[RWP] Very simple question

[Roy Shtupler]

no , the one with the length and rate is the right choice.

am now investigating into Python and writing reaaccess using the ReaScript 
feature so we'll no longer have to wait for reaaccess developers.
cheers
Roy.
http://elephant-dolphin.bandcamp.com
----- Original Message ----- 
From: "indigo" <33indigo at charter.net>
To: "Reapers Without Peepers" <rwp at reaaccess.com>
Sent: Friday, February 17, 2012 1:44 AM
Subject: Re: [RWP] Very simple question


> Thanks, Roy.
> I will check the recorded item's length  as you suggest..
> Before recording, I've been setting limit project length to 2 measures, in 
> project settings advanced.
> I've been  setting time to beats position length rate.
> Maybe I should set time to beats position only, which is the third choice?
> Indigo L
>
>
> On 2/16/2012 4:29 PM, Roy Shtupler wrote:
>> try checking the length of the midi item in the item properties dialog
>> (Shift+F2) with the item in question selected , and see if it's exactly
>> 2 measures.
>> of course , don't forget to set the measurement to beats rather than 
>> time.
>> hope this helps
>> Roy.
>>
>> http://elephant-dolphin.bandcamp.com
>> ----- Original Message ----- From: "indigo" <33indigo at charter.net>
>> To: "Reapers Without Peepers" <rwp at reaaccess.com>
>> Sent: Thursday, February 16, 2012 12:36 PM
>> Subject: [RWP] Very simple question
>>
>>
>>> I'm trying to get reaper to be a very simple loop recorder.
>>> I hear an inspiring sequence or arpeggio in one of my VST
>>> instruments,and want to record an exactly 2 measure or exactly 4
>>> measure loop in Reaper.
>>> I set track properties to record touch.
>>> This means that I don't need to concern myself with beginning the
>>> recording at exactly 000, after metronome countdown; Reaper only
>>> begins recording when i touch the keyboard keys a at 000, and
>>> recording is supposed to end at exactly the end of 2 measures.
>>> There is supposed to be no missing first note; and also no silence
>>> before recording begins.
>>> Okay, so good so far.
>>> I set up, in project properties, advanced, to limit length of
>>> recording to exactly 2 measures.
>>> But, although Reaper is set to limit recording length to exactly 2
>>> measures; there's a little error between my intended 2 measure loop
>>> legth lenth and what actually occurs.
>>> This discrepancy was a known math bug way back in Reaper 1, but was
>>> supposedly fixed in later versions.
>>>
>>> Also, even when I manage to record an exact 2 measure seamless midi
>>> loop, when I render the 2 measure midi loop to audio, there's an
>>> audible gap between repeats of the audio loop.
>>> Sure, I can take the audio loop to Sound Forge and spend time trimming
>>> the length and finding the exact zero crossing point to end up with a
>>> perfect loop, but I shouldn't have to.
>>>
>>> If I begin with a 2 measure midi loop that loops seamlessly, I should
>>> get a 2 measure seamless audio loop.
>>> Audio latency can't be the cause, I'm getting 5 ms or less latency.
>>>
>>> 2 measures is 2 measures, why can't I get Reaper to record what I set
>>> it to record, and not run over that length; or stop recording short of
>>> the 2 measure recording length I previoussly set?
>>> I don't get it, what's the problem here?
>>> Does anyone know a better setup to achieve what I want??
>>> Thanks for any help,
>>> Indigo L
>>>
>>> _______________________________________________
>>> RWP mailing list
>>> RWP at reaaccess.com
>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>
>>
>> _______________________________________________
>> RWP mailing list
>> RWP at reaaccess.com
>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>
>
> _______________________________________________
> RWP mailing list
> RWP at reaaccess.com
> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com