[RWP] controlling parameters with external physical widgets

[Roy Shtupler]

thanks very much; will have a look.
cheers
Roy.
  ----- Original Message ----- 
  From: Gmail 
  To: Reapers Without Peepers 
  Sent: Tuesday, January 11, 2011 12:30 PM
  Subject: Re: [RWP] controlling parameters with external physical widgets


  Hi Roy,
  You can assign volume, pan, aux sends etc. to a midi controller in the same way you assign your keyboard shortcuts. But it's much easier to a connect a control surface, to do these kind of things. I have a faderport and a Tranzport. The Faderpohrt has one fader, one pan knob and a bunch of buttons you can push to activate the transport controls as well as some buttons for loop, markers and also dedicated buttons for automation. Read, Write, Touch and off.
  You can set these up when you go to preferences/control surfaces. 
  Hope this helps a bit...
  All the best,
  Rene

  Op 11 jan. 2011 om 11:11 heeft Roy Shtupler <shtupler at 013.net> het volgende geschreven:


    hi listers
    am using Reaper 3.74 with ReaAccess 1.3.0.0 , and wish to control a track's built-in volume/pan/mute parameters from an external control surface.
    I get into the Envelopes dialog and see the names and status (visible/arm/etc) for each envelope , but no mention of a "learn" or similar method of binding it to an external controller.
    is there a way to do it? , am I missing something here?
    thanks very much for any help
    Roy.
    _______________________________________________
    RWP mailing list
    RWP at reaaccess.com
    http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com



------------------------------------------------------------------------------


  _______________________________________________
  RWP mailing list
  RWP at reaaccess.com
  http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://bluegrasspals.com/pipermail/rwp/attachments/20110111/895e1895/attachment.html>