[RWP] "Some Components Are Not Found"
Rikki Chaplin
rikki at phronesiscoaching.com.au
Sun Nov 27 05:47:27 EST 2011
Well I’ll be buggered! ReAccess installed without a problem when I got the 64 bit version, so I can only publicly state what an idiot I am for not knowing that I had a 64 bit system! I never asked for one specifically when I bought this laptop, so it didn’t even occur to me to check this out. I figured most computers off the shelf are 32 bit, so I had no reason to think mine was any different! Sorry for wasting everyone’s time!
So now I can tab around the dialogue, but my preferences don’t seem to be remembered on the track for long. For example, when I arm the track it only remembers it until I move to another control. Guess I’ll just keep playing now!
Thanks,
Rikki.
From: Rikki Chaplin
Sent: Sunday, November 27, 2011 9:25 PM
To: Reapers Without Peepers
Subject: Re: [RWP] "Some Components Are Not Found"
Well I didn't think I did have a 64 bit system, but hey I'm not
that computer savvy. I've just picked up a few tips and tricks
along the way! Well anything's worth a try at this point! I'll
grab the 64 bit version and see what happens!
Thanks,
Rikki.
----- Original Message -----
From: Gianluca Apollaro <gianluca.apollaro88 at gmail.com
To: Reapers Without Peepers <rwp at reaaccess.com
Date sent: Sun, 27 Nov 2011 11:17:58 +0100
Subject: Re: [RWP] "Some Components Are Not Found"
Hi again, x86 folder? That makes me think you have a 64 bit
version of
the operating system, so you have to install the 64 bit version
of
reaper itself.
Bye,
Gianluca from Italy
Skype ID: gianluca8815
Il 27/11/2011 11:06, Rikki Chaplin ha scritto:
Hi Gian,
I found the roming folder and I did find a Reaper folder in
there with
components in it which are not present in the X86 programs
Reaper
folder. I tried moving these items to the Roming folder where
the
other Reaper folder was. No success there, so I tried moving
everything back to the X86 programs file folder. No luck when I
did
that either. I'm still getting the same prompt no matter which
location the Reaper folder is in. So are there yet more
components
missing do you think that are elsewhere, or should the Reaper
folder
be in a different location? This is driving me crazy!
Thanks,
Rikki.
*From:* Gianluca Apollaro <mailto:gianluca.apollaro88 at gmail.com
*Sent:* Sunday, November 27, 2011 6:51 PM
*To:* Reapers Without Peepers <mailto:rwp at reaaccess.com
*Subject:* Re: [RWP] "Some Components Are Not Found"
Hi Rikki and all,
I think this is all due to where reaper installs the
configuration
components when you first run it without reaaccess. I had a
similar
problem once and managed to fix it. What happened to me was
that
windows for some odd reasons changed the path to where reaper
installed the config and other components. The usual path
should be
C:\Users\YourUser\AppData\Roaming\REAPER. To locate your user
folder
you can do the following.
Type windows+R and then tipe the period sign, press enter and
your in
your user folder. In there look for AppData\roaming; if you
don't find
any folder named REAPER that's the problem. The folder has not
to be
empty but must contain other folders in it like ColorThemes etc,
those
are the missing components reaaccess wants. Probably windows
decided
to put those in another path. What I did is creating an empty
folder
named REAPER so that reaaccess could install. I then found were
windows put the missing components and manually moved what
reaaccess
put in the folder I've created in its proper path.
I tried my best to explain what happened to me and I hope it
helps,
even if it sounds confusing.
Best regards,
Gianluca from Italy
SkypeID: gianluca8815
Il 27/11/2011 06:46, Rikki Chaplin ha scritto:
Hi Kerry,
Well this beats me! I did exactly as you said, double checked
that
the user account control is definitely turned off, and still got
the
same result with the version of Reaper that you suggested. I
think
Jim is right! God obviously objects to me using Reaper on this
laptop
for some reason!
Regards,
Rikki
*From:* Rikki Chaplin <mailto:rikki at phronesiscoaching.com.au
*Sent:* Saturday, November 26, 2011 2:38 PM
*To:* Reapers Without Peepers <mailto:rwp at reaaccess.com
*Subject:* Re: [RWP] "Some Components Are Not Found"
No worries. I just tried it on an XP machine with no problem at
all.
That at least gives me a couple of options, as I have another
laptop
with Jaws on it which is running XP. I'm now going to try and
fool my
Windows 7 machine by copying the folder from the program files
directory on the XP machine onto my Windows 7 laptop, as I
really
would like to use this machine. It's a really nice setup.
Failing
that, I'll go with XP. That laptop needed to find a good use
anyway!
Regards,
Rikki.
*From:* Jim Snowbarger <mailto:Snowman at SnowmanRadio.com
*Sent:* Saturday, November 26, 2011 2:21 PM
*To:* Reapers Without Peepers <mailto:rwp at reaaccess.com
*Subject:* Re: [RWP] "Some Components Are Not Found"
Yep, I see from below, that you already discussed this. Sorry.
When you installed reaper, did you mess with any of the optional
checkboxes? or did you just leave them at their default
settings.
Likewise when installing ReAccess.
If I were you, I would uninstall both of them, and reboot my
machine. Then, install reper, leaving all selections defaulted.
Run reaper, an drink a really nice cup of hot tea while it
thinks
about itself, then close reaper.
Then, install ReAccess, leaving all selections defaulted.
If it still doesn't work, I would throw up my hands, and
conclude
that God didn't want me to do this.
I wish I could help further. Or, even at all, for that matter.
I'm ot an NVDA user, so I'm not sure if that has any impact, but
I
doubt it. I think several people are using that.
----- Original Message -----
*From:* Rikki Chaplin <mailto:rikki at phronesiscoaching.com.au
*To:* Reapers Without Peepers <mailto:rwp at reaaccess.com
*Sent:* Friday, November 25, 2011 9:44 PM
*Subject:* Re: [RWP] "Some Components Are Not Found"
Hi,
I hate to be difficult, but I did all that! I even tried
going
back to version 3.78 and the same thing happened. Another
stupid
question, but is there a specific length of time I should
keep
reaper open. I don't get any prompts that tell me that any
kind
of setup has finished or to wait for a setup to finish. I'm
stuck
for ideas now.
Thanks,
Rikki.
*From:* Jim Snowbarger <mailto:Snowman at SnowmanRadio.com
*Sent:* Saturday, November 26, 2011 1:37 PM
*To:* Reapers Without Peepers <mailto:rwp at reaaccess.com
*Subject:* Re: [RWP] "Some Components Are Not Found"
Sorry, I haven't followed this very closely. Appopogize if
stating the obvious.
Last I new about this was that, when you install reaper, you
first needed to run reaper by itself, with outt installing
ReAccess. That first run of Reaper did some further setup
activities, and got things ready.
Then, you close reaper. Then, you should be ready to
install
ReAccess.
Maybe you should just uninstall everything, and run that
sequence.
----- Original Message -----
*From:* Rikki Chaplin
<mailto:rikki at phronesiscoaching.com.au
*To:* Reapers Without Peepers <mailto:rwp at reaaccess.com
*Sent:* Friday, November 25, 2011 4:43 PM
*Subject:* Re: [RWP] "Some Components Are Not Found"
Just some further information here. When I go to
install
Reaper, in the components, I am unable to check the
"required
files" component. I suspect this might have something
to do
with the scripts refusing to install, but I'm just
guessing.
Is there a way around this issue in the Reaper
installation
process? Or is this checkbox not being checked relevant
at
all? Just a reminder that I'm using NVDA. Perhaps it's
an
accessibility issue with that particular check box on
second
thoughts, but again I'm not sure.
Thanks,
Rikki.
*From:* Rikki Chaplin
<mailto:rikki at phronesiscoaching.com.au
*Sent:* Friday, November 25, 2011 9:57 PM
*To:* rwp at reaaccess.com <mailto:rwp at reaaccess.com
*Subject:* Re: [RWP] "Some Components Are Not Found"
Hi all,
I only found out about reaper and its accessibility
yesterday, so please forgive me for revisiting a topic
which
I know has been covered following my web searches to
find an
answer. I'm getting this same prompt that others have
mentioned when I attempt to install the reaaccess
scripts
that some components can not be found. I did run
Reaper and
then exit, both as suggested by the prompt and by
another
list member, but still no joy! Can someone tell me how
to
resolve this please? I'm running Windows 7 32 bit.
Thanks,
Rikki.
_______________________________________________
RWP mailing list
RWP at reaaccess.com <mailto:RWP at reaaccess.com
http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
_______________________________________________
RWP mailing list
RWP at reaaccess.com <mailto:RWP at reaaccess.com
http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
_______________________________________________
RWP mailing list
RWP at reaaccess.com <mailto:RWP at reaaccess.com
http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
_______________________________________________
RWP mailing list
RWP at reaaccess.com <mailto:RWP at reaaccess.com
http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
_______________________________________________
RWP mailing list
RWP at reaaccess.com <mailto:RWP at reaaccess.com
http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
_______________________________________________
RWP mailing list
RWP at reaaccess.com <mailto:RWP at reaaccess.com
http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
_______________________________________________
RWP mailing list
RWP at reaaccess.com <mailto:RWP at reaaccess.com
http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
_______________________________________________
RWP mailing list
RWP at reaaccess.com
http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
_______________________________________________
RWP mailing list
RWP at reaaccess.com
http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
--------------------------------------------------------------------------------
_______________________________________________
RWP mailing list
RWP at reaaccess.com
http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://bluegrasspals.com/pipermail/rwp/attachments/20111127/61b8c26a/attachment.html>
More information about the Rwp
mailing list