[RWP] Recording in Reaper

[indigo]

Both your Tyros and your delta card should be thoroughly enabled.
Do you know the little trick of getting enabled to show?
Now, this may be a tiny bit different in Jaws, but in Window-Eyes; I 
arrow up or down to  the delta with the word disabled, then route the PC 
cursor to the number pad, whatever you need to do to make that happen in 
Jaws.
Then go to the number pad, find the words Delta Disabled, and left click 
on those words at the number pad.
Then go back to the list of midi devices at your arrow keys; and you 
will find a configure dialog.
Press enter on the configure dialog, and, at the tab key you will find:
Enable this device for midi messages, put a check mark on that.
For the Tyros you would also find Enable this device to send midi 
controller messages.
Put a check mark on that.
After both your Tyros and delta have enabled, and you have place 
checkmarks on actions you want them to perform, tab down to Apply and 
Okay and click on those
You will be returned to track mode, where you can record both midi and 
audio tracks.

Indigo L

On 3/25/2012 7:19 PM, Alex Westphal wrote:
> Hi Indigo!
>
> My Delta is disabled and my Tyros (Digital Workstation) is enabled.
>
>
> _______________________________________________
> RWP mailing list
> RWP at reaaccess.com
> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>