[RWP] More on track selection problem

Jayson Smith ratguy at insightbb.com
Fri Jun 4 17:19:53 EDT 2010 

To consolidate audio, is it File, Consolidate? That consolidates audio for 
the entire project, creating a new project. Is this the only way to mass 
squish all items on a track down to one item?
Thanks.
Jayson

----- Original Message ----- 
From: "Derek Lane" <derek at pdaudio.net>
To: "Reapers Without Peepers" <rwp at reaaccess.com>
Sent: Friday, June 04, 2010 3:24 PM
Subject: Re: [RWP] More on track selection problem


> you can consolidate audio for that track, but even if you make a selection 
> and delete, you'll notice 2 items.  1 the source material up to point of 
> deletion, and 2, the material after the deletion.  Given rpp files are 
> loosly xml based, thats the only way to do it.
> ----- Original Message ----- 
> From: "Jayson Smith" <ratguy at insightbb.com>
> To: "Reapers Without Peepers" <rwp at reaaccess.com>
> Sent: Friday, June 04, 2010 3:21 PM
> Subject: Re: [RWP] More on track selection problem
>
>
>> Hi,
>>
>> That seems to be working, but this brings up another question. Assuming 
>> the start and end points of the time selection are both in the middle of 
>> the project, this turns one item into three items. Item 1 is the part 
>> before the selection, item 2 is the selection, and item 3 is the part 
>> after the selection. Once item 2 is deleted, that still leaves two items. 
>> Now, item 1 is the part before the selection, and item 2 is the part 
>> after the selection. That's all fine and good if you're only doing one 
>> delete on the track, but what if you need to do multiple deletes, and 
>> have trouble keeping track of item numbers? What was once item 2 might be 
>> item 4 or 5 before you're done. So, is there a quick and easy way to 
>> smash all items on a track down to one item? I know there's a "heal 
>> split" action, but no keyboard shortcut for it by default. Is this the 
>> only way, or is there a way to just wipe out all item splits on a track?
>> Thanks!
>> Jayson
>>
>> ----- Original Message ----- 
>> From: "Derek Lane" <derek at pdaudio.net>
>> To: "Reapers Without Peepers" <rwp at reaaccess.com>
>> Sent: Friday, June 04, 2010 1:57 PM
>> Subject: Re: [RWP] More on track selection problem
>>
>>
>>> If you split the material  you wish to delete in to a separate item by 
>>> selecting it, and pressing shift+s then navigating to that item, you can 
>>> easily delete just the one piece of track, keeping everything else in 
>>> time.
>>> ----- Original Message ----- 
>>> From: "Roger Smith" <snakeguy at insightbb.com>
>>> To: "Reapers Without Peepers" <rwp at reaaccess.com>
>>> Sent: Friday, June 04, 2010 1:54 PM
>>> Subject: Re: [RWP] More on track selection problem
>>>
>>>
>>>> Hi,
>>>>
>>>> I've been trying to get a better handle on exactly what is happening 
>>>> here. It seems that when you change tracks, all of the tracks stay 
>>>> selected and you can't unselect them with escape. In other words it's 
>>>> kind of like when you press the up or down arrow keys to change tracks 
>>>> the shift is on, except that it isn't. Monkey pusher, is this the same 
>>>> thing you are seeing?  I really want to use this for my all around 
>>>> multi track recorder, but I have to be able to delete pieces of a 
>>>> track. Any ideas as to what settings might solve this problem?
>>>> Thanks again,
>>>> Snake
>>>>
>>>> ----- Original Message ----- 
>>>> From: "Monkey Pusher" <monkeypusher69 at gmail.com>
>>>> To: "Reapers Without Peepers" <rwp at reaaccess.com>
>>>> Sent: Friday, June 04, 2010 11:55 AM
>>>> Subject: Re: [RWP] More on track selection problem
>>>>
>>>>
>>>>> lol i should smack myself for not remembering that tab under 
>>>>> properties thanks
>>>>>
>>>>> On 6/4/10, Scott Chesworth <scottchesworth at gmail.com> wrote:
>>>>>> Hi Monkey,
>>>>>>
>>>>>> Hit Alt+Enter on your ReaAccess.exe file to pull up the properties,
>>>>>> and then you need to move to the versions tab, Ctrl+Tab should get 
>>>>>> you
>>>>>> there. You should find the version number listed there. Your method 
>>>>>> of
>>>>>> checking the history file works just as well though.
>>>>>>
>>>>>> Hth
>>>>>> Scott
>>>>>>
>>>>>> On 6/4/10, Monkey Pusher <monkeypusher69 at gmail.com> wrote:
>>>>>>> where are you guys checking the property to see the version? Well i
>>>>>>> pulled up the history log  under the reaaccess start menu and the
>>>>>>> first item is version 1.1.1.6 march 2010  so i am assuming its the
>>>>>>> latest version i have installed.
>>>>>>>
>>>>>>> On 6/4/10, Scott Chesworth <scottchesworth at gmail.com> wrote:
>>>>>>>> Hi Bob/Monkey,
>>>>>>>>
>>>>>>>> There's a reason that the version number isn't included in the
>>>>>>>> ReaAccess.exe filename, that being so that the download link always
>>>>>>>> remains the same to grab the latest stable build. FYI, older 
>>>>>>>> versions
>>>>>>>> remain on the server, and they get archived with the version number
>>>>>>>> included. An example path would be
>>>>>>>> reaaccess.com/Downloads/ReaAccess1.1.1.5.exe
>>>>>>>>
>>>>>>>> Bob, what version number are you seeing in file properties? The 
>>>>>>>> latest
>>>>>>>> is 1.1.1.6, and the version number seems to be accurate in the copy 
>>>>>>>> I
>>>>>>>> just downloaded.
>>>>>>>>
>>>>>>>> Hth
>>>>>>>> Scott
>>>>>>>>
>>>>>>>>
>>>>>>>> On 6/4/10, Robert Logue <bobcat11 at telusplanet.net> wrote:
>>>>>>>>> Yes please do include the version number in the reaaccess file 
>>>>>>>>> name. I
>>>>>>>>> got
>>>>>>>>> the latest file and when I checked it's properties, it was not the
>>>>>>>>> version
>>>>>>>>> number it should be so I don't know what I have without installing 
>>>>>>>>> it.
>>>>>>>>>
>>>>>>>>> Bob
>>>>>>>>> ----- Original Message -----
>>>>>>>>> From: "clarence griffin" <goldfingas at gmail.com>
>>>>>>>>> To: "Reapers Without Peepers" <rwp at reaaccess.com>
>>>>>>>>> Sent: Thursday, June 03, 2010 11:28 AM
>>>>>>>>> Subject: Re: [RWP] More on track selection problem
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>>I wish we had a place where we could upload presets and stuff like 
>>>>>>>>>>this
>>>>>>>>>> so
>>>>>>>>>>we all could share...
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Jun 3, 2010, at 1:24 PM, Monkey Pusher wrote:
>>>>>>>>>>
>>>>>>>>>>> no rambling  it made sense and comfirmed that i don't have my 
>>>>>>>>>>> stuff in
>>>>>>>>>>> folders
>>>>>>>>>>> Thanks .. Now i am starting to  wonder if maybe its a bug in the
>>>>>>>>>>> version of ReaAccess that  myself and Jason are using. Derek 
>>>>>>>>>>> since you
>>>>>>>>>>> aren't having this issue  can you please send the installer for
>>>>>>>>>>> reaaccess that you used  to install it so we  may try this  out. 
>>>>>>>>>>> Also
>>>>>>>>>>> may i suggest that going forward we include the version number 
>>>>>>>>>>> in the
>>>>>>>>>>> reaaccess .exe file instead of it just being reaaccess.exe?
>>>>>>>>>>>
>>>>>>>>>>> On 6/3/10, clarence griffin <goldfingas at gmail.com> wrote:
>>>>>>>>>>>> each folder is in the list just like tracks. if you arrow up 
>>>>>>>>>>>> and
>>>>>>>>>>>> down,
>>>>>>>>>>>> you
>>>>>>>>>>>> will see the folder names. when you create folders its good to 
>>>>>>>>>>>> name
>>>>>>>>>>>> them
>>>>>>>>>>>>
>>>>>>>>>>>> so
>>>>>>>>>>>> you can know what they are. folders act just like buses. so 
>>>>>>>>>>>> anything
>>>>>>>>>>>> you
>>>>>>>>>>>>
>>>>>>>>>>>> do
>>>>>>>>>>>> to that folder, affects all tracks with in the folders.
>>>>>>>>>>>> The way to create a folder is to first make sure you are above 
>>>>>>>>>>>> the
>>>>>>>>>>>> tracks
>>>>>>>>>>>> you want to place in a folder and create a new track with 
>>>>>>>>>>>> control t.
>>>>>>>>>>>> After
>>>>>>>>>>>> that go to the bottom of the last track you wish to include in 
>>>>>>>>>>>> that
>>>>>>>>>>>> folder
>>>>>>>>>>>> and press control t again, Note that when creating these 
>>>>>>>>>>>> tracks, you
>>>>>>>>>>>> want to
>>>>>>>>>>>> give them the name of the folder, they will become the folder 
>>>>>>>>>>>> in the
>>>>>>>>>>>> next
>>>>>>>>>>>> steps.
>>>>>>>>>>>> After you have a blank track at the top and bottom of the 
>>>>>>>>>>>> tracks you
>>>>>>>>>>>> wish to
>>>>>>>>>>>> place in the folder, move to the first black track that you 
>>>>>>>>>>>> created
>>>>>>>>>>>> at
>>>>>>>>>>>> the
>>>>>>>>>>>> top of the list of tracks, then press shift enter. you will 
>>>>>>>>>>>> hear it
>>>>>>>>>>>> say
>>>>>>>>>>>> "folder."
>>>>>>>>>>>> Then go to the end of last blank track you created at the 
>>>>>>>>>>>> bottom of
>>>>>>>>>>>> the
>>>>>>>>>>>> list
>>>>>>>>>>>> of tracks and press shift enter twice, that will then say end 
>>>>>>>>>>>> of
>>>>>>>>>>>> folder.
>>>>>>>>>>>>
>>>>>>>>>>>> If
>>>>>>>>>>>> you now go to the top folder again that you just created, and 
>>>>>>>>>>>> press
>>>>>>>>>>>> enter on
>>>>>>>>>>>> it, it wwill now have 3 states. Small, close, and open. The 
>>>>>>>>>>>> only ones
>>>>>>>>>>>> that
>>>>>>>>>>>> mean anything to us are open and close. Small looks just like 
>>>>>>>>>>>> open.
>>>>>>>>>>>> When
>>>>>>>>>>>>
>>>>>>>>>>>> you
>>>>>>>>>>>> close the folder, all you will see is that folder name. To get 
>>>>>>>>>>>> to the
>>>>>>>>>>>> tracks
>>>>>>>>>>>> that are in the folder, you must press enter and then it will 
>>>>>>>>>>>> open,
>>>>>>>>>>>> you
>>>>>>>>>>>> can
>>>>>>>>>>>> then see the tracks with in the folder once more. You will be 
>>>>>>>>>>>> able to
>>>>>>>>>>>> turn
>>>>>>>>>>>> all the tracks up and down with in the folder by pressing alt 
>>>>>>>>>>>> up and
>>>>>>>>>>>> down
>>>>>>>>>>>> arrow on the folder. The same thing applies to adding fx and 
>>>>>>>>>>>> stuff
>>>>>>>>>>>> like
>>>>>>>>>>>> that. when you press F on the folder, it will open the fx for 
>>>>>>>>>>>> the
>>>>>>>>>>>> entire
>>>>>>>>>>>> folder. I hope this rough explanation helps someone. I was just
>>>>>>>>>>>> rambling.
>>>>>>>>>>>> lol
>>>>>>>>>>>>
>>>>>>>>>>>> GF
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On Jun 3, 2010, at 12:49 PM, Monkey Pusher wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> Given that i haven't used folders yet in reaper is it safe to 
>>>>>>>>>>>>> assume
>>>>>>>>>>>>> that reaper would announce if tracks are in a folder when you 
>>>>>>>>>>>>> have
>>>>>>>>>>>>> folders in use?
>>>>>>>>>>>>>
>>>>>>>>>>>>> On 6/3/10, clarence griffin <goldfingas at gmail.com> wrote:
>>>>>>>>>>>>>> you can't do that. you have to create blank tracks on either 
>>>>>>>>>>>>>> end of
>>>>>>>>>>>>>> a
>>>>>>>>>>>>>> set
>>>>>>>>>>>>>> of
>>>>>>>>>>>>>> tracks or track, then tell them that you want that to be a 
>>>>>>>>>>>>>> folder
>>>>>>>>>>>>>> by
>>>>>>>>>>>>>> pressing a set of keys. the folder creation isn't as easy as 
>>>>>>>>>>>>>> just
>>>>>>>>>>>>>> pressing 1
>>>>>>>>>>>>>> hot key.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> GF
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Jun 3, 2010, at 12:33 PM, T.Reid wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I don't think it's by default. I believe I must have 
>>>>>>>>>>>>>>> accidentally
>>>>>>>>>>>>>>> hit
>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>> shortcut key that created the folder.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> -----Original Message-----
>>>>>>>>>>>>>>> From: rwp-bounces at reaaccess.com 
>>>>>>>>>>>>>>> [mailto:rwp-bounces at reaaccess.com]
>>>>>>>>>>>>>>> On
>>>>>>>>>>>>>>> Behalf
>>>>>>>>>>>>>>> Of Jayson Smith
>>>>>>>>>>>>>>> Sent: Thursday, June 03, 2010 11:16 AM
>>>>>>>>>>>>>>> To: Reapers Without Peepers
>>>>>>>>>>>>>>> Subject: Re: [RWP] More on track selection problem
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>   As far as I know, I have never created or otherwise dealt 
>>>>>>>>>>>>>>> with
>>>>>>>>>>>>>>> any
>>>>>>>>>>>>>>> folders in my project. Do all tracks wind up in a default 
>>>>>>>>>>>>>>> folder
>>>>>>>>>>>>>>> of
>>>>>>>>>>>>>>> some
>>>>>>>>>>>>>>> kind even if you never tell them to?
>>>>>>>>>>>>>>> Jayson
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> ----- Original Message -----
>>>>>>>>>>>>>>> From: "T.Reid" <treid99 at gmail.com>
>>>>>>>>>>>>>>> To: "'Reapers Without Peepers'" <rwp at reaaccess.com>
>>>>>>>>>>>>>>> Sent: Thursday, June 03, 2010 11:01 AM
>>>>>>>>>>>>>>> Subject: Re: [RWP] More on track selection problem
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Check to be sure these tracks are not included in a folder. 
>>>>>>>>>>>>>>>> I had
>>>>>>>>>>>>>>>> a
>>>>>>>>>>>>>>>> problem
>>>>>>>>>>>>>>>> where I inadvertently included several tracks in a folder 
>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>> couldn't
>>>>>>>>>>>>>>>> select just one track.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> t
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> -----Original Message-----
>>>>>>>>>>>>>>>> From: rwp-bounces at reaaccess.com
>>>>>>>>>>>>>>>> [mailto:rwp-bounces at reaaccess.com]
>>>>>>>>>>>>>>>> On
>>>>>>>>>>>>>>>> Behalf
>>>>>>>>>>>>>>>> Of Derek Lane
>>>>>>>>>>>>>>>> Sent: Thursday, June 03, 2010 9:36 AM
>>>>>>>>>>>>>>>> To: Reapers Without Peepers
>>>>>>>>>>>>>>>> Subject: Re: [RWP] More on track selection problem
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> I'm just pressing the delete key, not control delete.
>>>>>>>>>>>>>>>> ----- Original Message -----
>>>>>>>>>>>>>>>> From: "Jayson Smith" <ratguy at insightbb.com>
>>>>>>>>>>>>>>>> To: "Reapers Without Peepers" <rwp at reaaccess.com>
>>>>>>>>>>>>>>>> Sent: Thursday, June 03, 2010 4:24 AM
>>>>>>>>>>>>>>>> Subject: [RWP] More on track selection problem
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Hi all,
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>  As you probably know, I am having a problem wherein, when 
>>>>>>>>>>>>>>>>> I try
>>>>>>>>>>>>>>>>> to
>>>>>>>>>>>>>>>>> delete material from only selected tracks, it acts as if 
>>>>>>>>>>>>>>>>> all
>>>>>>>>>>>>>>>>> tracks
>>>>>>>>>>>>>>>>> are
>>>>>>>>>>>>>>>>> selected. Monkey Pusher is having the exact same problem. 
>>>>>>>>>>>>>>>>> I know
>>>>>>>>>>>>>>>>> from
>>>>>>>>>>>>>>>>> a
>>>>>>>>>>>>>>>>> private Email that Derek is not having this problem.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> I even tried uninstalling Reaper and installing an old 
>>>>>>>>>>>>>>>>> version
>>>>>>>>>>>>>>>>> from
>>>>>>>>>>>>>>>>> January. Still with the latest ReaAccess. The problem 
>>>>>>>>>>>>>>>>> continues
>>>>>>>>>>>>>>>>> to
>>>>>>>>>>>>>>>>> happen,
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> which probably means there's not a bug in Reaper itself. 
>>>>>>>>>>>>>>>>> There
>>>>>>>>>>>>>>>>> could
>>>>>>>>>>>>>>>>> possibly be a bug in ReaAccess though.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> For reference, here are the exact keystrokes I am using. 
>>>>>>>>>>>>>>>>> Let's
>>>>>>>>>>>>>>>>> say
>>>>>>>>>>>>>>>>> I
>>>>>>>>>>>>>>>>> have
>>>>>>>>>>>>>>>>> a twelve-track project, and I want to delete material from 
>>>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>>>> beginning
>>>>>>>>>>>>>>>>> of the project to some arbitrary point, on all tracks 
>>>>>>>>>>>>>>>>> except
>>>>>>>>>>>>>>>>> track
>>>>>>>>>>>>>>>>> 1.
>>>>>>>>>>>>>>>>> Here's what I do.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Arrow up or down to get to track two.
>>>>>>>>>>>>>>>>> Shift+Down arrow ten times. The final report is, track 12, 
>>>>>>>>>>>>>>>>> 11
>>>>>>>>>>>>>>>>> tracks
>>>>>>>>>>>>>>>>> selected.
>>>>>>>>>>>>>>>>> Hit w to insure I am at the beginning of the project.
>>>>>>>>>>>>>>>>> Hit Shift+Alt+Left bracket to start my time selection.
>>>>>>>>>>>>>>>>> Hit Space to start playing, possibly use Page-Up and 
>>>>>>>>>>>>>>>>> Page-Down
>>>>>>>>>>>>>>>>> for
>>>>>>>>>>>>>>>>> faster
>>>>>>>>>>>>>>>>> movement. When I'm at the spot where I want the selection 
>>>>>>>>>>>>>>>>> to
>>>>>>>>>>>>>>>>> end,
>>>>>>>>>>>>>>>>> press
>>>>>>>>>>>>>>>>> Ctrl+Space to pause.
>>>>>>>>>>>>>>>>> Hit Shift+Alt+Right bracket to set the end of the time
>>>>>>>>>>>>>>>>> selection.
>>>>>>>>>>>>>>>>> Hit Ctrl+Del to delete the material.
>>>>>>>>>>>>>>>>> At this point, the relevant audio from tracks 2 through 12
>>>>>>>>>>>>>>>>> should
>>>>>>>>>>>>>>>>> be
>>>>>>>>>>>>>>>>> deleted, but not track 1. The problem is that track 1 is 
>>>>>>>>>>>>>>>>> being
>>>>>>>>>>>>>>>>> effected.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> What exact keystrokes are some of you guys who don't have 
>>>>>>>>>>>>>>>>> this
>>>>>>>>>>>>>>>>> problem
>>>>>>>>>>>>>>>>> using to accomplish the same effect? Did you change any 
>>>>>>>>>>>>>>>>> Reaper
>>>>>>>>>>>>>>>>> settings?
>>>>>>>>>>>>>>>>> Thanks for any help!
>>>>>>>>>>>>>>>>> Jayson
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>> RWP mailing list
>>>>>>>>>>>>>>>>> RWP at reaaccess.com
>>>>>>>>>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>> RWP mailing list
>>>>>>>>>>>>>>>> RWP at reaaccess.com
>>>>>>>>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> No virus found in this incoming message.
>>>>>>>>>>>>>>>> Checked by AVG - www.avg.com
>>>>>>>>>>>>>>>> Version: 9.0.829 / Virus Database: 271.1.1/2915 - Release 
>>>>>>>>>>>>>>>> Date:
>>>>>>>>>>>>>>>> 06/03/10
>>>>>>>>>>>>>>>> 02:25:00
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>> RWP mailing list
>>>>>>>>>>>>>>>> RWP at reaaccess.com
>>>>>>>>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>> RWP mailing list
>>>>>>>>>>>>>>> RWP at reaaccess.com
>>>>>>>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> No virus found in this incoming message.
>>>>>>>>>>>>>>> Checked by AVG - www.avg.com
>>>>>>>>>>>>>>> Version: 9.0.829 / Virus Database: 271.1.1/2915 - Release 
>>>>>>>>>>>>>>> Date:
>>>>>>>>>>>>>>> 06/03/10
>>>>>>>>>>>>>>> 02:25:00
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>> RWP mailing list
>>>>>>>>>>>>>>> RWP at reaaccess.com
>>>>>>>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>> RWP mailing list
>>>>>>>>>>>>>> RWP at reaaccess.com
>>>>>>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>> RWP mailing list
>>>>>>>>>>>>> RWP at reaaccess.com
>>>>>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>> RWP mailing list
>>>>>>>>>>>> RWP at reaaccess.com
>>>>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> RWP mailing list
>>>>>>>>>>> RWP at reaaccess.com
>>>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> RWP mailing list
>>>>>>>>>> RWP at reaaccess.com
>>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> --------------------------------------------------------------------------------
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> No virus found in this incoming message.
>>>>>>>>> Checked by AVG - www.avg.com
>>>>>>>>> Version: 9.0.829 / Virus Database: 271.1.1/2915 - Release Date: 
>>>>>>>>> 06/03/10
>>>>>>>>> 00:25:00
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> RWP mailing list
>>>>>>>>> RWP at reaaccess.com
>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>>
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> RWP mailing list
>>>>>>>> RWP at reaaccess.com
>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> RWP mailing list
>>>>>>> RWP at reaaccess.com
>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> RWP mailing list
>>>>>> RWP at reaaccess.com
>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> RWP mailing list
>>>>> RWP at reaaccess.com
>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>
>>>>> __________ Information from ESET NOD32 Antivirus, version of virus 
>>>>> signature database 5172 (20100604) __________
>>>>>
>>>>> The message was checked by ESET NOD32 Antivirus.
>>>>>
>>>>> http://www.eset.com
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> RWP mailing list
>>>> RWP at reaaccess.com
>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>
>>>
>>>
>>> _______________________________________________
>>> RWP mailing list
>>> RWP at reaaccess.com
>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>
>>
>> _______________________________________________
>> RWP mailing list
>> RWP at reaaccess.com
>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>
>
>
> _______________________________________________
> RWP mailing list
> RWP at reaaccess.com
> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com

More information about the Rwp mailing list