[RWP] chaining fx over tracks

[Derek Lane]

I'd think just 1 would be required honestly, honoring the pan positions of 
the mic and keyboard, unless I'm missing the advantage of sends in this 
context.
----- Original Message ----- 
From: "clarence griffin" <goldfingas at gmail.com>
To: "Reapers Without Peepers" <rwp at reaaccess.com>
Sent: Tuesday, June 15, 2010 9:47 PM
Subject: Re: [RWP] chaining fx over tracks


> wow, it takes 3 tracks? where do I do the setting of inputs and outputs?
>
> GF
>
>
> On Jun 15, 2010, at 9:34 PM, Simon Jaeger, Laptop Edition wrote:
>
>> The way I set the vocoder up is this:
>> Create one track with the vocoder added, and set that track's output to 
>> the card of choice.
>> Create a second track called microphone, pan that hard left, set the 
>> input to the microphone of choice, and set the send option (in the same 
>> menu as audio output), to track 1. That will send the signal from the 
>> microphone to track 1, the vocoder.
>> finally, create a third track for the keyboard, pan it hard right, set 
>> the input to whichever device the keyboard outputs to, and set its send 
>> to track 1 as well.
>> Finally, arm all the tracks, set the record monitors to normal, and set 
>> the "send to parent" option to off. I'm not even sure what that is 
>> supposed to do, but it makes things have issues, so I make it die. What 
>> I"m not sure about, is whether sends will work even if the tracks in 
>> question aren't armed. I'm not in any position to try this, but maybe 
>> just arming track 1 and setting the monitor to normal will suffice.
>>
>> If you want to have a midi trigger to a saw wave for the vocoder or 
>> something else similar, that's a bit different, but I'm assuming you 
>> already have something set up for that.
>>
>>
>> HTH
>>
>>
>> Simon
>>
>>
>> ----- Original Message ----- From: "clarence griffin" 
>> <goldfingas at gmail.com>
>> To: "Reapers Without Peepers" <rwp at reaaccess.com>
>> Sent: Tuesday, June 15, 2010 9:13 PM
>> Subject: [RWP] chaining fx over tracks
>>
>>
>>> How would I go about chaining fx across tracks. like how would I use a 
>>> vocoder? Wouldn't I need 2 tracks, or could I do it with just 1?
>>> I don't understand how to set the ins and outs of fx.
>>> or as it would be more commonly called, the routing of fx.
>>> Thanks for any help.
>>>
>>> GF
>>>
>>>
>>>
>>> _______________________________________________
>>> RWP mailing list
>>> RWP at reaaccess.com
>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>
>>
>> _______________________________________________
>> RWP mailing list
>> RWP at reaaccess.com
>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>
>
> _______________________________________________
> RWP mailing list
> RWP at reaaccess.com
> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>