[RWP] Changing Banks and Patches in Reaper was Re: Testing

Thu Jul 4 03:38:14 EDT 2013

Indigo,

Thank you very much. You were spot on as usual. I managed to get to the load bank/patch dialogue this morning.

NVDA has been my primary screenreader for a while now, so you advised me well. Thank you.

Adrian
Sent via my BlackBerry from Vodacom - let your email find you!

-----Original Message-----
From: Indigo <33indigo at charter.net>
Sender: "RWP" <rwp-bounces at reaaccess.com>
Date: Wed, 03 Jul 2013 23:21:00 
To: Reapers Without Peepers<rwp at reaaccess.com>
Reply-To: Reapers Without Peepers <rwp at reaaccess.com>
Subject: Re: [RWP] Changing Banks and Patches in Reaper was Re:  Testing

I just now looked at Reaper 64bit using NVDA, and with a VST plug 
inserted, in Reaper's FX chaining page, as you tab down you firsthear 
List 1, with the name of the plug;
then MultiList;
then dot dot dot button;
then a line with parameters, or names of presets;
then the unlabeled button.
If you press the numberPad insert key and the numberPad enter, in NVDA 
it pops up the Reaper Load/save bank/preset dialog, which you arrow 
through, and can navigate to where the plug stores banks or presets 
somewhere inside its folder.
Exactly where a particular plug stores its presets or banks depends on 
the plug.
Sometimes there is a subfolder named banks, or a subfolder named presets.
As to how to get that unlabeled button you tab to in FX Chaining page to 
display the bank/preset dialog in Jaws, I can't say, since I almost 
always use NVDA now.

I just tried clicking enter on the unlabeled button, no reaction, tried 
pressing the applications key for a right click, no reaction, tried 
routing focus to the numberPad and pressing right click, no reaction, 
also no reaction from routing to numberPad and left clicking.
When I pressed NVDA key plus numPad enter the dialog appeared immediately.
Using Jaws, just experiment to find a way to get the Bank/preset 
Load/save dialog to appear at the arro keys.

I am learning so many moves in Reaper that work best in NVDA, with its 
object navigation; I can't recommend it enough.

Indi
On 7/3/2013 4:25 PM, adriandavids404 at gmail.com wrote:
> Indigo,
>
> Thank you very much. You have been of great help, I appreciate it.
>
> I will try what you suggested, thank you once again.
>
> Adrian
> Sent via my BlackBerry from Vodacom - let your email find you!
>
> -----Original Message-----
> From: Indigo <33indigo at charter.net>
> Sender: "RWP" <rwp-bounces at reaaccess.com>
> Date: Wed, 03 Jul 2013 17:20:41
> To: Reapers Without Peepers<rwp at reaaccess.com>
> Reply-To: Reapers Without Peepers <rwp at reaaccess.com>
> Subject: Re: [RWP] Changing Banks and Patches in Reaper was Re:  Testing
>
> It depends on the VST plug you have loaded.
> Some display their list of patches or presets on the FX Chaining page.
> Others respond to program change messages sent from your midi keyboard.
> Just press or twirl whatever changes the internal sounds in your keyboard.
> If you're lucky, the preset in the plug will change.
> Banks are another story.
> Maybe you can transmit bank change messages from your midi keyboard.
> Or, you might bring up the Reaper preset and bank load/save dialog and
> navigate to where the plug is stored, and if there are banks in its
> folder, you can load a new bank of presets.
> Sorry, I'm not at Reaper this second, maybe someone else can tell you
> how to locate the unlabeled button to click on in Reaper's FX Chaining
> page to bring up the bank/preset load/save dialog.
> Indi
>
> On 7/3/2013 3:16 PM, adriandavids404 at gmail.com wrote:
>> Hi All,
>>
>> How do I go about changing Banks and Patches after an midi instrument has been loaded? I am using Reaper V 4.402.
>>
>> Thank you for any help.
>>
>> Adrian
>> Sent via my BlackBerry from Vodacom - let your email find you!
>>
>> -----Original Message-----
>> From: Sean Terry <chipper0182 at gmail.com>
>> Sender: "RWP" <rwp-bounces at reaaccess.com>
>> Date: Wed, 3 Jul 2013 15:00:23
>> To: Reapers Without Peepers<rwp at reaaccess.com>
>> Reply-To: Reapers Without Peepers <rwp at reaaccess.com>
>> Subject: Re: [RWP] Testing
>>
>> Just making sure I can mail the list.
>>
>> 	Have a wonderful day.
>> 			From: Christopher (Sean) Terry
>>
>> On Jul 3, 2013, at 1:19 PM, לאה מויאל <leahefrat at gmail.com> wrote:
>>
>>> what are you tring to test and why?
>>> have a very good reaper work efrat
>>> ----- Original Message ----- From: "Sean Terry" <chipper0182 at gmail.com>
>>> To: "Reapers Without Peepers" <rwp at reaaccess.com>
>>> Sent: Wednesday, July 03, 2013 9:07 PM
>>> Subject: Re: [RWP] Testing
>>>
>>>
>>>> This just a test.
>>>> Have a wonderful day.
>>>> From: Christopher (Sean) Terry
>>>> On Jul 3, 2013, at 10:13 AM, Matt Turner <meturner2214 at gmail.com> wrote:
>>>>> _______________________________________________
>>>>> RWP mailing list
>>>>> RWP at reaaccess.com
>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>> _______________________________________________
>>>> RWP mailing list
>>>> RWP at reaaccess.com
>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>
>>> _______________________________________________
>>> RWP mailing list
>>> RWP at reaaccess.com
>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>
>> _______________________________________________
>> RWP mailing list
>> RWP at reaaccess.com
>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>> _______________________________________________
>> RWP mailing list
>> RWP at reaaccess.com
>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>
>
> _______________________________________________
> RWP mailing list
> RWP at reaaccess.com
> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
> _______________________________________________
> RWP mailing list
> RWP at reaaccess.com
> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>

_______________________________________________
RWP mailing list
RWP at reaaccess.com
http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com