[RWP] Behringer BCR2000 question

[Goldfinga Productions]

That was not a typo. I really meant BCR 2000. Not the Fater controller, but the rotary control.
On Aug 27, 2013, at 6:37 PM, Indigo <33indigo at charter.net> wrote:

> With the BCF2000  off, hold mode button 1 for 3 or 4 seconds as you press the power switch to turn on power.
> You get the original mode.
> Now, whether that erases all changes made in other modes I don't know.
> I think the original Behringer mode is interesting.
> In that mode I was able to control several parameters of plugs like Massive, FM8 and others that I had no control of.
> However, the BCF2000 is nothing compared to the hundreds of plug parameters you get with the Novation Nocturn AutoMap, only about $99.
> The Nocturn and AutoMap is not a cinch to set up, requires some sighted help to scan new plugs.
> Instead of a couple of parameters controlled, I get 27 pages of parameters in Alchemy, each page having 8 endless knobs and 8 buttons at the little Nocturn hardware box.
> NVDA reads a transparent screen overlay with info as to which page, which plug and which parameters, with number settings for the parameter, and the AutoMap doesn't disturb Reaper even the slightest bit.
> You end up with twice as many plugs in your folders after scanning with AutoMap, but each scanned plug has the word AutoMap in its name, so no confusion; plus you can still insert the unscanned version of the plug if you want.
> AutoMap still doesn't give you total access, neither will the BCF2000.
> I don't know what program will get rid of custom controls and replace them with ones a screenreader can recognize, or make sense of totally visual screen graphics; or  provide standard Microsoft menus, edit fields, lists, etcetera.
> Having every parameter of a plug available at a knob or a button is intoxicating, though, when we've been shut out for so long.
> Of course, Sonar and Reaper expose a plug's parameters, if you want to tediously type in numbers for each parameter, but nothing beats twisting a knob and hearing instant results.
> When I get back on my feet, I can maybe help someone with Nocturn and Automap.
> Indi
> 
> On 8/27/2013 5:25 PM, Goldfinga Productions wrote:
>> Hello lists. The reason I am cross posting onto lists is because between these lists there is bound to be someone who can help me with this issue.
>> And the cool part is, I am not off topic on either list.
>> Anyway down to business.
>>  is there anyone that knows how to reset the BCR 2000 to its original state?
>> I don't know what I could have gotten into, but I have set up some controller assignments using it, and they don't seem to be working.
>> They worked for a while, and I think I may have gotten into some mode that I don't know about.
>> I've tried looking on forums, but the only thing I was able to find was how to upgrade the firmware. I'm really not digging that hole set up either. Apparently you have to use midi instead of the onboard USB.
>> 
>> I was thinking that there would be a combination of buttons that I hold down while turning on the power or something like that. Does anyone have any idea how this can be done?
>> Thanks a lot for the help.
>> And I apologize for the crosspost if anyone has a problem with that.
>> 
>> 
>> GF
>> 
>> Check me out on twitter
>> http://www.twitter.com/goldfingas
>> 
>> 
>> 
>> _______________________________________________
>> RWP mailing list
>> RWP at reaaccess.com
>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>> 
> 
> _______________________________________________
> RWP mailing list
> RWP at reaaccess.com
> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com


GF

Check me out on twitter
http://www.twitter.com/goldfingas