwp at reaaccess.com>
> Subject: Re: [RWP] dynamic split (transient sensetivity options) is
> 	notaccessible?
>
> Hi,
>
> first select an item in a track
> press applications
> go to item processing
> select dynamic split item...
> then, do a shift tab to land at the button "set transient sensetivity"
> when you press enter on it, you cannot ajust the sensetivity
> and that window is inaccessible sadly
> On 7/26/2013 6:13 AM, Jim Snowbarger wrote:
>> I am not familiar with that tool.  But, I do use jaws, and am pretty
>> familiar with it.
>> Before you throw the baby out with the bath water, tell me how to get
>> to the window you are working with, and I'll see if I can figure out
>> what is going on from the jaws perspective.
>>
>> ----- Original Message ----- From: "hadi" <hadirezaei at gmx.com>
>> To: <RWP at reaaccess.com>
>> Sent: Thursday, July 25, 2013 5:57 AM
>> Subject: [RWP] dynamic split (transient sensetivity options) is
>> notaccessible?
>>
>>
>>> Hello guys,
>>>
>>> I'm trying to check out the dynamic split tool of reaper, which it
>>> detects the transients and splits the items automaticly.
>>> i open the dynamic split window, (select item, item processing;
>>> dynamic split item...)
>>> then i do a shift tab which says (set transient sensitivity)
>>> i need to work with that window to  bring up the sensetivity so it
>>> could detect  weak  transients, but once i open that window jaws goes
>>> crasy and pressing tab  focuses on your track buttons, ignoring the
>>> dynamic split window and set sensetivity window.
>>> i tried to bring the focus to the set sensetivity window by jaws
>>> cursor, but no luck.
>>>
>>> Does anyone got a solution for this?
>>>
>>> Cheers
>>> hadi
>>>
>>> _______________________________________________
>>> RWP mailing list
>>> RWP at reaaccess.com
>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>
>>
>>
>> _______________________________________________
>> RWP mailing list
>> RWP at reaaccess.com
>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>
> _______________________________________________
> RWP mailing list
> RWP at reaaccess.com
> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
> _______________________________________________
> RWP mailing list
> RWP at reaaccess.com
> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com


_______________________________________________
RWP mailing list
RWP at reaaccess.com
http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com