[RWP] problem solved , was Re: [midi-mag] routing of multi channel audio tracks

[Jim Snowbarger]

Very interesting,
I wondered what those buttons were for.  Thanks for that.

----- Original Message ----- 
From: "Roy Shtupler" <shtupler at 013.net>
To: <midimag at midimag.org>
Cc: "Reapers Without Peepers" <rwp at reaaccess.com>; 
<realmusicians at freelists.org>
Sent: Wednesday, February 09, 2011 4:59 PM
Subject: [RWP] problem solved , was Re: [midi-mag] routing of multi channel 
audio tracks


> hi Ross and all
> just solved my own issue; it's done from the Track I/O dialog , accessed 
> with Shift+I while in Reaper's track view.
> select the "sends" radio button , then tab to the combo box with the list 
> of active sends , after selecting a send , tab until you come across a 
> pair of buttons with a pointing arrow in between them.
> the first button determines which of the source track's audio channels 
> feed the send , while the second one determines which channels on the 
> destination track will receive the stream.
> all the very best
> Roy.
> www.soundclick.com/tzackeek
> ----- Original Message ----- 
> From: "Ross McGregor" <rossmcg at hotkey.net.au>
> To: <midimag at midimag.org>
> Sent: Thursday, February 10, 2011 12:46 AM
> Subject: Re: [midi-mag] routing of multi channel audio tracks
>
>
> Hi Roy,
> I didn't quite follow your message there. don't know if you ment sending a 
> mono track to 2 physical outs on your card. or sending a stereo track to a 
> pair of physical outs. or sending a mono track to one output.
>
> on cubase i have a track output selection. can feed the track either to 
> the main stereo out, or send it to any of the outputs on the audio card. 
> or send it to a group.
>
> I imagine you would have a track output assign selection in sonar?
>
> Ross.
>
>
>
> but presume you want to send
>  ----- Original Message ----- 
>  From: Roy Shtupler
>  To: Reapers Without Peepers ; midimag at midimag.org ; 
> realmusicians at freelists.org
>  Sent: Thursday, February 10, 2011 9:02 AM
>  Subject: [midi-mag] routing of multi channel audio tracks
>
>
>  hi listers
>  I have a multi-channel audio track e.g whose number of audio channels is 
> set to 16; and wish to split every pair of channels to a seperate track.
>  what is the easiest , most accessible way for us to route each send to a 
> pair of channels e.g a send to track 2 will send audio from channels 1 and 
> 2 , a send to track 3 will deliver the audio from channels 3 and 4 , and 
> so on?
>  any ideas greatly appreciated.
>  cheers
>  Roy.
>  www.soundclick.com/tzackeek
>
>
>  __________ Information from ESET NOD32 Antivirus, version of virus 
> signature database 5860 (20110209) __________
>
>  The message was checked by ESET NOD32 Antivirus.
>
>  http://www.eset.com
>
>
>
>
> To unsubscribe, send a message to: midimag-unsubscribe at midimag.org
> http://www.midimag.org/
>
> _______________________________________________
> RWP mailing list
> RWP at reaaccess.com
> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>