[RWP] problem solved , was Re: [midi-mag] routing of multi channel audio tracks

[Roy Shtupler]

and when the "Hardware" radio button is selected , they route between the 
track's channels and the physical audio outputs of the chosen interface.
cheers
Roy.
----- Original Message ----- 
From: "Jim Snowbarger" <Snowman at SnowmanRadio.com>
To: "Reapers Without Peepers" <rwp at reaaccess.com>
Sent: Thursday, February 10, 2011 5:02 AM
Subject: Re: [RWP] problem solved , was Re: [midi-mag] routing of multi 
channel audio tracks


> Very interesting,
> I wondered what those buttons were for.  Thanks for that.
>
> ----- Original Message ----- 
> From: "Roy Shtupler" <shtupler at 013.net>
> To: <midimag at midimag.org>
> Cc: "Reapers Without Peepers" <rwp at reaaccess.com>; 
> <realmusicians at freelists.org>
> Sent: Wednesday, February 09, 2011 4:59 PM
> Subject: [RWP] problem solved , was Re: [midi-mag] routing of multi 
> channel audio tracks
>
>
>> hi Ross and all
>> just solved my own issue; it's done from the Track I/O dialog , accessed 
>> with Shift+I while in Reaper's track view.
>> select the "sends" radio button , then tab to the combo box with the list 
>> of active sends , after selecting a send , tab until you come across a 
>> pair of buttons with a pointing arrow in between them.
>> the first button determines which of the source track's audio channels 
>> feed the send , while the second one determines which channels on the 
>> destination track will receive the stream.
>> all the very best
>> Roy.
>> www.soundclick.com/tzackeek
>> ----- Original Message ----- 
>> From: "Ross McGregor" <rossmcg at hotkey.net.au>
>> To: <midimag at midimag.org>
>> Sent: Thursday, February 10, 2011 12:46 AM
>> Subject: Re: [midi-mag] routing of multi channel audio tracks
>>
>>
>> Hi Roy,
>> I didn't quite follow your message there. don't know if you ment sending 
>> a mono track to 2 physical outs on your card. or sending a stereo track 
>> to a pair of physical outs. or sending a mono track to one output.
>>
>> on cubase i have a track output selection. can feed the track either to 
>> the main stereo out, or send it to any of the outputs on the audio card. 
>> or send it to a group.
>>
>> I imagine you would have a track output assign selection in sonar?
>>
>> Ross.
>>
>>
>>
>> but presume you want to send
>>  ----- Original Message ----- 
>>  From: Roy Shtupler
>>  To: Reapers Without Peepers ; midimag at midimag.org ; 
>> realmusicians at freelists.org
>>  Sent: Thursday, February 10, 2011 9:02 AM
>>  Subject: [midi-mag] routing of multi channel audio tracks
>>
>>
>>  hi listers
>>  I have a multi-channel audio track e.g whose number of audio channels is 
>> set to 16; and wish to split every pair of channels to a seperate track.
>>  what is the easiest , most accessible way for us to route each send to a 
>> pair of channels e.g a send to track 2 will send audio from channels 1 
>> and 2 , a send to track 3 will deliver the audio from channels 3 and 4 , 
>> and so on?
>>  any ideas greatly appreciated.
>>  cheers
>>  Roy.
>>  www.soundclick.com/tzackeek
>>
>>
>>  __________ Information from ESET NOD32 Antivirus, version of virus 
>> signature database 5860 (20110209) __________
>>
>>  The message was checked by ESET NOD32 Antivirus.
>>
>>  http://www.eset.com
>>
>>
>>
>>
>> To unsubscribe, send a message to: midimag-unsubscribe at midimag.org
>> http://www.midimag.org/
>>
>> _______________________________________________
>> RWP mailing list
>> RWP at reaaccess.com
>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>
>
>
> _______________________________________________
> RWP mailing list
> RWP at reaaccess.com
> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com