[RWP] Adjusting Parameters of Certain Plugins

[indigo]

Roy, I just never noticed before, but running NVDA, in the Windows 
control panel Sounds, advanced volume, left arrow and down arrow both 
lower volume , right arrow and up arrow both raise volume.
So, it's not just in Reaper's sliders,both sets of arrows could be  used 
elsewhere in Windows.
Indigo L



On 3/22/2012 7:25 PM, Roy Shtupler wrote:
> yes , same thing here with Jaws.
> best
> Roy.
> http://elephant-dolphin.bandcamp.com
> ----- Original Message ----- From: "indigo" <33indigo at charter.net>
> To: "Reapers Without Peepers" <rwp at reaaccess.com>
> Sent: Thursday, March 22, 2012 4:32 AM
> Subject: Re: [RWP] Adjusting Parameters of Certain Plugins
>
>
>> Roy, I wonder if we're getting a little difference in what
>> screenreaders are seeing in Reaper?
>> Both with NVDA and Wineyes 6.1, While in the track view, after
>> pressing shift+P to bring up the parameter list, after up/down
>> arrowing to a parameter name; I need to tab down once from the list to
>> place focus onto the edit box, I need to tab down twice to place focus
>> on the slider.
>> and here's the peculiar thing I hadn't noticed before:
>> Not only left arrow lowers the value and right arrow raises the value,
>> as you say, but down arrow also raises the value and up arrow lowers
>> the value.
>> I don't ever remember finding a situation anywhere in any program
>> where left/right arrow and up/down arrow did the same thing.
>> Also, as in many other places in Reaper; holding down any of the arrow
>> keys causes values to scroll.
>> Also, as I thought I remembered, page up lowers values by increments
>> of 100, page down increases values by increments of 100.
>> Also, the home key jumps to 0 and the end key jumps to 1000.
>> Are you getting the same in Jaws, with focus on the sliders, up and
>> down arrows also changing values, or do only left and right arrows
>> change values?
>> Thanks,
>> Indigo L
>>
>>
>>
>> On 3/21/2012 3:27 PM, Roy Shtupler wrote:
>>> tabbing once from the list places focus on a slider; this will alter the
>>> value as you move it with left/right arrow keys
>>> hope this helps
>>> Roy..
>>> http://elephant-dolphin.bandcamp.com
>>> ----- Original Message ----- From: "Jim Snowbarger"
>>> <Snowman at SnowmanRadio.com>
>>> To: "Reapers Without Peepers" <rwp at reaaccess.com>
>>> Sent: Wednesday, March 21, 2012 4:34 AM
>>> Subject: Re: [RWP] Adjusting Parameters of Certain Plugins
>>>
>>>
>>>> Playing with the Sonitus FX Equalizer, just checking out what Jessica
>>>> was asking about.
>>>> I have not been in here before.
>>>>
>>>> So, from the track view, I pressed f, and chose this pluggin and added
>>>> it to the track.
>>>> Armed my track for recording with record monitor enabled, so I could
>>>> hear myself coming out of the outputs, as my microphone fed the track.
>>>> Nice way to check out what effect your effect is having. Really, just
>>>> another way to see what condition your condition is in.
>>>>
>>>> Then, press shift+p to look at the parameters.
>>>>
>>>> Do I really understand this correctly? There are 32 parameters in
>>>> here, shown one at a time.
>>>> With the jaws cursor I also found a line just below the parameter name
>>>> that says
>>>> Value: 0.0
>>>> Or something like that.
>>>>
>>>> As you arrow up and down through the parameters, the valuve field is
>>>> populated with the setting for that parameter.
>>>> For the frequencies, is the value shown in hertz, or something useful?
>>>> No, heck no. Just an inscrutibel number.
>>>>
>>>> So, how do you change these values? The only way I could do it is by
>>>> double left clicking the numbers on the value line, and then editing
>>>> it like a text edit box. The effect changes immediately as you edit
>>>> the numbers.
>>>> But, oh my god, that is a horribly painful way to taylor a simple E Q.
>>>> So much for the artistic, creative experience. Is there some value
>>>> change key pair I am missing? Or, is editing these numbers the only
>>>> way.
>>>>
>>>> Jessica, Which plug were you messing with?
>>>>
>>>>
>>>> ----- Original Message ----- From: "Jessica Brasseal"
>>>> <jessica.brasseal2010 at gmail.com>
>>>> To: <RWP at reaaccess.com>
>>>> Sent: Sunday, March 18, 2012 2:49 PM
>>>> Subject: [RWP] Adjusting Parameters of Certain Plugins
>>>>
>>>>
>>>>> Hello all,
>>>>>
>>>>> I'm fairly new to this list, so forgive me if this has already been
>>>>> brought to the table before, but I've noticed that after adding FX to
>>>>> my track, I can get to the list of parameters using SHIFT+P, but no
>>>>> matter how much I change the parameters of some of the plugins, I
>>>>> don't hear any noticeable difference, at all. I've found this seems to
>>>>> happen to me when I use plugins that don't appear to have a list of
>>>>> presets. whether these plugins really don't have any presets, or the
>>>>> list just isn't accessible, I'm not sure. Has anyone else noticed
>>>>> this? And if so, is there any way around it? Much thanks.
>>>>>
>>>>> _______________________________________________
>>>>> RWP mailing list
>>>>> RWP at reaaccess.com
>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> RWP mailing list
>>>> RWP at reaaccess.com
>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>
>>>
>>> _______________________________________________
>>> RWP mailing list
>>> RWP at reaaccess.com
>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>
>>
>> _______________________________________________
>> RWP mailing list
>> RWP at reaaccess.com
>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>
>
> _______________________________________________
> RWP mailing list
> RWP at reaaccess.com
> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>