[DECtalk] Access 32 On Windows 7

[Michael Hansen]

When I tried starting JAWS after uninstalling Eloquence with the
latest DECtalk drivers installed, I got an error saying shared
components were missing.  Am I not doing something correctly?

On 5/9/11, Brandon Misch <bmisch2002 at gmail.com> wrote:
> with the original release of jaws 10 you don't need to do that since it
> worked then. however, if it's a later version you probably need to
>
> On May 9, 2011, at 7:55 AM, Michael Hansen wrote:
>
>> I tried uninstalling Eloquence, with the JAWS 12 Access 32 driver back
>> in, and I am still getting the shared components error.  I'll perhaps
>> try this with JAWS 10 and see what happens.
>>
>> On 5/9/11, Michael Hansen <amtk62 at gmail.com> wrote:
>>> Thanks for that, Brandon...I didn't try going back to the JAWS 12
>>> Access 32 driver.  I'll try that and let you guys know.
>>>
>>> On 5/9/11, Brandon Misch <bmisch2002 at gmail.com> wrote:
>>>> well, before you did that did you replace the access 32 jaws driver or
>>>> was
>>>> the one you got out of jaws 10 still there? think you have to go back to
>>>> the
>>>> driver that is in with jaws 12 to get this to work. me personally, i am
>>>> glad
>>>> i have a dectalk u s b otherwise, i would still be sending fs emails
>>>> about
>>>> broken access 32 support.
>>>>
>>>> On May 9, 2011, at 1:25 AM, Michael Hansen wrote:
>>>>
>>>>> Well, I got an error from JAWS 12 when I tried starting JAWS after
>>>>> uninstalling Eloquence.  What version did you try this with, and did
>>>>> you have this problem?  Thanks, Michael
>>>>>
>>>>> On 5/8/11, Michael Hansen <amtk62 at gmail.com> wrote:
>>>>>> Thanks, Alex!  I'll give that a shot!  If I have trouble, I'll
>>>>>> reinstall JAWS--I also have NVDA.
>>>>>>
>>>>>> On 5/8/11, Alex H. <linuxx64.bashsh at gmail.com> wrote:
>>>>>>> Hi,
>>>>>>>
>>>>>>> try uninstalling Eloquence. It's a dirty rotten hack, but it works.
>>>>>>> Also, it's perminent, so DT only gets used.
>>>>>>>
>>>>>>> When I did this when I still used JAWS, there was some wierd
>>>>>>> parameter
>>>>>>> values and I had to play with the rate and pitch sliders for them to
>>>>>>> snap back into action.
>>>>>>>
>>>>>>> HTH,
>>>>>>> Alex
>>>>>>>
>>>>>>> On 5/7/11, Michael Hansen <amtk62 at gmail.com> wrote:
>>>>>>>> Hi guys,
>>>>>>>>
>>>>>>>> I just recently obtained a copy of DECtalk Access 32 from school.
>>>>>>>> This is the version of DECtalk distributed with Kurzweil 1000.  Is
>>>>>>>> there any way of making it work with JAWS on Windows 7?  The program
>>>>>>>> runs--it shows as running in task manager--but it is still not
>>>>>>>> working
>>>>>>>> with JAWS.
>>>>>>>>
>>>>>>>> Thanks,
>>>>>>>> Michael
>>>>>>>> _______________________________________________
>>>>>>>> DECtalk mailing list
>>>>>>>> DECtalk at bluegrasspals.com
>>>>>>>> http://bluegrasspals.com/mailman/listinfo/dectalk
>>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> DECtalk mailing list
>>>>>>> DECtalk at bluegrasspals.com
>>>>>>> http://bluegrasspals.com/mailman/listinfo/dectalk
>>>>>>>
>>>>>>
>>>>> _______________________________________________
>>>>> DECtalk mailing list
>>>>> DECtalk at bluegrasspals.com
>>>>> http://bluegrasspals.com/mailman/listinfo/dectalk
>>>>
>>>>
>>>> _______________________________________________
>>>> DECtalk mailing list
>>>> DECtalk at bluegrasspals.com
>>>> http://bluegrasspals.com/mailman/listinfo/dectalk
>>>>
>>>
>> _______________________________________________
>> DECtalk mailing list
>> DECtalk at bluegrasspals.com
>> http://bluegrasspals.com/mailman/listinfo/dectalk
>
>
> _______________________________________________
> DECtalk mailing list
> DECtalk at bluegrasspals.com
> http://bluegrasspals.com/mailman/listinfo/dectalk
>