[RWP] Beginner Reaper questions

Sun May 30 16:04:03 EDT 2010

in Sonar , when in asio mode , you can have either your guitars asio driver 
ins and outs check , or your SafFire ones check from the 
options|audio|drivers dialog; not both.
then you can select which ins/outs to use from your prefared driver.
in contrast , with wdm you can use ins/outs from multiple devices/drivers at 
the same time.
hope this helps
Roy.
www.soundclick.com/tzackeek
----- Original Message ----- 
From: "Monkey Pusher" <monkeypusher69 at gmail.com>
To: "Reapers Without Peepers" <rwp at reaaccess.com>
Sent: Sunday, May 30, 2010 10:19 PM
Subject: Re: [RWP] Beginner Reaper questions


> That wouldn't work in my case. Example my guitar fx  processor has
> ausb audio  in and out wit asio drivers , as does my focusrite saffire
> card. what i would of liked to have done is  record from the guitar fx
> processor usb the sound with the amp models and all the effects and
> from my saffire record  the clean guitar with nothing on  it  for the
> purposes of reamping it later should i choose to add to the guitar
> sound. In sonar it shows you all the ASIO or WDM or etc devices and
> gives you check boxes for you to select which ins and outs for any of
> those devices you want availabe in sonar . Reaper   you have to choose
> ASIO then the ASIO  device then the inputs  and outputs range for that
> device.  Not too worried about it though as i have  enough ins  on the
> saffire now that i can just run the analog outs of the guitar
> processor into  that as well..
>
> On 5/30/10, Roy Shtupler <shtupler at 013.net> wrote:
>> asio in general allows one device/interface at a time; however , in case 
>> of
>> multiple input/outputs you can send the minimum and maximum in/out number
>> for reaper to use.
>> hope this helps
>> Roy.
>> www.soundclick.com/tzackeek
>> ----- Original Message -----
>> From: "Monkey Pusher" <monkeypusher69 at gmail.com>
>> To: "Reapers Without Peepers" <rwp at reaaccess.com>
>> Sent: Sunday, May 30, 2010 6:31 PM
>> Subject: Re: [RWP] Beginner Reaper questions
>>
>>
>>> Thanks that one did work, But Scott if there is a setting you remember
>>> so i can get it to act like every other daw does then that would be
>>> great as well  but this works for now, thanks again.
>>> As for one ASIO device at a time i am guessing this is one of the
>>> features of sonar i'll miss, but i will take a look and see it it will
>>> let me do it with wdm devices, but get the feeling that wont work
>>> either given the way the devices preference area is laid out. I don't
>>> know but is it just me or does this  DAW feel "lightweight" in
>>> comparison to other DAWS.
>>>
>>> On 5/30/10, jinseng at yandex.ru <jinseng at yandex.ru> wrote:
>>>> Hey MonkeyPusher and Scott, just tried cutting the portion of track, so
>>>> here
>>>> are the steps:
>>>> 1. Select the track - arrows up and down;
>>>> 2. select the item of track - Ctrl + right or ctrl + left;
>>>> 3. set the beginning and the end of item's portion with page up and 
>>>> page
>>>> down and with Alt + Shift + [/];
>>>> 4. cut with Ctrl + delete.
>>>> Everything works.
>>>> Another question ASIO. Yes, Reaper and other DAWs deel with only one 
>>>> ASIO
>>>> device at once.
>>>> Cheers!
>>>>
>>>> 30.05.10, 04:41, "Monkey Pusher" <monkeypusher69 at gmail.com>:
>>>>
>>>>> I myself am having an issue here around selecting tracks. the up 
>>>>> anddown
>>>>> arrow seems to work as they should  but then when i use shiftwith the
>>>>> page
>>>>> a u p & page down to select the messures i want selectedon that track 
>>>>> it
>>>>> when i cut or delete that info that i selected itdoes it for all the
>>>>> tracks in the project not just the one i wanted to remove. Also is 
>>>>> there
>>>>>
>>>>> a
>>>>> way to have reaper record from more than oneASIO device at once it 
>>>>> seems
>>>>> like it will only see one of my ASIOaudio interface at a time.On
>>>>> 5/29/10,
>>>>> Mike Calvo Yesterday Today and Forever Ministries<mike at mikecalvo.com>
>>>>> wrote:I have one of these units and all I had to do was install the
>>>>> software,plug it in, power it up, and activate it in the control
>>>>> surface's
>>>>> in Reaper.It really is as easy as that. Scott I got mine in
>>>>> canadahttp://www.pgmusic.com/index.html I paid $199 plus $25 shipping.
>>>>> It'sbest to call them because I had trouble looking for it on the
>>>>> site.Anyone that can buy this, do it! It's great for blind
>>>>> users.Mike--Email services provided by the System Access Mobile 
>>>>> Network.
>>>>> Visitwww.serotek.com to learn more about accessibility
>>>>> anywhere._______________________________________________RWP mailing
>>>>> listRWP at reaaccess.comhttp://reaaccess.com/mailman/listinfo/rwp_reaaccess.com_______________________________________________RWP
>>>>> mailing
>>>>> listRWP at reaaccess.comhttp://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>
>>>>
>>>> --
>>>> Яндекс.Почта. Письма есть. Спама - нет. 
>>>> http://mail.yandex.ru/nospam/sign
>>>> _______________________________________________
>>>> RWP mailing list
>>>> RWP at reaaccess.com
>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>
>>>
>>> _______________________________________________
>>> RWP mailing list
>>> RWP at reaaccess.com
>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>
>>
>>
>>
>> _______________________________________________
>> RWP mailing list
>> RWP at reaaccess.com
>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>
>
> _______________________________________________
> RWP mailing list
> RWP at reaaccess.com
> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>