[RWP] More on track selection problem
Derek Lane
derek at pdaudio.net
Fri Jun 4 15:24:13 EDT 2010
you can consolidate audio for that track, but even if you make a selection
and delete, you'll notice 2 items. 1 the source material up to point of
deletion, and 2, the material after the deletion. Given rpp files are
loosly xml based, thats the only way to do it.
----- Original Message -----
From: "Jayson Smith" <ratguy at insightbb.com>
To: "Reapers Without Peepers" <rwp at reaaccess.com>
Sent: Friday, June 04, 2010 3:21 PM
Subject: Re: [RWP] More on track selection problem
> Hi,
>
> That seems to be working, but this brings up another question. Assuming
> the start and end points of the time selection are both in the middle of
> the project, this turns one item into three items. Item 1 is the part
> before the selection, item 2 is the selection, and item 3 is the part
> after the selection. Once item 2 is deleted, that still leaves two items.
> Now, item 1 is the part before the selection, and item 2 is the part after
> the selection. That's all fine and good if you're only doing one delete on
> the track, but what if you need to do multiple deletes, and have trouble
> keeping track of item numbers? What was once item 2 might be item 4 or 5
> before you're done. So, is there a quick and easy way to smash all items
> on a track down to one item? I know there's a "heal split" action, but no
> keyboard shortcut for it by default. Is this the only way, or is there a
> way to just wipe out all item splits on a track?
> Thanks!
> Jayson
>
> ----- Original Message -----
> From: "Derek Lane" <derek at pdaudio.net>
> To: "Reapers Without Peepers" <rwp at reaaccess.com>
> Sent: Friday, June 04, 2010 1:57 PM
> Subject: Re: [RWP] More on track selection problem
>
>
>> If you split the material you wish to delete in to a separate item by
>> selecting it, and pressing shift+s then navigating to that item, you can
>> easily delete just the one piece of track, keeping everything else in
>> time.
>> ----- Original Message -----
>> From: "Roger Smith" <snakeguy at insightbb.com>
>> To: "Reapers Without Peepers" <rwp at reaaccess.com>
>> Sent: Friday, June 04, 2010 1:54 PM
>> Subject: Re: [RWP] More on track selection problem
>>
>>
>>> Hi,
>>>
>>> I've been trying to get a better handle on exactly what is happening
>>> here. It seems that when you change tracks, all of the tracks stay
>>> selected and you can't unselect them with escape. In other words it's
>>> kind of like when you press the up or down arrow keys to change tracks
>>> the shift is on, except that it isn't. Monkey pusher, is this the same
>>> thing you are seeing? I really want to use this for my all around multi
>>> track recorder, but I have to be able to delete pieces of a track. Any
>>> ideas as to what settings might solve this problem?
>>> Thanks again,
>>> Snake
>>>
>>> ----- Original Message -----
>>> From: "Monkey Pusher" <monkeypusher69 at gmail.com>
>>> To: "Reapers Without Peepers" <rwp at reaaccess.com>
>>> Sent: Friday, June 04, 2010 11:55 AM
>>> Subject: Re: [RWP] More on track selection problem
>>>
>>>
>>>> lol i should smack myself for not remembering that tab under properties
>>>> thanks
>>>>
>>>> On 6/4/10, Scott Chesworth <scottchesworth at gmail.com> wrote:
>>>>> Hi Monkey,
>>>>>
>>>>> Hit Alt+Enter on your ReaAccess.exe file to pull up the properties,
>>>>> and then you need to move to the versions tab, Ctrl+Tab should get you
>>>>> there. You should find the version number listed there. Your method of
>>>>> checking the history file works just as well though.
>>>>>
>>>>> Hth
>>>>> Scott
>>>>>
>>>>> On 6/4/10, Monkey Pusher <monkeypusher69 at gmail.com> wrote:
>>>>>> where are you guys checking the property to see the version? Well i
>>>>>> pulled up the history log under the reaaccess start menu and the
>>>>>> first item is version 1.1.1.6 march 2010 so i am assuming its the
>>>>>> latest version i have installed.
>>>>>>
>>>>>> On 6/4/10, Scott Chesworth <scottchesworth at gmail.com> wrote:
>>>>>>> Hi Bob/Monkey,
>>>>>>>
>>>>>>> There's a reason that the version number isn't included in the
>>>>>>> ReaAccess.exe filename, that being so that the download link always
>>>>>>> remains the same to grab the latest stable build. FYI, older
>>>>>>> versions
>>>>>>> remain on the server, and they get archived with the version number
>>>>>>> included. An example path would be
>>>>>>> reaaccess.com/Downloads/ReaAccess1.1.1.5.exe
>>>>>>>
>>>>>>> Bob, what version number are you seeing in file properties? The
>>>>>>> latest
>>>>>>> is 1.1.1.6, and the version number seems to be accurate in the copy
>>>>>>> I
>>>>>>> just downloaded.
>>>>>>>
>>>>>>> Hth
>>>>>>> Scott
>>>>>>>
>>>>>>>
>>>>>>> On 6/4/10, Robert Logue <bobcat11 at telusplanet.net> wrote:
>>>>>>>> Yes please do include the version number in the reaaccess file
>>>>>>>> name. I
>>>>>>>> got
>>>>>>>> the latest file and when I checked it's properties, it was not the
>>>>>>>> version
>>>>>>>> number it should be so I don't know what I have without installing
>>>>>>>> it.
>>>>>>>>
>>>>>>>> Bob
>>>>>>>> ----- Original Message -----
>>>>>>>> From: "clarence griffin" <goldfingas at gmail.com>
>>>>>>>> To: "Reapers Without Peepers" <rwp at reaaccess.com>
>>>>>>>> Sent: Thursday, June 03, 2010 11:28 AM
>>>>>>>> Subject: Re: [RWP] More on track selection problem
>>>>>>>>
>>>>>>>>
>>>>>>>>>I wish we had a place where we could upload presets and stuff like
>>>>>>>>>this
>>>>>>>>> so
>>>>>>>>>we all could share...
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Jun 3, 2010, at 1:24 PM, Monkey Pusher wrote:
>>>>>>>>>
>>>>>>>>>> no rambling it made sense and comfirmed that i don't have my
>>>>>>>>>> stuff in
>>>>>>>>>> folders
>>>>>>>>>> Thanks .. Now i am starting to wonder if maybe its a bug in the
>>>>>>>>>> version of ReaAccess that myself and Jason are using. Derek
>>>>>>>>>> since you
>>>>>>>>>> aren't having this issue can you please send the installer for
>>>>>>>>>> reaaccess that you used to install it so we may try this out.
>>>>>>>>>> Also
>>>>>>>>>> may i suggest that going forward we include the version number in
>>>>>>>>>> the
>>>>>>>>>> reaaccess .exe file instead of it just being reaaccess.exe?
>>>>>>>>>>
>>>>>>>>>> On 6/3/10, clarence griffin <goldfingas at gmail.com> wrote:
>>>>>>>>>>> each folder is in the list just like tracks. if you arrow up and
>>>>>>>>>>> down,
>>>>>>>>>>> you
>>>>>>>>>>> will see the folder names. when you create folders its good to
>>>>>>>>>>> name
>>>>>>>>>>> them
>>>>>>>>>>>
>>>>>>>>>>> so
>>>>>>>>>>> you can know what they are. folders act just like buses. so
>>>>>>>>>>> anything
>>>>>>>>>>> you
>>>>>>>>>>>
>>>>>>>>>>> do
>>>>>>>>>>> to that folder, affects all tracks with in the folders.
>>>>>>>>>>> The way to create a folder is to first make sure you are above
>>>>>>>>>>> the
>>>>>>>>>>> tracks
>>>>>>>>>>> you want to place in a folder and create a new track with
>>>>>>>>>>> control t.
>>>>>>>>>>> After
>>>>>>>>>>> that go to the bottom of the last track you wish to include in
>>>>>>>>>>> that
>>>>>>>>>>> folder
>>>>>>>>>>> and press control t again, Note that when creating these tracks,
>>>>>>>>>>> you
>>>>>>>>>>> want to
>>>>>>>>>>> give them the name of the folder, they will become the folder in
>>>>>>>>>>> the
>>>>>>>>>>> next
>>>>>>>>>>> steps.
>>>>>>>>>>> After you have a blank track at the top and bottom of the tracks
>>>>>>>>>>> you
>>>>>>>>>>> wish to
>>>>>>>>>>> place in the folder, move to the first black track that you
>>>>>>>>>>> created
>>>>>>>>>>> at
>>>>>>>>>>> the
>>>>>>>>>>> top of the list of tracks, then press shift enter. you will hear
>>>>>>>>>>> it
>>>>>>>>>>> say
>>>>>>>>>>> "folder."
>>>>>>>>>>> Then go to the end of last blank track you created at the bottom
>>>>>>>>>>> of
>>>>>>>>>>> the
>>>>>>>>>>> list
>>>>>>>>>>> of tracks and press shift enter twice, that will then say end of
>>>>>>>>>>> folder.
>>>>>>>>>>>
>>>>>>>>>>> If
>>>>>>>>>>> you now go to the top folder again that you just created, and
>>>>>>>>>>> press
>>>>>>>>>>> enter on
>>>>>>>>>>> it, it wwill now have 3 states. Small, close, and open. The only
>>>>>>>>>>> ones
>>>>>>>>>>> that
>>>>>>>>>>> mean anything to us are open and close. Small looks just like
>>>>>>>>>>> open.
>>>>>>>>>>> When
>>>>>>>>>>>
>>>>>>>>>>> you
>>>>>>>>>>> close the folder, all you will see is that folder name. To get
>>>>>>>>>>> to the
>>>>>>>>>>> tracks
>>>>>>>>>>> that are in the folder, you must press enter and then it will
>>>>>>>>>>> open,
>>>>>>>>>>> you
>>>>>>>>>>> can
>>>>>>>>>>> then see the tracks with in the folder once more. You will be
>>>>>>>>>>> able to
>>>>>>>>>>> turn
>>>>>>>>>>> all the tracks up and down with in the folder by pressing alt up
>>>>>>>>>>> and
>>>>>>>>>>> down
>>>>>>>>>>> arrow on the folder. The same thing applies to adding fx and
>>>>>>>>>>> stuff
>>>>>>>>>>> like
>>>>>>>>>>> that. when you press F on the folder, it will open the fx for
>>>>>>>>>>> the
>>>>>>>>>>> entire
>>>>>>>>>>> folder. I hope this rough explanation helps someone. I was just
>>>>>>>>>>> rambling.
>>>>>>>>>>> lol
>>>>>>>>>>>
>>>>>>>>>>> GF
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On Jun 3, 2010, at 12:49 PM, Monkey Pusher wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Given that i haven't used folders yet in reaper is it safe to
>>>>>>>>>>>> assume
>>>>>>>>>>>> that reaper would announce if tracks are in a folder when you
>>>>>>>>>>>> have
>>>>>>>>>>>> folders in use?
>>>>>>>>>>>>
>>>>>>>>>>>> On 6/3/10, clarence griffin <goldfingas at gmail.com> wrote:
>>>>>>>>>>>>> you can't do that. you have to create blank tracks on either
>>>>>>>>>>>>> end of
>>>>>>>>>>>>> a
>>>>>>>>>>>>> set
>>>>>>>>>>>>> of
>>>>>>>>>>>>> tracks or track, then tell them that you want that to be a
>>>>>>>>>>>>> folder
>>>>>>>>>>>>> by
>>>>>>>>>>>>> pressing a set of keys. the folder creation isn't as easy as
>>>>>>>>>>>>> just
>>>>>>>>>>>>> pressing 1
>>>>>>>>>>>>> hot key.
>>>>>>>>>>>>>
>>>>>>>>>>>>> GF
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Jun 3, 2010, at 12:33 PM, T.Reid wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> I don't think it's by default. I believe I must have
>>>>>>>>>>>>>> accidentally
>>>>>>>>>>>>>> hit
>>>>>>>>>>>>>> the
>>>>>>>>>>>>>> shortcut key that created the folder.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> -----Original Message-----
>>>>>>>>>>>>>> From: rwp-bounces at reaaccess.com
>>>>>>>>>>>>>> [mailto:rwp-bounces at reaaccess.com]
>>>>>>>>>>>>>> On
>>>>>>>>>>>>>> Behalf
>>>>>>>>>>>>>> Of Jayson Smith
>>>>>>>>>>>>>> Sent: Thursday, June 03, 2010 11:16 AM
>>>>>>>>>>>>>> To: Reapers Without Peepers
>>>>>>>>>>>>>> Subject: Re: [RWP] More on track selection problem
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> As far as I know, I have never created or otherwise dealt
>>>>>>>>>>>>>> with
>>>>>>>>>>>>>> any
>>>>>>>>>>>>>> folders in my project. Do all tracks wind up in a default
>>>>>>>>>>>>>> folder
>>>>>>>>>>>>>> of
>>>>>>>>>>>>>> some
>>>>>>>>>>>>>> kind even if you never tell them to?
>>>>>>>>>>>>>> Jayson
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> ----- Original Message -----
>>>>>>>>>>>>>> From: "T.Reid" <treid99 at gmail.com>
>>>>>>>>>>>>>> To: "'Reapers Without Peepers'" <rwp at reaaccess.com>
>>>>>>>>>>>>>> Sent: Thursday, June 03, 2010 11:01 AM
>>>>>>>>>>>>>> Subject: Re: [RWP] More on track selection problem
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Check to be sure these tracks are not included in a folder.
>>>>>>>>>>>>>>> I had
>>>>>>>>>>>>>>> a
>>>>>>>>>>>>>>> problem
>>>>>>>>>>>>>>> where I inadvertently included several tracks in a folder
>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>> couldn't
>>>>>>>>>>>>>>> select just one track.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> t
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> -----Original Message-----
>>>>>>>>>>>>>>> From: rwp-bounces at reaaccess.com
>>>>>>>>>>>>>>> [mailto:rwp-bounces at reaaccess.com]
>>>>>>>>>>>>>>> On
>>>>>>>>>>>>>>> Behalf
>>>>>>>>>>>>>>> Of Derek Lane
>>>>>>>>>>>>>>> Sent: Thursday, June 03, 2010 9:36 AM
>>>>>>>>>>>>>>> To: Reapers Without Peepers
>>>>>>>>>>>>>>> Subject: Re: [RWP] More on track selection problem
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I'm just pressing the delete key, not control delete.
>>>>>>>>>>>>>>> ----- Original Message -----
>>>>>>>>>>>>>>> From: "Jayson Smith" <ratguy at insightbb.com>
>>>>>>>>>>>>>>> To: "Reapers Without Peepers" <rwp at reaaccess.com>
>>>>>>>>>>>>>>> Sent: Thursday, June 03, 2010 4:24 AM
>>>>>>>>>>>>>>> Subject: [RWP] More on track selection problem
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Hi all,
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> As you probably know, I am having a problem wherein, when
>>>>>>>>>>>>>>>> I try
>>>>>>>>>>>>>>>> to
>>>>>>>>>>>>>>>> delete material from only selected tracks, it acts as if
>>>>>>>>>>>>>>>> all
>>>>>>>>>>>>>>>> tracks
>>>>>>>>>>>>>>>> are
>>>>>>>>>>>>>>>> selected. Monkey Pusher is having the exact same problem. I
>>>>>>>>>>>>>>>> know
>>>>>>>>>>>>>>>> from
>>>>>>>>>>>>>>>> a
>>>>>>>>>>>>>>>> private Email that Derek is not having this problem.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> I even tried uninstalling Reaper and installing an old
>>>>>>>>>>>>>>>> version
>>>>>>>>>>>>>>>> from
>>>>>>>>>>>>>>>> January. Still with the latest ReaAccess. The problem
>>>>>>>>>>>>>>>> continues
>>>>>>>>>>>>>>>> to
>>>>>>>>>>>>>>>> happen,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> which probably means there's not a bug in Reaper itself.
>>>>>>>>>>>>>>>> There
>>>>>>>>>>>>>>>> could
>>>>>>>>>>>>>>>> possibly be a bug in ReaAccess though.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> For reference, here are the exact keystrokes I am using.
>>>>>>>>>>>>>>>> Let's
>>>>>>>>>>>>>>>> say
>>>>>>>>>>>>>>>> I
>>>>>>>>>>>>>>>> have
>>>>>>>>>>>>>>>> a twelve-track project, and I want to delete material from
>>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>>> beginning
>>>>>>>>>>>>>>>> of the project to some arbitrary point, on all tracks
>>>>>>>>>>>>>>>> except
>>>>>>>>>>>>>>>> track
>>>>>>>>>>>>>>>> 1.
>>>>>>>>>>>>>>>> Here's what I do.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Arrow up or down to get to track two.
>>>>>>>>>>>>>>>> Shift+Down arrow ten times. The final report is, track 12,
>>>>>>>>>>>>>>>> 11
>>>>>>>>>>>>>>>> tracks
>>>>>>>>>>>>>>>> selected.
>>>>>>>>>>>>>>>> Hit w to insure I am at the beginning of the project.
>>>>>>>>>>>>>>>> Hit Shift+Alt+Left bracket to start my time selection.
>>>>>>>>>>>>>>>> Hit Space to start playing, possibly use Page-Up and
>>>>>>>>>>>>>>>> Page-Down
>>>>>>>>>>>>>>>> for
>>>>>>>>>>>>>>>> faster
>>>>>>>>>>>>>>>> movement. When I'm at the spot where I want the selection
>>>>>>>>>>>>>>>> to
>>>>>>>>>>>>>>>> end,
>>>>>>>>>>>>>>>> press
>>>>>>>>>>>>>>>> Ctrl+Space to pause.
>>>>>>>>>>>>>>>> Hit Shift+Alt+Right bracket to set the end of the time
>>>>>>>>>>>>>>>> selection.
>>>>>>>>>>>>>>>> Hit Ctrl+Del to delete the material.
>>>>>>>>>>>>>>>> At this point, the relevant audio from tracks 2 through 12
>>>>>>>>>>>>>>>> should
>>>>>>>>>>>>>>>> be
>>>>>>>>>>>>>>>> deleted, but not track 1. The problem is that track 1 is
>>>>>>>>>>>>>>>> being
>>>>>>>>>>>>>>>> effected.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> What exact keystrokes are some of you guys who don't have
>>>>>>>>>>>>>>>> this
>>>>>>>>>>>>>>>> problem
>>>>>>>>>>>>>>>> using to accomplish the same effect? Did you change any
>>>>>>>>>>>>>>>> Reaper
>>>>>>>>>>>>>>>> settings?
>>>>>>>>>>>>>>>> Thanks for any help!
>>>>>>>>>>>>>>>> Jayson
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>> RWP mailing list
>>>>>>>>>>>>>>>> RWP at reaaccess.com
>>>>>>>>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>> RWP mailing list
>>>>>>>>>>>>>>> RWP at reaaccess.com
>>>>>>>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> No virus found in this incoming message.
>>>>>>>>>>>>>>> Checked by AVG - www.avg.com
>>>>>>>>>>>>>>> Version: 9.0.829 / Virus Database: 271.1.1/2915 - Release
>>>>>>>>>>>>>>> Date:
>>>>>>>>>>>>>>> 06/03/10
>>>>>>>>>>>>>>> 02:25:00
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>> RWP mailing list
>>>>>>>>>>>>>>> RWP at reaaccess.com
>>>>>>>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>> RWP mailing list
>>>>>>>>>>>>>> RWP at reaaccess.com
>>>>>>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> No virus found in this incoming message.
>>>>>>>>>>>>>> Checked by AVG - www.avg.com
>>>>>>>>>>>>>> Version: 9.0.829 / Virus Database: 271.1.1/2915 - Release
>>>>>>>>>>>>>> Date:
>>>>>>>>>>>>>> 06/03/10
>>>>>>>>>>>>>> 02:25:00
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>> RWP mailing list
>>>>>>>>>>>>>> RWP at reaaccess.com
>>>>>>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>> RWP mailing list
>>>>>>>>>>>>> RWP at reaaccess.com
>>>>>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>> RWP mailing list
>>>>>>>>>>>> RWP at reaaccess.com
>>>>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> RWP mailing list
>>>>>>>>>>> RWP at reaaccess.com
>>>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> RWP mailing list
>>>>>>>>>> RWP at reaaccess.com
>>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> RWP mailing list
>>>>>>>>> RWP at reaaccess.com
>>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>
>>>>>>>>
>>>>>>>> --------------------------------------------------------------------------------
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> No virus found in this incoming message.
>>>>>>>> Checked by AVG - www.avg.com
>>>>>>>> Version: 9.0.829 / Virus Database: 271.1.1/2915 - Release Date:
>>>>>>>> 06/03/10
>>>>>>>> 00:25:00
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> RWP mailing list
>>>>>>>> RWP at reaaccess.com
>>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> RWP mailing list
>>>>>>> RWP at reaaccess.com
>>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> RWP mailing list
>>>>>> RWP at reaaccess.com
>>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> RWP mailing list
>>>>> RWP at reaaccess.com
>>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>>
>>>>
>>>> _______________________________________________
>>>> RWP mailing list
>>>> RWP at reaaccess.com
>>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>>
>>>> __________ Information from ESET NOD32 Antivirus, version of virus
>>>> signature database 5172 (20100604) __________
>>>>
>>>> The message was checked by ESET NOD32 Antivirus.
>>>>
>>>> http://www.eset.com
>>>>
>>>>
>>>>
>>>
>>>
>>> _______________________________________________
>>> RWP mailing list
>>> RWP at reaaccess.com
>>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>>>
>>
>>
>> _______________________________________________
>> RWP mailing list
>> RWP at reaaccess.com
>> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>
>
> _______________________________________________
> RWP mailing list
> RWP at reaaccess.com
> http://reaaccess.com/mailman/listinfo/rwp_reaaccess.com
>
More information about the Rwp
mailing list