[RWP] changing the way ReaAccess reports track panning

[indigo]

Thanks, Patrick.
I'll look for some global setting that routes tracks to outputs, though 
I don't ever remember one.
Setting a track's output to my soundcard's outputs in IO Routing doesn't 
save with project settings, I tried that.
When I delete that synth, then exit and save the project, next time I go 
in and insert a new soft synth, its output is not assigned.
It's a mystery!! smile.
I'm not a total believer in  cause and effect in this universe, maybe 
that's my problem.
Indigo L


On 5/1/2012 5:15 PM, Patrick Perdue wrote:
> I don't like using the alt arrow things, because it takes forever to get
> where I'm going. In this case, either in the track view or when an item
> is highlighted, then tabbing to pan.
>
> As to your other question, the only thing I can possibly think of is
> that your master track is going to channels that aren't routed to
> whatever the final output stage of your interface is, and that's been
> set to default, or new tracks aren't being routed to master in the first
> place. There are other possibilities, but that's the first thing I'd
> look for.
>
>
> On 5/1/2012 3:51 PM, indigo wrote:
>> Where were you positioned in Reaper; when you read pan values, in the
>> track options at the tab key, or in the items menu or where?
>> In Wineyes, I adjust pan and volume with the default Reaper alt+arrows
>> shortcut; left and right for pan, up and down for volume.
>> It also works in NVDA.
>> I use it in track view and in the effects routing page, the only place
>> that shortcut doesn't work is if you're in the shift+p parameters list.
>> If you discover how to get panning in db's, let us know.
>>
>> I posted, but don't know if you noticed it, but do you have a clue why I
>> now need to go to IO routing and assign audio output to my sound card's
>> outputs for each soft synth I insert.
>> I definitely never needed to do that previous to a lockup in Reaper 4.21.
>> Before that, all soft synths came up playing, no audio output assignment
>> required.
>> I've installed 4.22, but the little annoyance persists.
>> I can restore factory default settings, I suppose, but I'd rather learn
>> the cause.
>> Thanks,
>> Indigo L
>>
>> On 5/1/2012 2:28 PM, Patrick Perdue wrote:
>>> Hi all:
>>>
>>> I've somehow managed to change something in Reaper, or perhaps
>>> ReaAccess. Don't know. In either case, track and item pan position is
>>> now read in DB measurement rather than percentage, or so it seems. The
>>> extremes are +90 and -90. Something that is panned 50% to the right, for
>>> example, shows as +6.0, which makes sense in terms of DB values.
>>> This is nice in a way, as I can see exactly how much volume reduction
>>> takes place on either side, depending on if the track or item is panned
>>> left or right, but I have no idea how I did this, or even that it was
>>> possible to change this. Does anyone else know this thing?.
>>>
>>> _______________________________________________
>>> RWP mailing list
>>> RWP at reaaccess.com
>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>
>>
>> _______________________________________________
>> RWP mailing list
>> RWP at reaaccess.com
>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>
>
> _______________________________________________
> RWP mailing list
> RWP at reaaccess.com
> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>